Whirlpool WAE 7000 BK, WAK/D 7414 EX INSTRUCTION FOR USE

40105394GB.fm Page 1 Friday, June 15, 2007 10:37 AM

GB PROGRAMME CHART

A. “Door open” indication This washing machine is equipped with

automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B. “Service” indication C. “Water tap closed” indication D. “Clean pump” indication

Programme

White Cotton /

Antibacterial

Cotton

SuperEco

Synthetics

Bomuld

Hygiene+

Bomuld

SuperEco

Syntetisk

Tempe-

rature

70 - 95 °C 50 - 60 °C

20 - 40 °C

20 - 60 °C

Care

Labels

Max

Load

- For temperature selection, respect the manufacturer’s

recommendations on the care label

7.0

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen. At a temperature of 80°C or more, this programme eliminates bacteria, ensuring

7.0

sanitization of your laundry. The bacteria removal efficiency has been tested following a similar methodology to the NF EN 13697 standard of Nov. 2001.

7.0

Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Offers highest economy in energy consumption by prolonged washing duration. Ideal

7.0

to be run overnight to additionally profit from the more favourable energy rates. To avoid noise of spinning at night, set spin speed to “0” and start spin programme in the morning, or define programme start with “Start delay” accordingly.

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira),

3.5

polyamide (Perlon, Nylon) or blends with cotton.

Type of wash/Notes

C D

E. Programme selector

F. “Start/Pause” button G. “Variable spin” button H. Programme sequence indicator

A B

I. “Reset” button

J. “Start delay” button K. “Temperature” button L. Display M. “Favourite” button

Pre-

Rinse

hold

Skylle-

stop

Intensive

Ekstra

wash

For-

vask

❉❉

rinse

skyl

Easy

ironing

Strygelet

—

Main

Wash

Yes

Softener Eco

Øko

❉❉❉❉ ❉ ❉

——

❉

❉❉❉❉ ❉ ❉

MF K

Detergents and additives Special options Start

Pre-

wash

❉

—

❉

delay

Udskudt

start

❉

Variable

spin

Centr.

❉

Spin

Max Spin

Speed

rpm

max.

1000

Daily load

Quick wash

Jeans

Delicates

Wool

Handwash

Rinse & Spin

Spin

Gentle Spin

Drain

❉

: optional / Yes : dosing required

For improved garment care, spin speed is restricted in these programmes.

Do not use liquid detergent when activating the Start Delay.

Do not use liquid detergent for the main wash when activating the Prewash option.

Dagligvask

Quick vask

30min.

Jeans

Skåneprogram

Uld

Håndvask

Skyl &

Centrifugering Centrifugering

Skånsom

Centrifugering

Tømning

20 - 60 °C

20 - 30 °C 20 - 60 °C

20 - 40 °C 20 - 40 °C

20 - 40 °C

—— —— —— ——

5.0

7.0

2.5

2.0

7.0

2.0 —

Slightly to normally soiled textiles made of cotton and/or synthetics.

Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton.

Normally soiled cotton jeanswear and garments made of robust jeanslike material such as trousers and jackets.

Curtains and delicate clothing, dresses skirts, shirts and blouses. Only woollens, labelled with the Woolmark and identified as machine washable.

This programme (40°C) is tested and approved by The Woolmark Company for machine washable wool.

Textiles made of silk, linen, wool and viscose marked as “handwashable”. This programme (40°C) is tested and approved by The Woolmark Company for handwashable wool.

Same as the last rinse and the final spin in the “Cotton” programme. In this programme spinning is intensive. Same as the spin cycle in the “Cotton”

programme. In this programme spinning is gentle. Same as the spin cycle in the “Wool”

programme. Drain only - no spinning. Alternative method of terminating programme after “Rinse

Hold”.

The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of Woolmark garme nts labelled as “machine wash” or “hand wash” pr ovided that the garments are washed according to the instructions on the garment label and those issued in this programme chart.

Yes

—

Yes

—

Yes Yes

Yes

❉ ❉

—

— ——

——

❉ ❉

——

❉❉ ❉ ❉

❉❉❉❉

—

❉ ❉

❉❉

——

—— ——

❉

❉ ❉❉

—— ——

——

— ——————— — ——————— —

❉

❉❉ ❉❉ ❉❉

——————— — ——

M0701

5019 401 05394

max.

❉

max.

❉

max.

❉

1000 1000

400

❉ ❉

❉

max. max.

1000

—

40105394GB.fm Page 2 Friday, June 15, 2007 10:37 AM

CONSUMPTION DATA

Programme

Temperature

(°C)

White Cotton / Antibacterial 95 7.0 70

Load

(kg)

Water

(l)

Energy

(kWh)

Approx. Programme Duration

(hours : minutes)

2.10 2:10

Cotton 60 7.0 65 1.33 2:10

Cotton with “Eco”

***

60 7.0 60 1.19 2:20

Cotton 40 7.0 65 0.75 2:05

SuperEco 60 7.0 62 0.84 4:00

Synthetics 60 3.5 48

0.95 1:35

Synthetics 40 3.5 44 0.55 1:20 Daily load 40 5.0 66 0.60 1:00

Quick wash 30 5.0 60 0.30 0:30

Jeans 40 7.0 85 0.75 2:20

Delicates 30 2.5 60 0.45 0:50

Wool 40 2.0 60 0.65 0:45

Handwash 40 2.0 45 0.65 0:40

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

The time indicated on the display can deviate from the values in the table, because it takes into account the household conditions

applicable at that time. To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

Reference Programme for Energy Label.

***

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use.

1. Turn the

2. The

3. The indication lamp of the predefined

programme selector

programme. The display shows the programme duration in hours and minutes as well as the predefined temperature. The

temperature

“Temperature” button. lights up; in case you want to set another spin speed,

press the “Variable spin” button.

“Start/Pause”

can be altered by pressing the

to the desired

button flashes.

spin speed

SELECT ANY DESIRED OPTION

Push the button(s) of any option(s) desired - the respective indication lights up. When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Prewash” button

• Only for heavily soiled loads (for example sand, granular dirt) sensible. Increases the cycle time by approximately 15 min.

• Do not use liquid detergent for the main wash when activating the Prewash option.

“Rinse hold” button

• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.

• This option is particularly recommended for the programmes “Synthetics”, “Daily load” and “Delicates”.

• It is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.

• If you select “Rinse hold”, do not leave the laundry to soak for too long.

The programme stops to “Rinse hold” at the

Note:

time the “Rinse hold” light in the programme sequence indicator is on. The indication lamp next to the

button flashes.

Pause”

Terminate the “Rinse hold” option:

• P ress the terminate automatically with the final spin cycle for the present wash programme.

• If you do not wish to spin the clothes, turn the programme selector to the “Drain” programme and press the

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft water, washing baby linen and helps people with allergies.

“Easy ironing” button

• Can be used together with “Cotton”, “Synthetics” and “Daily load” programmes to make ironing easier.

• Increases the water quantity and the clothes are spun very gently.

“Variable spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during rinse. The water is drained out only.

“Start/Pause”

button; the programme will

button.

“Start/

“Eco” button

• With a modified temperature profile and a slightly prolonged washing duration, the optimum combination of excellent washing result and even lower energy consumption is achieved.

SAVE YOUR FAVOURITE PROGRAMMES

If there is a programme setting which you use frequently, the appliance offers the possibility to save one setting for each programme so that it can be used again by just pushing one button.

• Select the desired programme, temperature, spin speed and option(s), push and hold the at least 3 seconds. The lamp next to flashes and then lights up - the programme setting is saved.

Next time you want to use your individual programme setting, select the programme, push the button and start by pushing

If you want to replace the saved programme setting by another one:

• Push the programme button, select temperature, spin speed and options as desired and then press and hold the

“Favourites”

saved programme setting will be replaced by the new one.

button for at least 3 seconds. The previously

“Favourites”

“Start/Pause”

button for

shortly

“Favourites”

START DELAY

The “Start Delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating the “Start Delay”.

• Select programme, temperature and options.

• Press the “Start Delay” button to select the delay time by 1 to 23 hours;

•Press the

• The time delay indication disappears when the

• Once having pressed the

To cancel the “Start Delay” ..before you press the “Start/Pause” button:

• Turn the programme selector to another position or

..after having pressed the “Start/Pause” button:

• Press the

“Start/Pause”

The indication light next to the “Start Delay” button lights up and the countdown of the delay time begins. During the countdown, the light over the “Start Delay” button and the dot between hours and minutes on the display flashes.

programme starts and it is replaced by the remaining programme time.

number of hours preselected can be reduced by pressing and holding the “Start Delay” button. From 1 hour on, the delay time can also be reduced in steps of 10 minutes.

press the

start delay time disappears from the display.

“Reset” “Reset”

button.

“Start/Pause”

button. button for at least 3 seconds - the

button, the

PROGR AMME START

Open the tap and press the indication lamp over the The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain.

“Start/Pause”

button. The

button lights up.

The display shows the remaining programme time. Due to variations in load and temperature of inlet water, the remaining time is newly calculated in certain programme phases. If this is the case,

display

an animation appears on the

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.

RED INDICATIONS

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your Instructions for Use; if the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in your Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”).

PROGRAMME END

• All the lights of the programme sequence indicator are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the programme. The light flashes.

2. Select the new programme, temperature, any options and another spin speed if you want.

3. Press the programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

“Start/Pause”

button to pause the

button again. The new

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

The

• Press the

button cancels a programme before the end.

“Reset”

existing water is drained out before the door can be opened.

button for at least 3 seconds. Any

“Reset”

5019 401 05394

Whirlpool WAE 7000 BK, WAK/D 7414 EX INSTRUCTION FOR USE

Specifications and Main Features

Frequently Asked Questions

User Manual