Whirlpool WAD SYMPHONY 1460 INSTRUCTION FOR USE
4gb05144.fm Page 1 Tuesday, May 4, 2004 2:34 PM
GB WAD SYMPHONY 1460 PROGRAMME GUIDE
This washing machine is equipped with
automatic safety functions
at an early stage and react appropriately, e.g.:
A. “Water Tap closed” indicator
Check your washing machine's water supply.
Programme
Cotton Kookwas
Synthetic Synthetisch
Daily Mixed
Delicate Fijne was
Wool Wol
Gemengde was
which detect faults
Care
Labels
Type of wash/
Degree of soiling
Normally to heavily soiled bed linen,
table linen and underwear , towels,
shirts etc. made of cotton and linen.
Normally soiled blouses, shirts and
other outer clothing made of
polyester (Diolen, Trevira),
polyamide (Perlon, Nylon) or
mixtures of these fibres with cotton.
Slightly to normally soiled textiles
made of cotton and/or synthetic
fibres.
Curtains and delicate dresses, skirts,
shirts and blouses.
Only woollens with a felt-free finish,
labelled with the woolmark and
identified as machine washable.
A
B
D
C
Max.
Detergent and Additives Selectable special options =
load
Softe-
Kg
6.0
2.5
3.0
1.5
1.0
ner
❉
❉
❉
❉
❉
Main
wash
Yes
Yes
Yes
Yes
Yes
E
Pre-
wash
Pre-
Intensive
wash
Voor-
Intensief
was
Spoelen
❉❉❉❉❉ ❉❉
❉❉❉❉❉
––
❉❉
–––
G
{
F
❉
Rinse
Rinse
Spoel-
❉❉❉ ❉
–
Speed
hold
reduction
Centrifu-
stop
geren
1)
1)
❉❉
❉❉
1)
Easy
ironing
Makkelijk
Strijken
❉❉
––
––
Eco+
Eco+
–
B. “Door Locked” indicator
C. “Start/Pause” button
D.Programme sequence indicator
E. Temperature selection buttons
F. “Speed Reduction” button
G. Operation indicators
Tem pe-
rature
°C rpm
20
to 95
20
to 60
30
to 60
20
to 40
20
to 40
Max.
spin
speed
1400
1000
1400
1000
1000
“Prewash” can be additionally
selected for heavily soiled laundry at
any temperature.
“Prewash” can be additionally
1)
selected for heavily soiled laundry .
In this programme the spin speed
should be adapted to the fabrics.
1)
If you select “Rinse Hold” do not
1)
leave items to soak for too long.
Notes
–
Rapid wash Snelwas
Handwash
Rinse +
Spin
Intensive Spin
Gentle spin
Drain / Cancel
1)
For improved garment care spin speed is restricted to 1000 rpm in this programme.
2)
For improved garment care spin speed is restricted to 400 rpm in this programme.
Black process 45.0° 100.0 LPI
Handwas
Spoelen+Centrif.
Intensief Centrif.
Centrifugeren
Afpompen /
Reset
Hardly worn outer and sport
clothing made of cotton, polyester,
polyamid and mixed cotton fabrics.
Textiles made of linen, silk, wool or
viscose marked as “handwashable”.
––
––
––
––––––––––––––
3.0
1.0
6.0
6.0
1.5
Yes
❉
Yes
❉
❉
–––
–––
–––
❉❉❉
❉❉
❉❉
––––––
––––––
––
2)
––
––
❉
❉
–––
1)
–––
20
to 60
20
to 30
20 1400
1400
400
1400
1000
–
If you select “Rinse Hold” do not leave
2)
items to soak for too long. A very
gentle spin is used in this programme.
Same as the spin cycle in the “Cotton”
programme.
In this programme spinning is
intensive. Same as the spin cycle in the
“Cotton” programme.
A very gentle spin is used in this
1)
programme. Same as the spin cycle
in the “Wool” programme.
This programme only drains
(alternative method of terminating the
programme after “Rinse Hold” without
spinning). In addition all running
programmes can be cancelled with this
programme.
5019 401 05144
4gb05144.fm Page 2 Tuesday, May 4, 2004 2:34 PM
CONSUMPTION DATA*
Programme Temperature
(°C)
Cotton 95 6.0 49*** 1.90 2:00
Cotton 60 6.0 44 1.14 2:20
Cotton with “Eco+”**** 60 6.0 44 1.02 2:30
Cotton 40 5.0 42 0.70 2:00
Daily Mixed 40 3.0 43 0.55 1:00
Synthetic 60 2.5 55*** 0.70 1:30
Synthetic 40 2.5 50 0.50 1:15
Delicate 30 1.5 60 0.50 0:45
Wool 40 1.0 60 0.50 0:40
Rapid wash 30 3.0 37 0.40 0:30
Handwash 30 1.0 45 0.40 0:35
* Consumption
** The
programme duration
and to adapt the programme run time accordingly.
*** To reduce
water out.
*** Reference Programme for Energy Label
were measured in normalized conditions in compliance with Standard IEC/EN 60456.
values
the water temperature
may also vary from the chart values. The washing machine is able to allow for partic ular household conditio ns
, some cold water is added at the end of the main wash cycle, before the pump drains the
POUR IN DETERGENT, CLOSE THE
DOOR AND SELECT A PROGRAMME
Add the detergent as described in the chapter
“Detergent and Additives” in the booklet.
1. Turn the programme selector knob in any
direction to the desired programme.
The pilot lamp above the “Start/Pause” button
is flashing.
2. The programme sequence indicator and the
indicator with the maximum possible spin speed
light up.
3. The temperature can be altered by pressing the
“+” or “-” button under the corresponding LED
display.
Wash
(kg)
Water
(l)
Energy
(kWh)
Programme duration **
approx.
(hours : minutes)
SELECT SPECIAL OPTIONS The indicator lights go on.
“Prewash” button
• Only for heavily soiled laundry (for example sand
or granular dirt). Programme duration is
increased by some 15 min.
“Intensive Rinse” button
• An additional rinse cycle is carried out.
• This additional option is particularly suitable for
areas with very soft water, for washing baby
linen and helping people with detergent allergies.
“Rinse Hold” button
• The laundry remains in the last rinse water
without being spun: discoloration of the laundry
and additional creasing are prevented.
• This additional option is particularly
recommended for the programme “Synthetics”
or “Delicates”.
• This additional function is particularly useful if
you want to postpone spinning to a later time.
Note: The programme has reached the “Rinse
Hold” when the “Rinse Hold” button light flashes.
Terminate the “Rinse Hold” option:
• Press the “Rinse Hold” button again; the
programme will terminate automatically with the
appropriate spin cycle for the current
programme.
• If you do not wish to spin the clothes, turn the
programme selector knob to “Drain/Cancel”
and press the “Start/Pause” button again.
“Speed Reduction” button
• A maximum spin speed is assigned to each
programme.
• Press the button to set another speed for the
spin cycle.
• If the spin speed “0” is selected, the final spin is
cancelled. The water is only drained out.
“Easy Ironing” button
• To lessen creasing, the water quantity is
increased and the clothes are spun very gently at
reduced power. This makes your laundry
significantly damper at the end of the
programme.
“Eco+” button
• Wit h a modified temperature profile and a
slightly prolonged washing duration, the
optimum combination of excellent washing
result and even lower energy consumption can
be achieved.
PROGRAMME START
After you have selected the programme and the
additional option, the indicator light over the
“Start/Pause” button flashes. Turn on the tap and
start the programme by pressing the “Start/
Pause” button. Now the indicator light above the
button goes on.
In addition, all programme phases are indicated by
the associated lights. After the end of a programme
phase the associated indicator light goes out. Thus
the programme sequence indicator moves from left
to right across the wash, rinse and spin phases. At
the end of the programme only the “End” indicator
is still on.
DOOR LOCKED
In the first 15 minutes after the start of the “Cotton”
and “Synthetic” programmes the door can be
opened to add further laundry. This is not possible if
“Rapid Wash” is selecte.
PROGRAMME END
• The “End” indicator lights up.
1. Turn the programme selector knob to the “Off”
position.
2. Turn off the tap.
3. Open the door and unload the machine.
RESELECT AFTER PROGRAMME START
A newly-selected programme will continue in the
same programme section during which the current
programme was interrupted. Therefore do not add
any more detergent.
1. Press the “Start/Pause” button to interrupt the
programme. The indicator light flashes.
2. Select the new programme (with temperature),
any additional options and - if you wish - another
spin speed.
3. Press the “Start/Pause” button again to restart
the programme.
• If you are in the “Prewash” programme step this
additional option can not be deselected as
described (to do this see “Interrupt/Cancel
Programme).
CANCEL/DELETE PROGRAMME
1. Press the “Start/Pause” button to interrupt the
programme. The indicator light flashes.
2. Set the programme selector to “Drain/Cancel”.
The spin speed “0”.
3. Press the “Start/Pause” button to start the
“Drain/Cancel” programme.
Black process 45.0° 100.0 LPI
5019 401 05144
Loading...