Whirlpool WAC 7200/1 Product Sheet

GB PROGRAMME CHART

A. “Door open” indicator

This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B. “Service” indicator

C. “Water tap closed” indicator

D. “Clean pump” indicator

C D

}

A B

E. Programme selector

F. “Start/Pause” button

G. Programme flow bar

H. “Reset” button

Programme

Cotton

with prewash

95 °C

Cotton

30 - 40 - 60 °C

Synthetics

with prewash

60 °C

Synthetics

30 - 40 - 60 °C

Delicates

30 °C

Quick wash

30 °C

Wool

cold - 40 °C

EcoCotton

40 - 60 °C

95 °C

30 - 40 - 60 °C

60 °C

30 - 40 - 60 °C

30 °C

- 40 °C

40 - 60 °C

Care

Labels

Max. Load

- Respect the manufacturer’s recommendations on the care label

Normally to heavily soiled and robust white cotton laundry. In case of heavy soiling or stains, you can add

7.0

an oxygen-based bleach additive which can be used at 95°C. This programme eliminates bacteria, ensuring sanitization of your laundry.

7.0 Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Heavily soiled laundry made of artificial fibres (like polyester, polyacryle, viscose etc.) or their blends with

3.0 cotton.

Normally soiled garments made of artificial fibres (like polyester, polyacryle, viscose etc.) or their blends

3.0 with cotton.

1.5 Curtains and delicate clothing, dresses, skirts, shirts and blouses.

Shortly worn clothing made of cotton, polyester, polyamide and blends with cotton.

3.0 Brief programme to refresh your laundry.

1.0 Textiles made of wool, linen, viscose or silk (respect care label!) marked as hand-washable or machine-washable.

Normally soiled cotton laundry.

7.0

Most favourable programme in terms of combined water and energy consumption for washing cotton laundry. - Reference programme for the Energy Label.

Type of wash/Notes

Detergents and additives Special options

Pre-

wash

Yes Yes

—

Main wash

Yes

Softener Spin

speed

reduction

❉ ❉ ❉

Rinse

hold

Max. Spin

Speed

rpm

max.

1000

max.

1000

max.

Rinse & Spin

Spin

Short Spin

Drain

❉ = optional / Yes = dosing required.

For improved garment care, spin speed is restricted in these programmes.

—

——

7.0 Same as the last rinse and the final spin in the “Cotton” programme.

7.0 Intensive spin. Same as spin cycle in the “Cotton” programme.

1.0 Gentle spin. Same as spin cycle in the “Wool” programme.

Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”.

—— ❉ ❉ ❉

—— — ❉ —

max.

1000

—— — — — —

Whirlpool is a registered trademark of Whirlpool USA

5019 300 00222

CONSUMPTION DATA

Programme Temperature

Cotton with prewash 95 7.0 84**** 2.40 2:28

Cotton 60 7.0 54 1.19 2:20

Cotton 40 7.0 69 0.70 2:10

Synthetics with prewash 60 3.0 6.3** 1.00 1:53

Synthetics 60 3.0 50** 0.80 1:35

Synthetics 40 3.0 46 0.50 1:20

Delicates 30 1.5 60 0.50 0:46

Quick wash 30 3.0 45 0.30 0:30

Wool 40 1.0 45 0.50 0:40

Wool 20 1.0 45 0.10 0:35

EcoCotton* 60 7.0 54 1.05 4:00

EcoCotton* 60 3.5 40 0.85 3:00***

EcoCotton* 40 3.5 40 0.65 3:00

Consumption values were measured in normalized conditions, in compliance with IEC/EN 60456. In the home, they may vary depending on the individual water supply pressure and temperature, the load and the type of wash. The consumption data indicated are based on an inlet water temperature of approx. 15°C through the cold fill valve as well as the hot fill valve (if available). If your washing machine has a hot fill valve, connection of this valve to hot water supply will lower the energy consumption by reduced heating times, depending on the individual hot fill inlet water temperature. Water and energy consumptions refer to the default setting of the programmes, with temperature and load as indicated in the table; selecting any options or changing the spin speed will also change the consumption data.

The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also “Troubleshooting Guide” in your Instructions for Use).

* Reference programmes for Energy Label. For reasons of energy saving, the real water temperature may deviate from the

declared cycle temperature.

** To reduce the water temperature, some cold water is added at the end of the main wash cycle before the water is drained.

*** Automatic adaptation of programme duration after detection of wash load.

**** Cool down water and prewash water.

Power consumption in off-mode: 0.11 W Power consumption in left-on mode: 2.32 W

(°C)

LOAD LAUNDRY, ADD DETERGENT AND SELECT THE PROGRAMME

Load the laundry, close the door and add detergent as

indicated on the front page and as described in the

chapter “Detergent and Additives” in your Instructions

for Use. Turn the programme selector to the desired

programme and temperature.

The “Start/Pause” indicator blinks.

Load

(kg)

Water

(l)

Energy

(kWh)

duration

(hrs : min)

SELECT ANY DESIRED OPTION

Push the button of any option desired – the indicator

lights up.

If the combination programme/option or option/option

is not possible, the indicator switches off automatically.

“Spin speed reduction” button

• Reduces the predetermined automatic maximum

spin speed to treat your laundry more gently.

“Rinse hold” button

• The laundry remains in the last rinse water without

progressing to the final spin cycle to avoid creasing

and prevent colours from changing.

• Particularly useful if you want to postpone spinning

to a later time, or if you want to drain only.

• The programme stops to “Rinse hold” at the time the

“Rinse hold” indicator in the programme flow bar is

on. The “Start/Pause” indicator blinks.

Terminate the “Rinse hold” option :

• Press the “Start/Pause” button ; the programme

will terminate automatically with the final spin cycle

for the present wash programme.

• If you do not wish to spin the clothes, turn the

programme selector to the “Drain” programme and

press the “Start/Pause” button to start draining.

PROGRAMME START

Open the water tap and press the “Start/Pause” button

. The “Start/Pause” indicator lights up. The

programme flow bar shows the current programme phase,

running from left to right through Wash, Rinse, Spin/Drain.

“DOOR OPEN” INDICATOR

Before starting and after end of a programme, the

indicator lights to show that the door can be opened. As

long as a wash programme is running, the door remains

locked and must on no account be forced open. In case

you have an urgent need to open it during a running

programme, refer to “Reset a running programme

before the end”.

FAILURE INDICATORS

If one of the failure indicators blinks, consult the

“Troubleshooting Guide” in your Instructions for Use.

“Water tap closed”: no or not sufficient inlet water.

“Service”: failure or malfunction of an electrical

component.

“Clean pump”: waste water is not pumped out.

PROGRAMME END

• The “Door open” indicator lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the “Start/Pause” button to pause the

programme. The indicator blinks.

2. Select the new programme and, if you want, any

options.

3. Press the “Start/Pause” button again. The new

programme continues at the same position where

the previous programme was interrupted. Do not

add detergent for this programme.

RESET A RUNNING PROGRAMME BEFORE THE END

The “Reset” button cancels a programme before the

end.

• Press and hold the “Reset” button for a few

seconds. The water is drained. It may last some time

until the door can be opened.

Whirlpool is a registered trademark of Whirlpool USA

5019 300 00222