Whirlpool WAC 7200 INSTRUCTION FOR USE

Whirlpool is a registered trademark of Whirlpool USA

}

A. “Door open” indication

This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B. “Service” indication

C. “Water tap closed” indication

D. “Clean pump” indication

E. Programme selector

F. “Start/Pause” button

G. Programme sequence indicator

H. “Reset” button

30106462GB.fm Page 1 Friday, April 29, 2011 11:01 AM

GB PROGRAMME CHART

Programme

Cotton white with prewash

95 °C

Cotton

95 °C

Cotton

40 - 60 °C

Cotton rapid

60 °C

Synthetics

with prewash

60 °C

Synthetics

30 - 40 - 60 °C

Delicates

30 °C

Quick wash

30 °C

Wool

Cold - 40 °C

Handwash

40 °C

Rinse & Spin

Spin

Short Spin

Black process 45,0° 150,0 LPI

Drain

❉ = optional / Yes = dosing required.

For improved garment care, spin speed is restricted in these programmes.

95 °C

40 - 60 °C

60 °C

30 - 40 - 60 °C

30 °C

- 40 °C

40 °C

Care

Labels

—

Max. Load

7.0

7.0 Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

7.0

3.0 Heavily soiled laundry made of artificial fibres (like polyester, polyacryl, viscose etc.) or their blends with cotton. Ye s Ye s

3.0 Normally soiled garments made of artificial fibres (like polyester, polyacryl, viscose etc.) or their blends with cotton.

1.5 Curtains and delicate clothing, dresses, skirts, shirts and blouses.

4.0

1.0 This programme (40°C) is tested and approved by The Woolmark Company for machine washable wool.

1.0

7.0 Same as the last rinse and the final spin in the “Cotton” programme.

7.0 Intensive spin. Same as spin cycle in the “Cotton” programme.

1.0 Gentle spin. Same as spin cycle in the “Wool” programme.

——

Type of wash/Notes

- Respect the manufacturer’s recommendations on the care label

Heavily soiled, long-wearing and stable textiles made of cotton and linen (bed linen, table linen, underwear, towels etc.).

Normally to heavily soiled and robust white cotton laundry. In case of heavy soiling or stains, you can add an oxygenbased bleach additive which can be used at 95°C. This programme eliminates bacteria, ensuring sanitization of your laundry.

Normally to heavily soiled cotton laundry washable at 60°C. Faster alternative to “Cotton” programme for washing your cotton laundry at 60°C.

Shortly worn clothing made of cotton, polyester, polyamide and blends with cotton. Brief programme to refresh your laundry.

Textiles made of linen, silk, wool and viscose marked as “handwashable”. Care programme with a very gentle spin.

Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”.

Detergents and additives Special options

Pre-

wash

Main wash

Ye s Ye s

—

Ye s

Softener Spin

speed

reduction

❉ ❉ ❉

Rinse

hold

❉ ❉ ❉

—

Ye s

❉ ❉ ❉

❉❉❉

❉ ❉ ❉

❉❉❉

—— ❉❉❉

——— ❉ —

Max.

Spin

Speed

rpm

max.

1000

max.

1000

400

max.

1000

——— — — —

5019 301 06462

Whirlpool is a registered trademark of Whirlpool USA

30106462GB.fm Page 2 Friday, April 29, 2011 11:01 AM

CONSUMPTION DATA

Programme Temperature

Cotton 95 7.0 74 2.10 2:10 Cotton* 60 7.0 54 1.05 4:00 Cotton* 60 3.5 42 0.85 3:00 Cotton 40 7.0 69 0.80 2:45 Cotton* 40 3.5 42 0.60 2:30

Cotton rapid 60 7.0 54 1.19 2:30

Synthetics 60 3.0 46 0.80 1:35 Synthetics 40 3.0 42 0.30 1:16 Synthetics 30 3.0 42 0.30 1:16

Delicates 30 1.5 60 0.50 0:45

Quick wash 30 3.0 48 0.25 0:30

Wool 40 1.0 60 0.55 0:45 Wool 20 1.0 60 <0.10 0:40

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. Water and energy consumption data refer to the default setting of the programmes; selecting special options or modifying spin speed or temperature will change the consumption data.

The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also “Troubleshooting Guide” in your Instructions for Use).

* Reference programmes for Energy Label.

Handwash 40 1.0 45 0.55 0:40

(°C)

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use.

• Turn the programme selector to the desired programme and temperature. The indication lamp next to the “Start/Pause” button blinks.

SELECT ANY DESIRED OPTION

Push the button of any option desired - the respective indication lights up.

If the combination of programme and option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

Load

Water

(kg)

Energy

(l)

(kWh)

Approx. progr. duration

(hrs : min)

“Rinse hold” button

• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.

• Particularly useful if you want to postpone spinning to a later time, or if you want to drain only.

Note: The programme stops to “Rinse hold” at the time the “Rinse hold” light in the programme sequence indication is on. The indication lamp next to the “Start/Pause” button blinks.

Terminate the “Rinse hold” option :

• Press the “Start/Pause” button ; the programme will terminate automatically with the final spin cycle for the present wash programme.

PROGRAMME START

Open the tap and press the “Start/Pause” button

. The indication lamp next to the “Start/ Pause” button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Drain/Spin.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel a running programme before the end”.

FAILURE INDICATIONS

In case of any failures or irregularities, consult the “Troubleshooting Guide” in your Instructions for Use.

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component.

“Water tap closed”

The washing machine has no or insufficient water supply; the water tap might be closed or the water inlet hose kinked.

“Clean pump”

Waste water is not pumped out. The drain hose may be kinked or the filter must be cleaned (see “Cleaning the filter” in your Instructions for Use).

PROGRAMME END

• All the lights of the programme sequence indicator are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the “Start/Pause” button to pause the programme. The light blinks.

2. Select the new programme and, if you want, any options.

3. Press the “Start/Pause” button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

CANCEL A RUNNING PROGRAMME BEFORE THE END

The “Reset” button cancels a programme before the end.

• Press and hold the “Reset” button for a few seconds. Any existing water is drained out. It may last some time until the door can be opened.

“Spin speed reduction” button

• Reduces the predetermined automatic maximum spin speed to treat your laundry more gently.

Black process 45,0° 150,0 LPI

• If you do not wish to spin the clothes, turn the programme selector to the “Drain” programme and press the “Start/Pause” button .

5019 301 06462