Whirlpool WAB 1210, WAB 1210 SW INSTRUCTION FOR USE

GB WAB 1210 WAB 1210SW PROGRAMME CHART

A. “On/Off” button B. Programme selector C. “Start (Pause)” button D. Option buttons E. Modifiers F. “Start delay” button G. “Favourites” button H. “Reset (Drain)” button

Programme

Cotton /

(Antibacterial)

Coloured

Synthetics

Jeans

Daily

Quick wash

Outdoor

Big items

Delicates

Wool

Handwash

SuperEco

Gentle Spin

Rinse & Spin

Drain & Spin

For improved garment care, spin speed is restricted in these programmes.

In this column are indicated the most appropriate care labels, but not all which are possible to be treated with the programme.

Care

labels

— —

—

- Respect the manufacturer’s recommendations on the care label.

Normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen. At a temperature of 95°C, this programme eliminates bacteria, ensuring sanitization of your laundry.

Lightly to normally soiled bed linen, table linen, shirts, trousers etc. made of cotton and linen.

Lightly to normally soiled blouses, shirts etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Normally soiled cotton jeanswear and garments made of robust jeanslike material such as trousers and jackets.

Programme for lightly to normally soiled fabrics made of cotton and/or synthetic fibres.

Lightly soiled overalls and sports wear made of cotton, polyester, polyamide and blends with cotton.

Normally soiled and sweaty sportswear made of cotton jersey or microfibres. Use a special detergent for garments made of microfibres; Do not add any softener.

Blankets made of synthetic fibres, bedcovers filled with polyester or other artificial fibres, sleeping bags, bathmats and similar items.

Curtains and delicate dresses, skirts, shirts and blouses.

Only woollens, labelled with the Woolmark and identified as machine washable. This programme (40°C) is tested and approved by The Woolmark Company for machine washable wool.

Textiles made of silk, linen, wool and viscose marked as “handwashable”.

A very gentle spin is used in this programme.

Normally to heavily soiled and robust bed linen, table linen and underwear, towels, shirts etc. made of cotton and/or linen.

Economical energy consumption by prolonged wash duration. Ideal to be run overnight to additionally profit from the more favourable energy rates. To avoid noise of spinning at night, select “Rinse hold” option and start spinning in the morning, or define programme start with “Start delay” accordingly.

In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.

Same as the last rinse and the final spin in the “Coloured” programme.

Use this programme to drain your washer or to drain and spin your wash load.

Delicate fabrics, handwashables and woolens should be drained with no spin or low spin speed to avoid fabric stress.

Type of wash/Notes

The wool cycle of this machine has been tested and approved by The Woolmark Company for the washing of Woolmark garments labelled as “machine wash” provided that the garments are washed according to the instructions on the garment label and those issued in this programme chart. M0805

Max.

Detergent and additives Special Options and Modifiers Start

Load

Pre-

Main

wash

11.0

10.0

5.5

11.0

6.0

5.5

4.0

3.0

11.0

3.0

11.0

wash

Ye s

❉

Ye s

❉

Ye s

❉

Ye s

❉

Ye s

—

Ye s

—

Ye s

❉

Ye s

❉

Ye s

❉

Ye s

—

Ye s

—

Ye s

—

—— — — — — — — — — — ——

—— — — — — — — — — —

I/J

I. Programme sequence indicator

}

J. Detergent overdosage indication

}

Softener Rapid Easy

❉❉❉❉❉ ❉❉❉❉❉

——

❉

—

❉

———

❉

———

——

❉

—

❉

——

❉

——

❉

——

❉

———

❉

Rinse

ironing

hold

sensitive

❉❉ ❉❉❉❉❉

❉❉❉ ❉

❉❉ ❉❉

❉❉❉ ❉❉❉

❉❉ ❉

Selecting any option the indication lights up. When the combination of programme, additional options/ modifiers and temperature is not possible, the indication lights switch off automatically and a signal sounds.

: optional / Yes: dosing required.

❉

Rinse

Intensive

rinse

skin

❉❉

Pre-

Clean + Soiled

wash

—

❉

—

❉

——

—

———

—

❉

delay

Heavy

soil

—

❉

—

❉

❉❉

—

❉

—

❉

❉❉

———

❉

5019 401 15307

Max.

Te m p e -

Spin

rature

Speed

rpm

1200 20 to 95

1200 20 to 40

1000

1200 20 to 60

1200 20 to 30

1000

800

1200 20 to 60

1000

1200

°C

20 to 60

20 to 95

20 to 40

20 to 30

— —

—

➡

For any failures or irregularities, consult the “Troubleshooting Guide” in your Instructions for Use.

CONSUMPTION DATA

Programme

Cotton

Coloured Coloured 40 5.5 61 0.80 0.33 1:40

Coloured 40 1.0 30 0.41 0.25 1:05 Synthetics Synthetics 40 3.0 58 0.70 0.28 1:50

Jeans 40 11.0 125 1.08 0.56 2:05 — Daily 40 6.0 55 0.75 0.50 1:00 —

Quick wash 30 6.0 45 0.33 0.15 0:30 —

Outdoor 30 5.5 60 0.50 0.40 1:30 —

Big items 40 4.0 86 0.95 0.42 1:20 —

Delicates 30 4.0 80 0.50 0.50 0:55 —

Wool 40 3.0 69 0.78 0.78 0:45 —

Handwash 30 3.0 97 0.49 0.49 0:40 —

SuperEco 60 11.0 94 1.50 0.81 5:10 —

Consumption values were measured in normalized conditions in compliance with Standard EN 60 456. They are based on an inlet water temperature of approximately 15° C through both the cold and the hot fill valve; the energy consumption values “with hot water ” are based on an inlet water temperature of approximately 60° C through the hot fill valve. In the home the consumption data may vary as they depend on the individual water supply temperature and pressure, the load and the type of wash. - Water and energy consumption refer to the default setting of the programmes, with the temperatures indicated in the table; changing the options or modifiers setting will also change the consumption data.

The programme duration can deviate from the values in the table, because it takes into account the indivual operation conditions (see also “Troubleshooting Guide” in your Instructions for Use).

Reference programmes for Energy Label.

Automatic adaptation of programme duration after detection of wash load.

Recommended programmes for comparative tests at test institutes

Te m p e r a t u r e

ADD DETERGENT, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add the detergent as described in the programme table or in the chapter “Detergent and Additives” in your Instructions for Use.

“On/Off”

1. Press programme is on, and the

2. Turn the it is marked by a light.

3. The predefined pressing the “Temperature” and the “Spin speed” modifier.

to switch on the washer. The light of the selected

“Start (Pause)”

programme selector

temperature

and

SELECT ANY DESIRED OPTION OR MODIFIER

Selecting any option or modifier, the indication lights up. If the combination of programme, options or modifiers is not possible, the indication lights switch off automatically and a signal sounds. “Rapid” button

• Enables quicker washing by shortening the programme

duration.

• Recommendable for lightly to normally soiled laundry.

“Easy ironing” button

• Reduces creasing by increased water quantity and a very gentle spin.

“Rinse hold” button

• The laundry remains in the last rinse water without being spun:

this prevents creasing and colours from changing.

• Particularly useful if you want to postpone spinning to a later

time, or if you want to drain only.

• Do not leave the laundry to soak in the rinse hold for too long.

Load

Wat er

(°C)

(kg)

(l)

60 11.0 81 1.32 0.99 4:00 2:15 60 5.5 53 1.04 0.67 3:45 40 5.5 54 0.78 0.43 3:40 40 11.0 96 1.03 0.35 2:30 2:05

40 5.5 65 0.75 0.34 2:00 1:45

button blinks.

to the desired programme -

spin speed

can be altered by

Energy

cold water supply

(kWh)

Note:

button light blinks; the

Terminate the “Rinse hold” option:

• Press the “Rinse hold” or the

• If you do not wish to spin the clothes, press and hold the

“Spin speed” modifier

• Every programme has an automatic predefined spin speed.

• Press the button to set another spin speed.

• Spin speed “0” is only selectable for programme “Drain &

“Rinse” modifier

• “Sensitive skin”: maximum amount of rinse water is added, and

• “Intensive rinse”: more rinse water is added, and rinse cycle is

• Particularly suitable for areas with very soft water, for baby

“Options” modifier

Prewash:

➡

• Adds a prewash cycle to the programme selected.

• Use only for heavily soiled loads (e.g. sand, granular dirt).

• Increases the cycle time by approx. 15 minutes.

• Do not use liquid detergent for the main wash when activating “Prewash”.

Energy

hot water supply

(kWh)

The programme starts to “Rinse hold” when the “Rinse hold”

programme will terminate automatically with the final spin cycle for the present wash programme.

“Reset (Drain)”

drained out then, before the door can be opened.

Spin”; the final spinning is cancelled in this case - the water is drained out only at the end of the programme.

rinse cycle is prolonged.

prolonged.

clothes or to help people with skin allergies.

Approximate programme duration

(hours : minutes)

without “Rapid” with “Rapid”

** **

“Start (Pause)”

button for a few seconds. The water is

button light also blinks.

“Start (Pause)”

button ; the

Clean +

• Choose this option if you use an in-wash additive for stain removal (powder, for example “Vanish”) - it will optimize the additive’s efficiency to get better wash performance and stain removal.

• Use with maximum load.

• Add an appropriate amount of in-wash additive for stain removal (powder) to the main wash chamber, together with your detergent (only use powder detergent with this option). Respect the manufacturer’s dosing instructions.

• May prolong the programme by up to 15 minutes.

• Appropriate for use of stain removers and bleaches on oxygen

Chlorine or perborate bleaches must not be used!

basis.

Normal

“Soil level” modifier

• Adapts the programme duration to the soil level of your laundry.

Normal / Soiled / Heavy soil

SAVE YOUR FAVOURITE PROGRAMMES

If there is a programme setting which you use frequently, the washing machine offers the possibility to save one setting for each programme so that it can be used again by just pushing one button .

• Select the desired programme, temperature, spin speed and options/modifiers.

Press and hold the goes on and a signal sounds when the programme setting is saved. Next time you want to use your individual programme setting, turn the programme selector to the desired programme,

“Favourites”

If you want to replace the saved setting by another one:

• Select the programme desired and the new temperature, spin, options/modifer setting.

• Press and hold the previously saved setting is replaced by the new one.

“Favourites”

button and start by pressing

button for some seconds; the light

“Favourites”

button some seconds; the

briefly

“Start (Pause)”

push the

START DELAY

The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper.

• Select programme, temperature and options/modifiers as desired.

• Press the “Start delay” button to select a delay time up to 24 hours.

• Press and hold the countdown of the delay time begins. The light of the “Start delay” button will keep blinking until the programme starts.

• The time delay indication disappears when the programme starts and it is replaced by the remaining programme duration.

To cancel the “Start delay”:

“Start (Pause)”

• Press

- the delay time will disappear from the display.

“Start (Pause)”

, or press and hold

button ; the

“Reset (Drain)”

PROGRAMME START

Turn on the tap and press and hold the the blinking take some time until water enters into the washing machine. The programme sequence indicator on the display shows the sequence reached in the programme. After starting the programme, the indication runs from left to right through prewash,

“Start (Pause)”

button light becomes constant; it will

button -

wash, rinse, spin. When a programme sequence is finished, the corresponding symbol goes off. The display shows the remaining programme time. Due to variations in load and temperature of inlet water, the remaining time is newly calculated in certain programme phases. If this is the case, an animation appears on the display and the “6 symbol lights up.

ADD WASHING/DOOR LOCK

As soon as a programme starts, the “Door locked” symbol lights up on the display. You can interrupt the programme by pressing

- the light blinks. The “Door locked” symbol on the display goes off and you can open the door. In certain programme phases, the “Door locked” symbol remains lit to show that the door cannot be opened in the present programme phase, e.g. when the water level is too high. To continue the programme, just close the door and press

(Pause)”

again.

“Start (Pause)”

PROGRAMME END

“End” appears on the display, and a signal sounds.

1. Switch the machine off by pressing

not, the machine will switch off automatically about 5 minutes after programme end).

2. Turn off the tap and open the door to unload your washing. Leave

the door open for some time so that the washer’s inside can dry.

“On/Off”

DETERGENT OVERDOSAGE INDICATION

The symbol will light up if you used too much detergent. Use less detergent next time. If the symbol lights up and the display shows “Fod”, too much foam interrupted the wash process; refer to the “Troubleshooting Guide” in your Instructions for Use.

CHANGE THE PROGRAMME, TEMPERATURE, OPTIONS AFTER PROGRAMME START

1. Press the

2. Select the new programme, temperature and options/

3. Press and hold the

RESET A RUNNING PROGRAMME BEFORE

“Start (Pause)”

programme. The light blinks.

modifiers as desired.

new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

button to interrupt the

“Start (Pause)”

button again. The

THE END

Press and hold the the light blinks. It will take some time until the water is drained out and the door can be opened (up to 10 minutes). Caution, the washing might still be hot!

“Reset (Drain)”

button for a few seconds;

5019 401 15307

Sense”

“Start

(if you do

+ 1 hidden pages

Whirlpool WAB 1210, WAB 1210 SW INSTRUCTION FOR USE

Specifications and Main Features

Frequently Asked Questions

User Manual