Whirlpool WA 8575W, WA 8375 E INSTRUCTION FOR USE
Automatic Safety Function
G
Notes
With heavily soiled laundry the
This machine is equipped with
automatic safety functions which
detect and diagnose faults and reacts
appropriately.
(see “Troubleshooting Guide”)
Speed
Reduction
Spin Speed
Hold
Rinse
rpm
°C
Spin
Max.
Selector
Temperature
❉
—
additional “Prewash” option can be
selected as well.
20 to 95 1000
20 to 60 1000
—
5019 100 03723
Same as the spin cycle in the
“Coloured Cotton” programme.
In this programme spinning is
intensive. Same as the spin cycle in
the “Coloured Cotton” programme.
In this programme spinning is gentle.
Same as the spin cycle in the “Wool”
programme.
Drain only - no spinning. Alternative
method of terminating programme
If you select “Rinse Hold” do not
leave items to soak for too long. A
very gentle spin is used in this
In this programme, selection of
“Prewash”, “Eco” and “Intensive
Rinse” is not possible.
“Intensive Rinse” is not possible in
this programme.
If you select “Rinse Hold” do not
leave items to soak for too long.
20 to 60 1000
20 to 30 1000
20 to 40 1000
20 to 40 1000
❉❉
❉❉
❉❉
programme.
1)
400
—1000
20 to 30
1)
❉❉
❉❉
—1000
❉
—1000
❉
after “Rinse Hold”.
——
PROGRAMME GUIDE
AB
Rinse
EF
Selectable Special Options =
Eco Prewash Intensive
CD
Detergent and Additives
Max. Load
Start
Prewash
Main
Softener
Delay
Wash
kg
h
❉❉❉❉ ❉❉ ❉
yes
❉
5.5
❉❉❉❉ ❉❉ ❉
yes
❉
5.5
❉❉❉❉ ❉❉ ❉
yes
❉
2.5
—— —
❉
—
yes
❉
3.0
—
❉❉❉❉
yes
❉
1.5
—— —
❉
—
yes
❉
1.0
—— —
—— —
❉
❉
—
——
yes
❉
❉
1.0
—5.5
—— — —
—— — —
—— — — —
❉
❉
❉
———
———
———
—5.5
—1.5
——
WA 8375 E
GB
Degree of soiling
Slightly to normally soiled bed linen,
table linen and underwear, towels,
shirts etc. made of cotton and linen.
Slightly to normally soiled bed linen,
table linen and underwear, towels,
shirts etc. made of cotton and linen.
Slightly to normally soiled blouses,
shirts, overalls etc. made of polyester
(Diolen, Trevira), polyamide (Perlon,
Nylon) or blends with cotton.
Slightly soiled overalls and sports
wear made of cotton, polyester,
polyamide and blends with cotton.
Curtains and delicate clothing,
dresses skirts, shirts and blouses.
Only woollens with a felt-free finish,
labelled with the woolmark and
identified as machine washable.
Textiles made of linen, silk, wool and
viscose marked as “handwashable”.
Coton
Programme Care Label Type of fabric /
A. “Water Tap” Indication
B. “Door Free” Indication
C. “Start Delay” Button
D. Programme Sequence Indicator
E. Temperature Selection Buttons
F. “Spin Speed Reduction” Button
G. “Power On” Indication
Cotton
Coloured Cotton
Couleurs
Synthetics
Synthétiques
Programme
Chrono
Wool
Laine
Délicat
Delicates
Hand Wash
Lavage Main
—
Rinse + Spin
Rinçage + Essorage
—
—
—
Drain
Essorage Court
Vidange
1) For improved garment care spin speed is restricted to 400 rpm in this programme.
Gentle Spin
Intensive Spin
Essorage Long
GB
button lights
button.
“Start/Pause”
and the remaining time
“0”
“Start/Pause”
position.
“ ”
button. The pilot lamp of the
position.
“ ”
button again.
button to pause the programme. The light flashes.
button. The “Start Delay” light flashes until the programme starts.
” is selected, the final spinning is cancelled. The water is drained out only.
0
“Start/Pause”
button to pause the programme. The light flashes.
button again. The new programme continues at the same position where
button to start the drain programme.
“Start/Pause”
“Start/Pause”
“Start/Pause”
spin cycle for the present wash programme.
and press the
• Press the “Rinse Hold” button again; the programme will terminate automatically with the final
• If you do not wish to spin the clothes, turn the programme selector knob to the drain programme
“Spin Speed Reduction” button
• Every programme has an automatic predefined maximum spin speed.
• Press the button to set another spin speed.
• If the spin speed “
START DELAY
The “Start Delay” allows to run the machine at the consumer’s convenience, for example at night when
electricity is cheaper.
• Press the “Start Delay” button to select the delay time by 1 to 19 hours;
remaining time.
• Press the
• The time delay indication disappears when the programme starts and it’s replaced by the
• The number of hours preselected can later be reduced pressing again the “Start Delay” button.
To cancel the “Start Delay”.
• Turn the programme selector to the
• Reselect the desired programme and options and press the
PROGRAMME START
Open the tap and press the
up. The indicator lamps show the sequence reached in the programme. After starting the programme,
the sequence indication runs from left to right through Wash, Rinse, Spin. When the sequence of the
programme is finished the corresponding lamp goes out.
DOOR LOCK
During the first 15 minutes of the cotton and synthetics programmes the door can be opened for adding
further laundry.
The door can be opened when the “Door Free” indication is shining.
A short audible tone sounds three times.
PROGRAMME END
• The remaining time is on “0:00” and all the lights of the programme sequence indication are off.
1. Turn the programme selector to the
2. Turn the water supply tap off.
3. Open the door and unload the machine.
“Start/Pause”
“Start/Pause”
the previous programme was interrupted. Do not add detergent for this programme.
CHANGE THE PROGRAMME, TEMPERATURE, OPTIONS AFTER
PROGRAMME START
1. Press the
2. Select the new programme (with temperature), any options and another spin speed if you want it.
3. Press the
TO CANCEL A PROGRAMME BEFORE THE END
“Start/Pause”
shows 2 minutes.
1. Press the
2. Set the programme selector to “Drain”. The spin indicators show
3. Press the
Overview of consumption data
Programme Duration*
Energy
Water
Load
Programme Temperature
” button.
approx.
(hour : minutes)
1.60 1 : 55
(kWh)
**
(l)
(kg)
0 : 30
-
” or “
+
button is flashing.
to the desired programme.
95 5.0 44
60 5.0 39 0.95 2 : 00
40 5.0 39 0.55 1 : 45
60 2.5 55 0.70 1 : 30
40 2.5 50 0.50 1 : 15
30 3.0 35 0.40
30 1.5 50 0.50 0 : 45
40 1.0 50 0.50 0 : 40
(°C)
30 1.0 35 0.40 0 : 35
“Start/Pause”
programme selector knob
Wool
Cotton
Coloured Cotton
Coloured Cotton
Programme
Delicates
Synthetics
Synthetics
Handwash
and the pilot lamp of the
• The remaining time display shows the duration of the chosen programme (in hours and minutes)
selected programme lights up.
2. The programme sequence and the predefined spin speed indication corresponding to the
3. The recommended temperature (see the indicator) can be altered by pressing “
PRESS ANY DESIRED OPTION BUTTON(S). The pilot lamp lights up.
An audible tone sounds if the combination of programme, additional options and temperature
is not possible. Unsuitable combinations of options are deselected automatically.
the household conditions applicable at that time.
pump drains the water out.
Prewash cycle increases programme duration by approximately 15 min. Consumption values were measured in
normalized conditions in compliance with Standard IEC 60 456. The data on the “Energy Label” refer to programme
“Coloured Cotton 60°C”. Consumption data in the home may vary with respect to the values in the table in relation to
the water supply pressure and temperature, the load and the type of wash.
* The remaining time indicator can similarly deviate from the values in the table, because it takes into account
** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the
ADD DETERGENT, CLOSE THE DOOR AND SELECT THE PROGRAMME
Add the detergent as described in the chapter “Detergent and Additives” in the booklet.
1. Turn the
“Eco Wash” button
maintaining good washing results.
• The duration of the wash is extended and the temperature reduced to save up to 40% of energy
“Prewash” button
by approximately 15 min.
• Only for heavily soiled loads (for example sand, granular dirt) sensible. The cycle time increases
“Intensive Rinse” button
people with allergies.
creasing and prevent colours from changing.
• A further rinse cycle is added.
• This option is particularly suitable for areas with very soft water washing baby linen and helps
“Rinse Hold” button
• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid
The programme stops to “Rinse Hold” at the time the “Rinse Hold” button light flashes.
• This option is particularly recommended for the programme “Synthetics” or “Delicates”.
• This function is particularly useful if you want to postpone spinning to a later time.
Note:
Terminate the “Rinse Hold” option:
Loading...