WHIRLPOOL W9 931D KS Daily Reference Guide
Quick guide
2
4
5
10
3
EN
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT
In order to receive a more complete assistance, please
register your product on www . whirlpool . eu/ register
FIRST TIME USE
After installation, wait at least two hours before connecting the
appliance to the power supply. Once connected, it will start working
automatically. The ideal temperature settings are preset from the
factory.
CONTROL PANEL
1
ON/STAND-BY
To put the product in Stand-by, press and hold the On/ Stand By
button for 3 seconds. All the indicators turn o except On/Standby
indicator. Press again to reactivate the appliance.
FRIDGE TEMPERATURE
To adjust the Fridge Temperature, press the Fridge Temperature
button. The Fridge Temperature can be adjusted between +2°C and +
8°C, as shown by the Fridge and freezer temperature display.
FREEZER TEMPERATURE
To adjust the Freezer Temperature, press the Freezer °C button. The
Freezer Temperature can be adjusted between -16°C and -24°C, as
shown by the FRIDGE TEMPERATURE button/Fast Cool button.
Recommended setting:
• Refrigerator compartment: +4°C or MED
• Freezer compartment: -18°C or -20°C
Note: Displayed set points correspond to the average temperature
throughout the whole refrigerator.
FAST COOL
Using Fast Cool function it is possible to increase the cooling
capacity in the refrigerator compartment. The use of this function
is recommended when placing a very high quantity of food in the
refrigerator compartment. Press the FRIDGE TEMPERATURE button/
Fast Cool button to activate Fast Cool function. When activated, the
Fast Cool indicator turns on. The function is automatically disabled
after 6 hours, or can be manually disabled by pressing FRIDGE
TEMPERATURE button/Fast Cool button again.
FAST FR EEZE
The use of this function is recommended when placing a very high
quantity of food to be frozen in the freezer compartment.
24 hours before freezing fresh food, press the FREEZER TEMPERATURE
button / Fast Freeze button to activate the Fast Freeze function. When
activated, the Fast Freeze indicator turns on. After 24 hours place the
food to be frozen in the middle freezing zone of freezer compartment.
The function is automatically disabled after 48 hours, or can be
manually disabled by pressing FREEZER TEMPERATURE button / Fast
Freeze button.
* Available only on certain models
6
7
8
9
Before using the appliance carefully read the Safety
Instruction.
After turning the appliance on, wait 4-6 hours for it to reach the correct
food storage temperature.
1. Black out alarm indicator
2. Fast cool indicator
3. Fridge and freezer temperature display
4. Fast freeze indicator
5. Vacation mode indicator
6. On/Stand By button
7. Stop alarm button
8. Fridge temperature button / fast cool button
9. Freezer temperature button / fast freeze button
10. Precision control button / vacation mode button
PRECISION CONTROL FUNCTION
Precision control function is an advanced technology that reduces
temperature uctuations in the whole freezer compartment to
minimum, thanks to an innovative air system, totally independent from
the fridge. Freeze burns are reduced up to 60% and food preserves its
original quality and color. To activate/deactivate the precision control
function simply press the precision control function button. The
function works properly in a dened range of temperature: between
-22°C and - 24°C.
When the function is engaged and the current temperature in the
freezer is set to the warmer set point than -22°C, the temperature is
automatically set to -22°C to match the working range. If the function
is engaged and the user modify the freezer temperature out of the
working range, the function is automatically switched o. In case of
Fast freezing is engaged, the function “Precision control function” is
inhibited until the Fast Freezing function switched o.
VACATION MODE
This function can be activated to reduce the energy consumption
of the appliance during a prolonged period of time. To activate the
Vacation, press for 3 seconds the Precision Control button. When the
function is enabled, the related symbol will light up and the fridge
display will show 12°C. To deactivate this function repeat the same
procedure. Changing the refrigerator temperature setpoint will
automatically deactivate the function. When this function is engaged,
the freezer compartment works normally.
SMART DISPLAY *
This optional function can be used to save energy. To activate the
Smart Display, press simultaneously FRIDGE temperature button and
FREEZER temperature button. When activated, other buttons and the
displays are switched o to minimize the consumption. To deactivate
this function repeat the same procedure. Remember that this function
does not disconnect the appliance from the power supply, but only
reduce the power consumed by external display Every time you want
to use the control panel and see all the functions, you just need to
touch any button to wake up the panel.
LED LIGHT
This product contains a light source of energy eciency class G.
If the LED light system does not work, please contact the Service to
replace it.
Important: The refrigerator compartment light switches on when the
refrigerator door is opened. If the door is kept open for more than
8 minutes the light will be automatically switched o.
HOW TO STORE FRESH FOOD AND BEVERAGES
REFRIGERATION COMPARTMENT
Refrigerator compartment defrosting is completely automatic.
Droplets of water on the rear wall inside the refrigerator compartment
indicate that the automatic defrost phase is in progress.
The defrost water is automatically run into a drain hole and collected in
a container, where it evaporates.
Fan*
The Fan improves temperature distribution inside the refrigerator
compartment, allowing better preservation of stored food.
The fan will start/stop working depending on the temperature and/
or humidity level inside the fridge. If the appliance has the Fan it can
be equipped with the antibacterial lter. If the appliance has the Fan it
can be equipped with the antibacterial lter. Visit the website page or
contact consumer service to purchase the lter.
Legend
TEMPERATE ZONE
Suggested for storage of tropical fruit, cans, drinks,
eggs, sauces, pickles, butter, jam
COOL ZONE
Suggested for the storage of cheese, milk, daily food,
delicatessen, yogurt
COOLEST AREA
Suggested for storage of meat and sh
FRUIT & VEGETABLE DRAWER
FREEZER DRAWERS
(One drawer in models lower than 1,7m)
FREEZING ZONE DRAWER
(Max cool zone)
Suggested to freeze fresh / cooked food
Fresh box 0°
The Fresh Box 0° compartment is ideal to store meat and sh. By
decreasing/increasing the fridge temperature, you impact the Fresh
Zone 0° compartment temperature as well. Keep in mind that the Fresh
Zone 0° compartment is a mechanical feature operating all the time
and it cannot be switched o.
If the declaration for the "chiller/chill" drawer is on the rating plate, the
declaration applies only to standard EN 62552:2013, valid until February
28th, 2021.
FREEZER COMPARTMENT
No Frost freezers provide chilled air circulation around the storage
areas, and prevent the formation of ice, thereby completely eliminating
the need for defrosting.
Frozen items don’t stick to the walls, labeling stays legible and storage
space remains neat and clear.
The freezer compartment allows for the storage of frozen food and the
freezing of fresh food. The quantity of fresh food that can be frozen
in a specic time period is indicated on the rating plate. Arrange the
fresh food in the freezing area inside the freezer compartment, leaving
enough space around it to allow air to circulate freely. Avoid allowing
fresh food to come into direct contact with frozen food.
* Available only on certain models
Load limits are determined by baskets, aps, drawers, shelves etc..
Make sure that these components can still close easily after loading.
The freezing zone's drawer/compartment is shown in the picture
above. To optimize freezing speed and get more storage space, the
freezer compartment can be used without the freezer drawers and
the food can be placed directly on the bottom of the compartment.
To avoid food waste, please refer to the recommended setting and
storage found in the online user manual.
Ice cubes
Fill 2/3 of the ice tray with water and place it back in the freezer
compartment. Do not use sharp or pointed objects to remove the ice.
Loading...