Whirlpool W4TXNWFWQ User Manual
2218469
Top-Mount Refrigerator
Table of Contents ........2
2
A NOTE TO YOU
Thank you for buying a WHIRLPOOL®appliance.
Because your life is getting busier and more complicated,
Whirlpool appliances are easy to use, save time, and help
you manage your home better. To ensure that you enjoy
years of trouble-free operation, we developed this Use
and Care Guide. It is full of valuable information about
how to operate and maintain your appliance properly and
safely. Please read it carefully.
Look for these tips
Look for these Time Smart Tips located throughout the Use & Care Guide. They will help you save
time and make the most of your new appliance.
TABLE OF CONTENTS
Page
A Note to You ..................................................................2
Refrigerator Safety ........................................................3
Parts and Features ........................................................4
Installing Your Refrigerator ............................................6
Using Your Refrigerator ................................................9
Setting the controls ......................................................9
Changing the control settings ....................................10
Ensuring proper air circulation....................................10
Removing the snap-on door trim................................11
Removing the drop-in door trim..................................11
Adjusting the door bins ..............................................11
Adjusting the refrigerator shelves ..............................12
Adjusting the utility compartment and tray ................13
Using the flip-up door shelf ........................................13
Removing the meat drawer and cover ......................14
Adjusting the EZ-TRAK refrigerator shelf ..................15
Removing the crisper and crisper cover ....................16
Adjusting the crisper humidity control ........................17
Adjusting the freezer shelf ..........................................17
Removing the pull-out freezer floor............................18
Using the optional automatic ice maker ....................18
Removing the base grille ............................................19
Changing the light bulbs ............................................19
Reversing the door swing ..........................................20
Saving energy ............................................................22
Understanding the sounds you may hear ..................22
Caring for Your Refrigerator ........................................23
Food Storage Guide ....................................................25
Troubleshooting Guide ................................................27
Requesting Assistance or Service ..............................32
Index ..............................................................................33
Record your model’s information
Write down the following information about your refrigerator to better help you obtain assistance or service if you
ever need it. You will need to know your complete model
number and serial number. You can find this information
on the model and serial number label/plate.
If you need assistance or service, first see the
“Troubleshooting” section of this book. After checking
“Troubleshooting,” additional help can be found by
checking the “Requesting Assistance or Service” section.
Dealer name________________________________________
Address ____________________________________________
Phone number______________________________________
Model number ______________________________________
Serial number ______________________________________
Purchase date ______________________________________
(See the “Parts and Features” section for model and
serial number label/plate location.)
Keep this book and your sales slip together for
future reference.
3
PROPER DISPOSAL
OF YOUR OLD
REFRIGERATOR
wWARNING
Suffocation Hazard
Remove doors from your old refrigerator.
Failure to do so can result in death or
brain damage.
IMPORTANT: Child entrapment and suffocation are not
problems of the past. Junked or abandoned refrigerators
are still dangerous ... even if they will sit for “just a few
days.” If you are getting rid of your old refrigerator, please
follow the instructions below to help prevent accidents.
BEFORE YOU THROW AWAY YOUR OLD
REFRIGERATOR OR FREEZER:
•
Take off the doors.
•
Leave the shelves in place so that children may not
easily climb inside.
REFRIGERATOR SAFETY
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire,
electric shock, or injury when using your
refrigerator, follow these basic precautions:
•
Plug into grounded (earthed) outlet.
•
Do not remove ground prong.
•
Do not use an adapter.
•
Do not use an extension cord.
•
Disconnect power before servicing.
•
Remove doors from your old refrigerator.
•
Use nonflammable cleaner only.
•
Keep flammable materials and vapors, such as
gasoline, away from refrigerator.
•
Use two or more people to move or install
refrigerator.
•
Unplug refrigerator before installing ice maker.
•
Use a sturdy glass when dispensing ice or water
(on some models).
– SAVE THESE INSTRUCTIONS –
All safety messages will tell you what the potential
hazard is, tell you how to reduce the chance of injury,
and tell you what can happen if the instructions are
not followed.
Your safety and the safety of others
are very important.
We have provided many important safety messages in
this manual and on your appliance. Always read and
obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards
that can kill or hurt you and others.
All safety messages will follow the safety
alert symbol and either the word
“DANGER” or “WARNING.” These
words mean:
You can be killed or seriously injured if you don't
immediately follow instructions.
You can be killed or seriously injured if you don't
follow instructions.
4
PARTS AND FEATURES
This section contains an illustration of your refrigerator. Use it to become more familiar with the parts
and features. Page references are included for your convenience.
NOTE: This manual covers several different models. The refrigerator you have purchased may have
some or all of the parts and features listed below.
Freezer shelf
†
(p. 17)
Control panel
(p. 9)
Model
and serial
number label
(on side wall)
Meat drawer
†
(p. 14)
Crisper cover
†
(p. 16)
Crispers
†
(p. 15)
Leveling
rollers
(behind
base grille)
(p. 8)
Snap-on
door trim
(p. 11)
Utility
compartment
†
(p. 13)
Flip-up shelf
†
(p. 13)
Adjustable
glass or wire
shelves
(p. 12)
Adjustable
door bins
††
(p. 11)
Base grille
(p. 19)
Drop-in
door trim
(p. 11)
Other parts and features
(not shown in illustration above/optional on some models)
Automatic ice maker (p. 18)
Ice cube trays/ice cube tray shelf
Pull-out freezer floor (p. 18)
Crisper humidity control (p. 17)
Egg/utility bin
EZ-TRAK lateral adjustable refrigerator shelf (p. 15)
†
on some models
††
some models may have fixed door shelves
5
PARTS AND FEATURES
This section contains an illustration of your refrigerator. Use it to become more familiar with the parts
and features. Page references are included for your convenience.
NOTE: This manual covers several different models. The refrigerator you have purchased may have
some or all of the parts and features listed below.
Automatic
ice maker
(p. 18)
Ice bin
Temperature
control
(p. 9)
Model and serial
number label
(on side wall)
Meat drawer
†
(p. 14)
Adjustable
wire shelves
(p. 20)
Plastic crisper
cover
(p. 16)
Leveling rollers
(not shown)
(p. 8)
Door shelves
Magnetic
door gaskets
Light switch
Dairy
compartment
Meat drawer
cover
(solid plastic)
(p. 14)
Door shelves
Crisper drawers
(p. 16)
Adjustable freezer shelf
(partial shelf on some models)
(p. 17)
Other parts and features
(not shown in illustration above/optional on some models)
Ice cube trays
Full-width crisper drawer
Glass crisper cover
†
on some models
6
INSTALLING YOUR REFRIGERATOR
It is important to prepare your refrigerator for
use. This section tells you how to clean it, install
it, connect it to a power source, and level it.
UNPACKING YOUR REFRIGERATOR
Removing packaging materials
•
Remove tape and any labels from your refrigerator
before using (except the model and serial number
label).
To remove any remaining tape or glue, rub the area
briskly with your thumb. Tape or glue residue can also
be easily removed by rubbing a small amount of liquid
dish soap over the adhesive with your fingers. Wipe
with warm water and dry.
•
Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or
glue. These products can damage the surface of your
refrigerator. For more information, see “Important
Safety Instructions” in the “Refrigerator Safety” section.
•
On some models, shelves, bins, door shelf rails, and
other feature parts may be packaged in the Finishing
Touches FeaturePak. Follow the instructions contained
in the package for proper assembly.
IMPORTANT:
•
Do not remove any permanent instruction labels inside
your refrigerator, or the Tech Sheet that is fastened to
the base grille.
•
Do not remove the white Styrofoam insert that is located behind the control panel on the ceiling of the refrigerator. The insert is part of the refrigerator and not part
of the packing material. When the insert is removed,
ice may migrate down from the freezer and cause
icicles to form.
Cleaning before use
After you remove all of the packaging materials, clean
the inside of your refrigerator before using it. See the
cleaning instructions in the “Caring For Your Refrigerator”
section for more information.
wWARNING
Excessive Weight Hazard
Use two or more people to move refrigerator.
Failure to do so can result in back or other injury.
1
⁄2inch minimum
at top and sides
SPACE REQUIREMENTS
•
To ensure proper ventilation for your refrigerator, allow
for a 1⁄2-inch (1.25 cm) space on each side and at the
top.
•
If your refrigerator has an ice maker, make sure you
leave some extra space at the back to allow for the
water line connections. The refrigerator can be flush
against the back wall if you do not have an ice maker
installed.
•
If you are installing your refrigerator next to a fixed wall,
leave 2 inches minimum on the hinge side (depending
on your model) to allow for the door to swing open.
wWARNING
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from refrigerator.
Failure to do so can result in death, explosion,
fire, or burns.
7
ATTACHING THE OPTIONAL ICE
MAKER TO A WATER SUPPLY
Read all directions carefully before you begin.
IMPORTANT:
•
Use copper tubing only and check for leaks.
•
Install ice maker tubing in areas where temperatures
are above freezing.
•
Contact your dealer or authorized Whirlpool service
company for proper installation and parts.
Cold water supply
The ice maker water valve contains a flow washer which
is used as a water pressure regulator. The ice maker
needs to be connected to a cold water line with water
pressure limitations of 20-120 psi. If a problem occurs,
call your utility company.
IMPORTANT:
•
It may take up to 24 hours for your ice maker to begin
producing ice.
•
If operating the refrigerator before installing the water
connection, turn ice maker to the OFF position to prevent operation without water.
•
All installations must be in accordance with local
plumbing code requirements.
Installation is not warranted by
refrigerator or ice maker manufacturer.
ELECTRICAL REQUIREMENTS
Before you move your refrigerator into its final location, it
is important to make sure you have the proper electrical
connection.
Recommended Grounding Method
A 115 Volt/60 Hz (Plug 1), 220/240 Volt/50 Hz (Plug 2),
220 Volt/60 Hz (Plug 3) AC only 10 ampere fused and
properly grounded electrical supply is required. It is recommended that a separate circuit serving only this appliance be provided. Use a receptacle which cannot be
turned off with a switch or pull chain. Do not use an
extension cord.
NOTE: Before performing any type of installation, cleaning, or removing a light bulb, turn the Refrigerator Control
to OFF and then disconnect the refrigerator from the
electrical source. When you are finished, connect the refrigerator to the electrical source and reset the Refrigerator Control to the desired setting.
Plug 1 Plug 2
Plug 3
wWARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions
can result in death, fire, or
electrical shock.
8
LEVELING AND DOOR ALIGNMENT
If the refrigerator is not leveled during installation, the
doors may not close or seal properly, causing cooling,
frost, or moisture problems. It is very important for the
refrigerator to be level in order to function properly.
Move the refrigerator into its final position. Use a level on
top of the refrigerator to check that it is level from sideto-side. Next, open both doors completely and release
them. The doors should close on their own. If the doors
do not close automatically or the refrigerator is not level
side-to-side, adjust the refrigerator's tilt using the
instructions below.
1. Roll out the refrigerator and use a level to check the
floor at the back from side-to-side. If needed, use
shims to level the back of the refrigerator if it is
uneven. Roll the refrigerator back into place with the
rear rollers on top of any shim(s) used so that the rear
of the refrigerator is level.
2. With the rear already level and the refrigerator in place,
use the front leveling screws to level the refrigerator
from side-to-side. Open the refrigerator door and
remove the base grille to find the two leveling screws.
They are part of the front roller assemblies which are
found at the base of the refrigerator on either side.
3. To level your refrigerator, you may either turn the
screw clockwise to raise that side of the refrigerator
or turn the screw counterclockwise to lower that side.
Place a level on top of the refrigerator to check adjustments. Use a screwdriver to adjust the leveling screw.
NOTE: Having someone push against the top of the
refrigerator takes some weight off the leveling screws
and rollers. This makes it easier to adjust the screws.
4. If the doors do not close on their own, you will need to
raise the front of the refrigerator so it is slightly higher
than the back. To do this, turn both leveling screws
clockwise 1⁄2turn.
IMPORTANT: Be sure to turn both screws an equal
amount or the refrigerator will no longer be level
side-to-side.
5. Open doors and check if they close automatically. If
not, repeat steps 3 and 4.
6. Using a level, check to see if the refrigerator is still
level side-to-side. Readjust if necessary.
7. Reinstall the base grille.
Right to raise; left to lower
Use a screwdriver to adjust
Leveling screw
Raise
Front Roller
Lower
9
USING YOUR REFRIGERATOR
To obtain the best possible results from your refrigerator, it is important that you operate it properly.
This section tells you how to set the controls, remove and adjust the features in your refrigerator, and
how to save energy.
SETTING THE CONTROLS
Style 1
Controls for the refrigerator and freezer are located in the
top of the refrigerator section. When you first install
your refrigerator, set the Refrigerator Control at 3 and
the Freezer Control at 3.
Style 2
Controls for the refrigerator and freezer are located in the
top of the refrigerator section. When you first install
your refrigerator, set the Temperature Control to 3
(normal). Temperature Control adjustments range from 1
(warmest) to 5 (coldest).
NOTES:
• The built-in exterior moisture control continously
guards against moisture build-up on the outside of
the refrigerator cabinet.
• Turning the Refrigerator Control (Style 1) or
Temperature Control (Style 2) to OFF stops cooling in
both the refrigerator and the freezer compartments,
but does not disconnect the refrigerator from the
......power supply.
IMPORTANT: Give the refrigerator time to cool down
completely before adding food. This could take several
hours. If you add food before the refrigerator has cooled
completely your food may spoil. Turning the control(s) to
a higher than recommended setting will not cool the
compartment(s) any faster. The control settings indicated
in “Changing the Control Settings” section should be
correct for normal household refrigerator usage. The
control is set correctly when milk or juice is as cold as
you like and when ice cream is firm.
To set the Refrigerator Control to OFF, turn one setting
past warmer until the word OFF appears. Your appliance
will not cool when the Refrigerator Control is set to OFF.
The Freezer Control functions as an airflow director.
Setting “1” will direct more of the cold air into the refrigerator section, while setting “5” will direct more cold air
into the freezer section. The cold air travels from the
freezer compartment through the top vent, into your
refrigerator section (see diagram in “Ensuring proper air
circulation” section).
normal
coldestoff
1
3
5
WARMER
1
2
REFRIGERATOR
3
RECOMMENDED SETTINGRECOMMENDED SETTING
4
5
COLDER
WARMER
1
0
2
O
REFRIGERATOR
3
F
RECOMMENDED SETTINGRECOMMENDED SETTING
4
F
5
COLDER
WARMER
1
1
2
2
FREEZER
COLDER
3
4
4
5
5
RECOMMENDED SETTINGRECOMMENDED SETTING
10
Condition/
Reason:
Refrigerator section
too warm
•
Door opened often
•
Large amount of food added
•
Room temperature too warm
Freezer section too warm/ice
not made fast enough
•
Door opened often
•
Large amount of food added
•
Very cold room temperature
(can’t cycle often enough)
•
Heavy ice usage
Refrigerator section
too cold
•
Controls not set correctly
for your conditions
Turn refrigerator
Control to next
higher number
Turn freezer
Control to next
higher number
RECOMMENDED
ADJUSTMENT:
Turn refrigerator
Control to next
lower number
CHANGING THE CONTROL
SETTINGS
If you need to adjust temperatures in the refrigerator or
freezer, use the settings listed in the chart below as a
guide. Wait at least 24 hours between adjustments.
ENSURING PROPER AIR CIRCULATION
In order to ensure proper temperatures, you need to
permit air flow between the two sections. As shown in
the illustration, cool air enters through the bottom of the
freezer section (A) and moves up. Most of the air then
flows through the freezer section vents (B) and
recirculates under the freezer floor (C). The rest of the air
enters the fresh section through the top vent (D).
Do not block any of these vents
(A, B, C, or D) with food packages. If the vents are
blocked, air flow will be prevented and temperature and
moisture problems may occur.
IMPORTANT: Because air circulates between both
sections, any odors formed in one section will transfer to
the other. You must thoroughly clean both sections to
eliminate odors. To prevent odor transfer and drying out
of food, wrap or cover foods tightly. (See the “Food
Storage Guide” section for details.)
B
A
A
D
C
Loading...