TRKE 6960/2
5019 407 00421
W
Very
Wet
Load
Wet
Load
Load
Kg
Fabric
programmes
& Drying
levels
Drying options
Buzzer & Anti-Crease
cannot be selected
together
Gentle
Reduces drying
intensity
(recommended
for delicate items)
Dryness
Adjustment
(Adjusts Dryness
Level according
to wishes)
Buzzer
Signals/
Sounds end of
drying cycle
at Intervals
Anti-Crease
Prevents
laundry
from
creasing
Start Delay
Delays the
drying cycle
start
Indicative
drying
times (in
minutes)
95’
160’
80’
130’
3.0
6.0
Cotton
max 6 kg
Ready to wear
80’
130’
60’
110’
3.0
6.0
Cupboard dry *
60’
110’
50’
85’
3.0
6.0
Iron dry *
25’
45’
20’
35’
1.0
2.5
Mixed Fabrics
max 2.5 kg
Cupboard dry *
20’
35’
15’
25’
1.0
2.5
Iron dry
100’ 85’ 2.5
ExtraCare
max 2.5 kg
Low drying intensity
for delicates and
garments labled
.
--
---
Airing
Laundry is aired and
refreshed for 30 minutes
without heating.
--
---
Completes drying or dries
single items (suitable for
all fabrics).
--
TRKE 6960GB
QUICK REFERENCE GUIDE
Please also carefully read the
“Instructions for Use”.
Cotton
Mixed Fabrics
Extra Care
Airing
Time
* Test programmes according IEC 61121
Start
Pause
Starts the drying cycle. The Start/
Pause indicator lamp is blinking
during the selection phase.
Press to confirm the final selection.
Programme
selection
Turn the programme selector knob to
the desired programme. The indicator
next to the programme name lights up.
The start indicator blinks to show, that
the dryer is in selection mode. After
the Start / Pause button is pressed the
start indicator lamp lights up and the
programme starts.
Start delay
Delays the drying cycle start from
1 up to 12 hours.
To select the start delay turn the
programme selector knob to the desired
programme, select the desired options
and press the start delay button. With
each touch of the start delay button,
drying cycle start is delayed by one hour.
Press the Start/Pause button to confirm
your final selection. Start delay indicator
blinks and the count-down is running by
reducing the time in one hour steps. The
count-down is indicated by the blinking
of the start-delay indicator located
above the button. During count-down
the drum will turn from time to time to
redistribute the laundry and the pu mp
may be heard working for a short time.
To cancel or to change the previously
set time turn programme selector knob
to “0” or open the door.
Remaining time
indication
After cycle start a default drying time is
indicated depending on the selected
drying programme and the dryness
adjustment. After 15 seconds the time
will be adjusted to the real expected
remaining time, depending on size,
type and humidity of the load.
Dryness
Adjustment
Dryness adjustment is an option to adjust
the dryness of the laundry according to
your wishes. Select the desired
programme and the option dryness level
adjustment by pressing the button “
+
“
for more dry or the button “
–
“ for more
humid. The selected dryness will be
stored as a pre-setting to the selected
drying programme. Using the drying
programme next time the pre-setting
appears. By pressing the dryness
adjustment buttons “
+
” or “
–
” the pre-
setting can be changed.
Filter
The indicator lamp lights up when the
filter needs cleaning.
Clean the filter
at the end of every cycle.
Water
Container
Lights up when water container needs
to be emptied. The drying cycle is
automatically interrupted.
Empty the
water container.
Press the Start/Pause
button to restart the dryer and to
continue the programme.
PROGRAMME SEQUENCE INDICATION
The programme sequence is indicated by lamps,
switching on when programme step starts and
switching off when the programme step is passed.
Loading...