Whirlpool TRAK 6450/1, TRAK 6450/2 INSTRUCTION FOR USE

GB TRAK 6450

QUICK REFERENCE GUIDE

Please also carefully read the “Instructions for Use”.

Very

Wet

Load

Drying options

Buzzer & Anti-Crease

Wet

Load

cannot be selected

Load

Kg

together

Indicative

Dryness

drying

Gentle

Buzzer

Anti-Crease

Start Delay

times

Fabric Drying

Reduces drying

Adjustment

Signals/

Prevents

Delays the

intensity

(Adjusts

Sounds end

laundry

drying

(in minutes)

Cycles

(recommended

Dryness Level

of drying

from

cycle start

& Drying

for delicate

according to

cycle at

creasing

levels

items)

wishes)

Intervals

85’

70’

3.0

Cupboard dry +

120’

100’

5.0

Cotton

Cotton

65’

50’

3.0

Cupboard dry *

90’

75’

5.0

max 5 kg

55’

40’

3.0

Iron dry *

75’

65’

5.0

Synthetics

20’

15’

1.0

max 2.5 kg

Cupboard dry *

-

30’

25’

2.5

35’

30’

2.5

Synthetics

-

15’

10’

1.0

Iron dry

Delicate

Delicate

-

-

-

30’

20’

1.5

max 1.5 kg

Especially for delicate items

(e.g. shirts)..

Airing

-

-

-

Airing

Laundry is aired and refreshed

-

-

for 30 minutes without heating.

Time

-

-

-

Completes drying or dries

-

-

fabrics).

single items (suitable for all

Start			Starts the drying cycle. The Start/Pause
Pause			indicator lamp is blinking during the
			selection phase.
			Press to confirm the final selection.
Programme			Turn the programme selector knob to
			the desired programme. The indicator
selection			next to the programme name lights up.
			The start indicator blinks to show, that
			the dryer is in selection mode. After
			the Start / Pause button is pressed the
			start indicator lamp lights up and the
			programme starts.
			Delays the drying cycle start from
			1 up to 12 hours.
			To select the start delay turn the
			programme selector knob to the desired
			programme, select the desired options
			and press the start delay button. With
			each touch of the start delay button,
			drying cycle start is delayed by one hour.
			Press the Start/Pause button to confirm
			your final selection. Start delay indicator
			blinks and the count-down is running by
Start delay			reducing the time in one hour steps. The
			count-down is indicated by the blinking
			of the start-delay indicator located
			above the button. During count-down
			the drum will turn from time to time to
			redistribute the laundry. The pump may
			be heard working for a short time.
			To cancel or to change the previously
			set time turn programme selector knob
			to “0” or open the door.
Remaining time			After cycle start a default drying time is
indication			indicated depending on the selected
			drying programme and the dryness
			adjustment. After several minutes the
			time will be adjusted to the real expected
			remaining time, depending on size, type
			and humidity of the load.
			Dryness adjustment is an option to
			adjust the dryness of the laundry
Dryness			according to your wishes. Select the
			desired programme and the option
Adjustment			dryness level adjustment by pressing
			the button “+“ for more dry or the
			button “–“ for more humid. The
			selected dryness will be stored as a pre-
			setting to the selected drying
			programme. Using the drying
			programme next time the pre-setting
			appears. By pressing the dryness
			adjustment buttons ‘+’ or ‘–‘ the pre-
			setting can be changed.
Filter			The indicator lamp lights up when the
			filter needs cleaning. Clean the filter
			at the end of every cycle.

PROGRAMME SEQUENCE INDICATION

The programme sequence is indicated by lamps, switching on when programme step starts and and switching off when the programme step is passed.

* Test programmes according IEC 61121.

5019 407 00163