Whirlpool TLS 86-1 INSTRUCTION FOR USE

A. Programme selector B. “Start delay” button C. Programme sequence indicator

Start delay indicator D. “Spin” button E. “Start(Pause)” button F. “Reset” button G. “Door open” indication

PROGRAMME CHART

intensivo

Pre-

lavaggio

Lavaggio

1h. 3h. 6h. 9h. 12h.

Scarico

Centrifuga

Risciacquo &

Centrifuga

40°

Eco

Cotone

60°

20°

Lana/ A mano

40°

Rapido 15’

40°

Misti

Avvio

ritardato

Pre-

lavaggio

Ingresso acqua

800

Pulizia filtro

700

600

Risciacquo

400

Quick

Centrifuga

time

Anti piega

Risciacquo

Anti piega

95°

30°

60°

40°

Centrifuga

/ Scarico

Cotone

40°

60°

40°

30°

Delicati

SuperEco

Sintetici

Apertura porta

Service

Annulla

Avvio

(pausa)

This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react

appropriately: H. “Service” indication

I. “Water tap closed” indication J. “Clean pump” indication

Do not use liquid detergent for main wash if you

have activated prewash option.

Do not use liquid detergent.

Programme

Care

Labels

Max. Load

- for temperature selection, respect the manufacturer's recommendations on the care label

Type of wash / Notes

Detergents and Additives Special options Max.

Pre-

wash

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made

Cotton

40 - 60 - 95 °C

Cotone

40 - 60 - 95°C

of cotton and linen.For washing heavily soiled laundry, the “Prewash” option can be selected.

6.0

Selecting “Cotton 95”, this programme eleiminates bacteria, ensuring sanitization of your laundry. The bacteria removal efficiency has been tested following a similar methodology to

the NF EN 13697 standard of Nov. 2001.

Heavily soiled and robust laundry made of cotton, synthetics and their blends. Economical

SuperEco

60 °C

SuperEco

60°C

energy consumption by prolonged wash duration - ideal to be run overnight to profit from more

6.0

favourable energy rates. Avoid noise of spinning at night by setting the spin speed to “0” and start spin programme in the morning, or by defining programme start with “Start delay” accordingly. -

– Yes

For garments with a high share of synthetic fibres, we recommend to use a laundry net.

Synthetics

30 - 40 - 60 °C

Delicates

30 - 40 °C

Daily load

40 °C

Speed 15´

30 °C

Wool/Handwash

20 - 40 °C

Eco Cotton

40 - 60 °C

Rinse & Spin

Sintetici

30 - 40 - 60°C

Delicati

30 - 40°C

Misti

40°C

Rapido 15´

30°C

Lana/Amano

20 - 40°C

Eco Cotone

40 - 60°C

Risciacquo &

Centrifuga

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira),

3.0 polyamide (Perlon, Nylon).

1.5 Curtains and delicate clothing, dresses, skirts, shirts and blouses.

3.0 Slightly to normally soiled textiles made of cotton and/or synthetics. – Yes

Refreshed briefly worn outer clothing made of cotton, artificial fibers and blends with

3.0 cotton. Use lowest recommended detergent amount.

Woollens, labelled with the Woolmark and identified as machine washable, as well as

1.0 textiles made of silk, linen, wool and viscose marked as handwashable.

Normally soiled cotton laundry. At 40°C and 60°C most favourable programme in terms

6.0 of combined water and energy consumption for washing cotton laundry.

– Yes

– 6.0 Same as the last rinse and the final spin in the “Cotton” programme. – –

Spin Centrifuga – 6.0 In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme. – – –

Drain Scarico – – Drain only - no spinning. Alternative method of terminating programme after “Rinse hold”. – – –

Main wash

Yes

Softener Start

delay

Avvio

ritardato

i i

Pre-

Rapid

Quick

time

Intensive

rinse

Risciacquo

intensivo

wash

Pre-

lavaggio

i i i i i

– –

i i i i i

– –

– – –

– –

Rinse

hold

Anti piega

i i i

–

i i

i i i

i i

i i i

– – – –

– – – – – –

Spin

Centri-

fuga

spin

speed

rpm

Max

i: optional / Yes : dosing required

5019 612 10335

CONSUMPTION DATA

Programme

Cotton / Antibacterial 95 6.0 53* 1.91 2:05 1:55

Cotton 60 6.0 48 1.14 2:30 1:45 Cotton 40 6.0 48 0.64 2:15 1:30

SuperEco 60 6.0 55 0.78 4:00 – Synthetics 60 3.0 50* 0.90 2:05 1:14 Synthetics 40 3.0 40 0.50 1:50 0:59

Delicates 40 1.5 50 0.55 0:45 – Daily load 40 3.0 40 0.45 1:00 – Speed 15´ 30 3.0 30 0.15 0:15 –

Wool/Handwash 40 1.0 40 0.55 0:35 – Wool/Handwash 20 1.0 40 0.40 0:30 –

Eco Cotton** 60 6.0 48 1.02 4:00 – Eco Cotton** 60 3.0 35 0.76 2:10 –

Eco Cotton 40 6.0 48 0.65 2:50 –

Eco Cotton** 40 3.0 35 0.57 2:00 –

Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.Water and energy consumption refer to the default setting of the programmes; selecting special options or modifying spin speed or temperature will change the consumption data.

The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also “Troubleshooting Guide” in your Instructions for Use). * To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out. ** Reference Programmes for Energy Label.

Temperature

(°C)

PREPARATION OF THE WASH CYCLE

1. Load the machine, close the drum doors and

checkthat they are properly locked.

2. Add detergent and eventual additives as described

on the front page and in your Instructions for use.

3. Close the lid.

4. Turn the programme selector to the desired

programme and temperature. The lamp next to the

“Start(Pause)” button flashes.

SELECT THE DESIRED OPTION(S)

Selecting or deselecting an option can be done at any time during the programme. The option will be applied as long as the corresponding programme phase has not been executed yet.

“Prewash” button

• Only for heavily soiled loads (for example

sand, granular dirt). Increases the cycle time by approximately 20 min.

“Rapid” button

• Enables quicker washing by shortening the

programme duration.

• Recommendable for small loads or only lightly soiled

laundry.

“Intensive rinse” button

• The amount of water is increased to ensure a more

Load

(kg)

Water

(l)

Energy

without “Rapid”

(kWh)

Approx. Programme Duration (hrs : min)

without “Rapid” with “Rapid”

“Rinse hold” button

• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.

• This option is particularly recommended for the “Synthetics”, “Daily load” and “Delicates” programmes.

• It is useful if you want to postpone spinning to a later time, or if you want to drain out only.

• If you select “Rinse Hold”, do not leave items to soak for too long.

• As soon as the appliance stops in the rinse hold, the “Rinse hold” lamp of the sequence indicator lights up and the lamp next to the “Start(Pause)” button flashes.

Terminate the “Rinse hold” option:

• Press the “Start(Pause)” button; the programme will terminate automatically with the final spin cycle for the present wash programme.

• If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” programme and press the “Start(Pause)” button.

“Spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is

cancelled but intermediate spin peaks remain during the rinse. The water is drained out only.

intensive rinse.

• This option is particularly suitable for areas with very soft water, washing baby linen and people with skin allergies.

START DELAY

The “Start delay” button allows the user to run the machine at his convenience, for example at night when electricity is cheaper.

• Select programme, spin speed and options.

• Press the “Start delay” button several times to

select a delay time of 1, 3, 6, 9 or 12 hours. The corresponding indicator lamp lights up.

• Start the programme (see “Progremme Start”). The indication next to the “Start delay” button lights up and goes off when the programme starts.

• Once having pressed the “Start(Pause)” button, the countdown of the time delay begins. When the programme starts, the start delay indicator light goes off and is replaced by the programme sequence indication.

• After the “Start(Pause)” button has been pressed, the number of hours preselected can be reduced by pressing again the “Start delay” button.

To cancel the “Start delay” ..before you press the “Start(Pause)” button:

• Turn the programme selector to another position or press the “Reset” button.

..after having pressed the “Start(Pause)” button:

• Press the “Reset” button for at least 3 second. The start delay indicator light goes off.

PROGRAMME START

Open the tap and press the “Start(Pause)” button. The indication lamp next to the “Start(Pause)” button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain. When the programme phrase is finised, the corresponding indication goes out.

• Note: If there is a power interruption or if the appliance is disconnected during the cycle, the programme will run again from the point where it was interrupted.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show the the lid can be opened. As long as a wash programme is running, the lid remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel a running programme before the end”.

FAILURE INDICATIONS

In case of any failures or irregularities, consult the “Troubleshooting Guide” in your Instructions for Use.

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your “Instructions for Use”; if the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open the water tap: if the indications still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned: in the latter case refer to the Instructions for Use (“Removing the Filter”).

PROGRAMME END

• All the lights of the programme sequence indicatorare off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/ O”position.

2. Close the water tap.

3. Open lid and drum and unload the machine.

4. Leave the lid open for some time to allow the interior of the machine to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

• Press the “Start(Pause)” button to pause the programme. The light flashes.

• Select the new programme, any options and another spin speed if you want.

• Press the “Start(Pause)” button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

The “Reset” button cancels a programme before the end. Press the “Reset” button for at least 3 seconds. Any existing water is drained out before the door can be opened.

5019 612 10335