Whirlpool TG 1010 INSTRUCTION FOR USE

60105062GB.fm Page 1 Friday, May 14, 2010 10:53 AM

GB PROGRAMME CHART

A. “Door open” indication This washing machine is equipped with

automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B. “Service” indication C. “Water tap closed” indication D. “Clean pump” indication

C D

E. Programme selector F. “Start (Pause)” button

}

G. “Spin” button

A B

H. Programme sequence indicator I. “Reset” button

J. “Start delay” button

K. Time display

Cotton

40 - 60 - 95 °C

SuperEco

60 °C

Synthetics

30 - 40 - 60 °C

Delicates

30 - 40 °C

Daily load

40 °C

Quick wash

30 °C

Wool

Cold - 40 °C

Programme

40 - 60 - 95 °C

30 - 40 - 60 °C

Rápido 30min.

Algodón

SuperEco

60 °C

Sintéticos

Delicados

30 - 40 °C

40 °C

30 °C

Lana

frío - 40 °C

Care

Labels

Max. Load

- Respect the manufacturer’s recommendations on the care label

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts

8.0

etc. made of cotton and linen.

Normally to heavily soiled and robust bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Offers highest economy in energy co nsumption by prolonged washing duration. Ideal

8.0

to be run overnight to additionally profit from the more favourable energy rates. To avoid noise of spinning at night, set spin speed to “0” and start spin programme in the morning, or define programme start with “Start Delay” accordingly.

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen,

3.0

Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Curtains and delicate clothing, dresses skirts, shirts and blouses.

1.5

Slightly to normally soiled textiles made of cotton and/or synthetics.

4.0

Shortly worn outer clothing made of cotton, polyester, polyamide and blends

4.0

with cotton. Only woollens, labelled with the Woolmark and identifie d as machine

1.0

washable.

Type of wash/Notes

Detergents and additives Special options Pre-

Main

wash

❉

—

❉

—

wash

Yes

Softener Start

diferído

❉❉❉❉❉❉❉❉

❉❉

❉❉❉❉❉❉❉❉

❉❉

Eco

delay

Inicio

Eco

—— —

—

——

—— —

Prewash

Prelav.

❉

Easy

ironing

Planchado

fácil

—

❉❉❉❉

Cold wash

Lavado

en frío

Rinse

hold

Paro con

cuba llena

Spin

Centrif.

❉❉❉

Max.

Spin

Speed

rpm

max.

1000

max.

1000

Handwash

30 - 40 °C

Rinse & Spin Aclarado y Centrif.

Intensive Spin Centrif. Intensivo

Drain Desagüe

optional / Yes : dosing required

❉

For improved garment care, spin speed is restricted in these programmes.

Black process 45.0° 150.0 LPI

A mano

30 - 40 °C

— — ——

Textiles made of linen, silk, wool and viscose marked as “handwashable”.

1.0

Same as the last rinse and the final spin in the “Cotton” programme.

8.0

In this programme spinning is intensive. Same as the spin cycle in the “Cotton”

8.0

programme. Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”.

Yes

—

——

❉❉

——— ———

—— —

—— — — —— — —

❉

—— — — — — —

❉

❉❉❉

❉❉ ❉❉

5019 601 05062

400

max.

60105062GB.fm Page 2 Friday, May 14, 2010 10:53 AM

CONSUMPTION DATA

Programme

Cotton 95 8.0 82 Cotton 60 8.0 59 1.36 3:30

Cotton with “Eco”

Cotton 40 8.0 77 0.75 2:05

SuperEco 60 8.0 75 0.95 4:00 Synthetics 60 3.0 46 Synthetics 40 3.0 42 0.40 1:20

Delicates 30 1.5 60 0.50 0:45 Daily load 40 4.0 48 0.50 1:00

Quick wash 30 4.0 48 0.25 0:30

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

* The remaining time indicator can deviate from the values in the table, because it takes into account the household conditions applicable at that time. ** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out. *** Reference Programme for Energy Label.

Handwash 40 1.0 45 0.55 0:40

***

Wool 40 1.0 60 0.55 0:45

Tem pe ra ture

(°C)

60 8.0 59 1.20 4:00

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use.

1. Turn the

2. The

3. The

programme selector

and temperature.

time display

programme (in hours and minutes), and the indication lamp next to the

indication lamp

shows the duration of the chosen

“Start (Pause)”

of the predefined spin speed lights up.

to the desired programme

button blinks.

SELECT ANY DESIRED OPTION

Push the button(s) of any option(s) desired - the respective indication lights up.

When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Eco” button

• With a modified temperature profile and a prolonged washing duration, the optimum combination of excellent washing result and even lower energy consumption is achieved.

“Prewash” button

• Only for heavily soil ed lo ads (for example sand, granular dirt) sensible. Increases the cycle time by approximately 15 min.

• Do not use liquid detergent for the main wash when activating the “Prewash” option.

Load

(kg)

Water

(l)

“Easy ironing” button

• Can be used together with “Cotton”, “Synthetics” and “Daily

• Increases the water quantity and the clothes are spun very gently .

“Cold wash” button

• Water is heated only up to 20°C.

• Suitable for delicate laundry items with wash temperature

• Selectable only on the lowest temperature step of each programme.

“Rinse hold” button

• The laundry remains in the last rinse water without

• This option is particularly recommended for the programmes

• It is particularly useful if you want to postpone spinning to a

• If you select “Rinse hold”, do not leave the items to soak for

Terminate the “Rinse hold” option:

• Press the

• If you do not wish to spin the clothes, turn the programme

Energy

(kWh)

2.40 2:10

0.80 1:35

load” programmes to make ironing easier .

recommendation of max. 30° on the care label.

progressing to the final spin cycle to avoid creasing and prevent colours from changing.

“Synthetics”, “Daily load” and “Delicates”.

later time, or if you want to drain only.

too long.

The programme stops to “Rinse hold” at the time the

Note:

“Rinse hold” light in the programme sequence indication is on. The indication lamp next to the

“Start (Pause)”

terminate automatically with the final spin cycle for the present wash programme.

selector knob to the “Drain” programme and press the

button.

(Pause)”

Approx. Programme Duration

(hours : minutes)

“Start (Pause)”

button. The programme will

button blinks.

“Start

“Spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin sp eed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during rinse. The water is drained out only.

START DELAY

The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating the “Start delay”.

• Select programme, temperature and options.

• Press the “Start delay” button to select the delay time by 1 to 23 hours.

•Press the

• The time delay indication disappears when the programme

• Once having pressed the

To cancel the “Start delay” ...before you press the “Start (Pause)” button:

• Turn the programme selector to another position or press the

...after having pressed the “Start (Pause)” button:

•Press

“Start (Pause)”

The indication of the “Start delay” button blinks and the countdown of the delay time begins. The “Start delay” indication lamp and the dot on the display will keep blinking until the programme starts.

starts and it is replaced by the remaining programme time.

of hours preselected can be reduced by pressing again the “Start delay” button.

button.

“Reset”

“Start (Pause)”

display. Press programme immediately.

“Start (Pause)”

button.

“Start (Pause)”

- the delay time disappears from the again to start the selected

button, the number

PROGR AMME START

Open the tap and press the indication lamp of the programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain.

The time display shows the remaining programme time. Due to variations in load and temperature of inlet water, the remaining time is newly calculated in certain programme phases. If this is the case, an animation appears on the time display.

“Start (Pause)”

button. The

button lights up. The

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Reset a running programme before the end”.

RED INDICATIONS

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your Instructions for Use. If the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open the water tap. If the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned. In the latter case refer to the Instructions for Use (“Removing the Filter”).

PROGRAMME END

• All the lights of the programme sequence indicator are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the

2. Select the new programme and, if you want, another spin

3. Press the

“Start (Pause)”

The light blinks.

speed and any options.

“Start (Pause)”

continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

button to pause the programme.

button again. The new programme

RESET A RUNNING PROGRAMME BEFORE THE END

The

•Press the

button cancels a programme before the end.

“Reset”

button for at least 3 seconds. “rES”

“Reset”

appears on the display. Any existing water is drained out before the door can be opened. It may last a while until you can open the door .

5019 601 05062

Black process 45.0° 150.0 LPI