®
30" Freestanding Gas Range
PRODUCT MODEL NUMBERS
SF110AXS WFG110AV
WFG111SV
Gas supply: Use 3/4" rigid pipe gas supply line to the range location. A smaller size pipe on long runs may result in insufficient gas supply. With L.P. gas, piping or tubing size can be 1/2" minimum. If local codes permit, it is recommended that new flexible metal tubing, design-certified by CSA, 1/2-inch or 3/4-inch I.D., be used for connecting the range to the rigid gas supply line. A 1/2" male pipe thread is needed for connection to pressure regulator female pipe threads. An individual manual shutoff valve must be located in the same room, but external to the range.
Electrical: A 120-volt, 60 Hz, AC-only, 15 amp, electrical supply fused on both sides of the line. A separate circuit is recommended. A time-delay fuse or circuit breaker is recommended.
CABINET OPENING DIMENSIONS
OVERALL DIMENSIONS
26-3/4" (67.9 cm) depth with handle
36" (91.4 cm) cooktop height
46-1/4" (117.5 cm) overall height for tall backguard models
24-1/4" (61.6 cm)
29-7/8" (75.9 cm) width
13" (33.0 cm) max. upper cabinet depth
18" (45.7 cm) min. clearance upper side cabinet to countertop
This shaded area recommended for electrical outlet.
Contact a qualified floor covering installer to check that the floor covering can withstand at least 200°F.
Use an insulated pad or 1/4" (6.4 mm) plywood under range if installing range over carpeting.
30" (76.2 cm) min. cabinet opening width
30-1/8" (76.5 cm) opening
width
2" (5.1 cm) min. countertop space to side wall or other combustible material
For minimum clearance to top of cooktop, see
NOTE.***
|
|
|
|
This shaded area |
Do Not seal the range to |
|
|
|
|
|
recommended |
the side cabinets. |
|
|
|
|
|
for installation of |
||
|
|
|
|
|
||
|
|
|
|
gas pipe. |
If cabinet depth is greater |
|
|
|
|||||
|
|
|
|
|
than 24" (61.0 cm), oven |
|
|
|
|
|
|
||
|
|
|
|
|
frame must extend |
|
|
|
|
|
|
||
|
|
|
|
|
beyond cabinet fronts by |
|
|
|
10" |
|
|||
|
|
|
1/2" (1. 3 cm) min. |
|||
24" |
||||||
(25.4 cm) |
|
|||||
(61 cm)
|
|
|
|
8" |
|
|
|
5" |
(20.3 cm) |
|
|
2" |
(12.7 cm) |
|
|
5" |
(5.1 cm) |
|
*** NOTE: 24" (61.0 cm) min. when bottom of wood or metal cabinet is |
3" |
|
|
protected by not less than 1/4" (6.4 mm) flame retardant millboard |
|
(12.7 cm) |
|
|||
(7.6 cm) |
|
covered with not less than No. 28 MSG sheet steel, 0.015" (0.4 mm) |
||
stainless steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.
30" (76.2 cm) min. clearance between the top of the cooking platform and the bottom of an unprotected wood or metal cabinet.
Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation |
Ref. W10032070B |
Instructions packed with product. Specifications subject to change without notice. |
07-15-08 |
Loading...