Whirlpool SERIES 980 Use And Care Manual
A Note to You ......................... 2
Dishwasher Safety ................. 3
Parts and Features................. 4
Starting Your Dishwasher ..... 5
Loading Your Dishwasher..... 7
Using the Dispensers .......... 11
Setting the Controls............. 13
Selecting a wash cycle ..... 13
Using Cancel/Drain........... 14
Selecting cycle options ..... 15
Changing a cycle or
an option setting ............... 15
Adding a dish during
a cycle .............................. 16
Using the delay
wash cycle........................ 16
Understanding the
status indicators ............... 17
Washing Special Items ........ 18
Caring for Your
Dishwasher........................... 19
Saving Energy ...................... 22
Solving Common
Dishwashing Problems ....... 23
Troubleshooting................... 26
Requesting Assistance
or Service ........................ 27-28
Index...................................... 29
Warranty ............................... 31
*
Home Appliances
DISHWASHER MODEL SERIES 980
3376835
Use And Care
GUIDE
2
A Note to You
Thank you for buying a WHIRLPOOL* appliance.
Because your life is getting busier and more complicated, WHIRLPOOL dishwashers are
easy to use, save time, and help you manage your home better. To ensure you enjoy years
of trouble-free operation, we developed this Use and Care Guide. It contains valuable information about how to operate and maintain your appliance properly and safely. Please read
it carefully.
Also, please complete and mail the Ownership Registration Card provided with your
appliance. This card helps us notify you about any new information on your appliance.
Please record your model’s information.
Whenever you call to request service for
your appliance, you need to know your
complete model number and serial number.
You can find this information on the model
and serial number label (see diagram on the
“Parts and Features” section for location of
label).
Please also record the purchase date of
your appliance and your dealer’s name,
address, and telephone number.
Keep this book and the sales slip together in a safe place for future reference.
Help us help you
Please:
• Have your dishwasher installed by a
qualified installer.
• Install where dishwasher is protected from
the elements.
• Install and level dishwasher on a floor that
will hold the weight, and in an area suitable
for its size and use.
• Properly connect dishwasher to electricity,
water, and drain.
†
†
See Installation Instructions for complete
information.
Model Number __________________________
Serial Number __________________________
Purchase Date __________________________
Dealer Name ___________________________
Dealer Address _________________________
Dealer Phone ___________________________
• Remove all shipping plugs from hoses and
connectors (such as the cap on the drain
outlet) before installing.
†
• Remove all hang tags and temporary
labels.
• Make sure dishwasher is not used by
anyone unable to operate it properly.
• Properly maintain dishwasher. See the
“Caring for Your Dishwasher” section.
3
You will be killed or seriously injured
if you don’t follow instructions.
You can be killed or seriously injured
if you don’t follow instructions.
IMPORTANT SAFETY INSTRUCTIONS
• Do not operate the dishwasher unless
all enclosure panels are properly in
place.
• Do not tamper with controls.
• Do not abuse, sit on, or stand on the
door or dish racks of the dishwasher.
• To reduce the risk of injury, do not
allow children to play in or on the
dishwasher.
• Under certain conditions, hydrogen gas
may be produced in a hot water system
that has not been used for two weeks
or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not
been used for such a period, before
using the dishwasher turn on all hot
water faucets and let the water flow
from each for several minutes. This will
release any accumulated hydrogen gas.
As the gas is flammable, do not smoke
or use an open flame during this time.
• Remove the door to the washing
compartment when removing an old
dishwasher from service or discarding it.
WARNING – When using the
dishwasher, follow basic precautions,
including the following:
• Read all instructions before using the
dishwasher.
• Use the dishwasher only for its
intended function.
• Use only detergents or rinse agents
recommended for use in a dishwasher
and keep them out of the reach of
children.
• When loading items to be washed:
1) Locate sharp items so that they
are not likely to damage the door
seal; and
2) Load sharp knives with the handles
up to reduce the risk of cut-type
injuries.
• Do not wash plastic items unless they
are marked “dishwasher safe” or the
equivalent. For plastic items not so
marked, check the manufacturer’s
recommendations.
• Do not touch the heating element
during or immediately after use.
Your safety and the safety of others is very important.
We have provided many important safety messages in this manual and on your
appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to hazards that can kill or hurt you and others.
All safety messages will be preceded by the safety alert symbol and the
word “DANGER” or “WARNING.” These words mean:
wDANGER
wWARNING
All safety messages will identify the hazard, tell you how to reduce the chance of injury,
and tell you what can happen if the instructions are not followed.
– SAVE THESE INSTRUCTIONS –
Dishwasher Safety
4
NORMAL
LOW
ENERGY
HEAVY
POTS
-N-
PANS
HIGHHIGH
TEMPTEMP
WASHWASH
LOWLOW
ENERGYENERGY
RINSERINSE
AIR DRYAIR DRY
OPTIONS
RINSING DRYING CLEAN
CYCLES
WATER HEATINGWATER HEATINGLOCK OUTLOCK OUT
4 HOUR4 HOUR
DELAYDELAY
STARTSTART
CANCEL
DRAIN
STATUS
WASHING ADD-A-DISH
WASHWASH
LATERLATER
RINSERINSE
CHINACHINA
CRYSTALCRYSTAL
Press 5 Seconds to Press 5 Seconds to
Lock OutLock Out
or release Controls or release Controls
Top rack adjuster
(p. 10)
Upper spray arm
(p. 9)
Spray tower
(p. 9)
Fold-down divider
(p. 9)
Model and serial
number label
(on right side)
POWER CLEAN*
module
(p. 30)
Lower spray arm
(p. 9)
Overfill protector
(p. 19)
Detergent
dispensers
(p. 11)
Rinse agent
dispenser
(p. 12)
Access panel
†
Third level wash
(p. 10)
Adjustable top rack
(p. 10)
Extra-capacity
fold-down shelf
(not shown)
(p. 10)
Water inlet opening
(p. 9)
Rack bumper
(p. 9)
Bottom rack
(p. 9)
Heating element
Silverware
basket
(p. 8)
Cutlery
basket
(p. 7)
Door latch
Door color panel
†
Control panel
Your dishwasher has a row of push pads to select cycles and options. You must select a
cycle to start your dishwasher. You may select one or more options.
Parts and Features
Your dishwasher is illustrated below with the parts and features called out. To help you find
information on specific parts or features quickly, page references are included.
†
See Installation Instructions
for more information.
Status
indicators
5
SAFETY FIRST
Star ting Your Dishwasher
This section tells you how to start or stop your dishwasher. Refer to it for quick reference.
GROUNDING INSTRUCTIONS
• For a grounded, cord connected
dishwasher:
The dishwasher must be grounded. In
the event of a malfunction or breakdown,
grounding
will reduce the risk of
electric
shock by providing a path of least
resistance for electric current. The
dishwasher is equipped with a cord
having an equipment-grounding conductor and a grounding plug. The plug must
be plugged into an appropriate outlet that
is installed and grounded in accordance
with all local codes and ordinances.
WARNING – Improper connection of
the equipment-grounding conductor can
result in a risk of electric shock.
wWARNING
Electrical Shock Hazard
Electrically ground dishwasher.
Connect ground wire to green
ground connector in terminal box.
Do not use an extension cord.
Failure to do so can result in death,
fire, or electrical shock.
Check with a qualified electrician or
service representative if you are in
doubt whether the dishwasher is
properly grounded. Do not modify the
plug provided with the dishwasher; if it
will not fit the outlet, have a proper
outlet installed by a qualified electrician.
• For a permanently connected
dishwasher:
The dishwasher must be connected to a
grounded metal, permanent wiring
system, or an equipment-grounding
conductor must be run with the circuit
conductors and connected to the
equipment-grounding terminal or lead
on the dishwasher.
– SAVE THESE INSTRUCTIONS –
wWARNING
Tip Over Hazard
Do not use dishwasher until
completely installed.
Do not push down on open door.
Doing so can result in serious injury
or cuts.
6
Starting a wash cycle
1. Load the dishwasher. See the “Loading
Your Dishwasher” section.
2. Spin the spray arms. They should
turn freely.
3. Add detergent. See the “Using
the Dispensers” section.
4. Add rinse agent, if needed.
5. Close door firmly until it latches.
Stopping the dishwasher
You can stop your dishwasher anytime
during a cycle. All you have to do is:
• Open the door slightly. Wait for any filling
or spraying action to stop before opening
the door all the way. Close door to continue cycle.
OR
• Press Cancel/Drain. Once pressed, a
2-minute drain starts.
6. Run hot water at the sink nearest the
dishwasher until water is hot.
Turn water off.
7. Press a Cycle pad. If desired, press one
or more Option pads. The
dishwasher starts filling once
you press a Cycle pad unless
you select the delay wash
cycle. You may press Option
pads as the machine is filling.
The pad indicator glows red when a cycle
or an option is selected.
STARTING YOUR DISHWASHER
7
Loading Your Dishwasher
This section tells how to properly load your dishwasher for best washing and rinsing results.
Preparing to load the dishwasher
• To save water and energy, do not rinse
dishes before putting them into the
dishwasher.
• Remove large pieces of food, bones, and
other hard items. The POWER CLEAN*
module removes food particles from the
water. The module contains a chopping
device which reduces the size of food items.
NOTE: If hard items such as fruit seeds,
nuts, and egg shells enter the POWER
CLEAN module, you might hear chopping,
grinding, crunching, or buzzing sounds.
Those sounds are normal when hard items
enter the module. Do not let metallic items
(such as pot handle screws) get into the
POWER CLEAN module. Damage can
occur.
• Foods like eggs, rice, pasta, and cooked
cereals may be hard to remove if left to dry
over a period of time. Run a Rinse/Wash
Later cycle to keep dishes moist if you do
not plan to wash them soon.
Loading the cutlery basket
Use the cutlery basket to hold long items.
Always unload or remove the cutlery basket
before unloading the racks to avoid spilling
water on the cutlery.
IMPORTANT: Remove the basket and tip
the contents onto a cutting board to unload.
This helps avoid accidents with sharp points
and edges.
To remove the cutlery basket:
1. Grasp the basket on both sides and slide
it toward the top of the door.
2. Lift the basket off the holding buttons.
To replace the cutlery basket:
1. Set the basket on the holding buttons.
2. Slide the basket toward the bottom of the
door until it locks into place.
• Load dishes so soiled surfaces face the
rotating spray arm.
• Load dishes so they are not stacked or
overlapping. It is important for the water
spray to reach all soiled surfaces for best
washing. For best drying, water must be
able to drain from all surfaces.
Loading for quiet operation
• Secure lightweight load items in the racks.
• Pot lids and handles, pizza pans, cookie
sheets, etc. should not touch interior walls,
interfere with the spray arm’s rotation, or
cover the spray tower.
• Load dishes so they do not touch one
another.
NOTE: Keep sink drain plugs inserted
during dishwasher operation to prevent
noise transfer through drains.
8
Loading the silverware basket
• Load the silverware basket while it is in the
door or take the basket out for loading on a
counter or table.
• Mix items in each section of the basket
with some pointing up and some down to
avoid nesting. Spray cannot reach nested
items.
IMPORTANT: Always load sharp items
(knives, skewers, forks, etc.) pointing
down.
• Put small items (baby bottle caps, jar lids,
etc.) in any section.
• You can also remove the basket for easy
unloading. Always unload or remove the
basket before unloading the racks to avoid
spilling water on the silverware.
To remove the basket:
1. Grab the basket by the handle and slide it
toward the top of the door.
2. Lift the basket off the holding buttons.
To replace the basket:
1. Set the basket on the holding buttons.
2. Slide the basket towards the bottom of
the door until it locks in place.
To open the basket:
• Unhook the latch as shown.
NOTE: Be sure the cover is completely
latched before pulling out the bottom rack
and before closing the dishwasher door.
LOADING YOUR DISHWASHER
9
Loading the bottom rack
Load items with cooked-on or dried-on food
in the bottom rack, with soiled surfaces
facing inward to the spray.
Mixed load
• Load plates, soup bowls, etc., between
prongs and facing inward to the spray.
• Make sure pot handles and other items do
not stop rotation of the spray arms. Spray
arms must move freely.
• Load items so they do not block or cover
the spray tower.
• Load heavily soiled cookware face down
in the rack.
• Do not stack or overlap dishes. Water
spray must reach all soiled surfaces for
best results.
Utensil load
• Load cookie sheets, cake pans, and other
large items at sides and back. Loading
such items in front may keep water spray
from reaching detergent dispenser and
silverware basket.
NOTES:
• Do not load glasses, cups, or plastic items
in the bottom rack.
• Do not load items between the bottom rack
and the side of the dishwasher tub. This
can block the water inlet opening.
• If you have removed the bottom rack for
unloading or cleaning, replace it with
bumpers in front.
Fold-down divider
Use the fold-down divider at the back of
the rack to make room for deep bowls,
roasters, etc.
Mixed load
Do not cover spray tower
Utensil load
Bumpers must
face dishwasher door
LOADING YOUR DISHWASHER
10
Loading the top rack
Load the top rack with cups, glasses, and
smaller items. Do not cover the third level
wash when loading the top rack.
Cup and glass load
• Load so open ends face down for cleaning
and draining.
• Load glasses in top rack only – bottom rack is
not designed for glasses. Damage can occur.
• Place items in the rows between prongs.
Placing them over the prongs may lead to
breakage.
• Secure lightweight items.
• China, crystal, and other delicate items
must not touch each other during dishwasher operation. Damage may occur.
Mixed load
• Small bowls, pans, and other utensils can
be placed in the top rack.
• Load plastic items in the top rack only.
Plastic items may melt in the bottom rack.
• Wash only plastic items marked “dish-
washer safe.”
• Load plastic items so the force of the spray
does not move them during the cycle.
Extra-capacity
fold-down shelves
Use the fold-down shelves on both sides of
the top rack for extra loading space. Fold
them down over short items such as cups,
juice glasses, cereal bowls, etc.
• Adjust rack height if necessary.
• To avoid chipping, do not let stemware
touch other items.
Infinite adjustable top rack
Raise or lower the rack to fit tall items in
either the top or bottom rack. The top rack
does not have to be level.
• Turn the knob clockwise to raise a side of
the rack.
• Turn the knob counterclockwise to lower a
side of the rack.
Cup and
glass load
Do not cover third level wash
Mixed load
Raise
Lower
LOADING YOUR DISHWASHER
11
Using the Dispensers
For best washing results, review the information below. It is important to use detergents and
rinse agents properly.
Using the detergent dispenser
• Use automatic dishwashing detergent
only. Other detergents are too mild and
much too sudsy.
• Add detergent just before starting cycle.
• Store tightly closed detergent in a cool, dry
place. Fresh automatic dishwasher
detergent results in better cleaning.
Filling the detergent dispenser
The detergent dispenser has one section
with a cover and one without. Push cover
down firmly until it latches. Detergent in the
open section falls into the dishwasher when
closing the door. The covered section opens
automatically for the main wash.
NOTE: It is normal for the cover to open
partially when dispensing detergent.
Cover latchCover
Use only covered
section for:
– Low Energy
– China/Crystal
Use both sections for:
– Normal
– Heavy
– Pots-N-Pans
How much detergent to use
• The amount of detergent to use depends
on the hardness of your water and the type
of detergent. If you use too little, dishes
won’t be clean. If you use too much in soft
water, glassware will etch.
• Different brands of dishwasher detergent
have different amounts of phosphorus for
softening water. If you have hard water
and use low phosphorous content detergent (6.0% or less), you may need to use
more detergent or use a detergent with a
higher phosphorous content (8.7%).
• Find out your water’s hardness by asking
your local water department, water softener company, or county extension agent.
WHERE TO FILL
Top of
3rd step
(3 tbs)
Top of
2nd step
(2 tbs)
Top of
1st step
(1 tbs)
WATER TYPE
Hard
8+ grains per gallon
136+ parts per million
Medium
5-7 grains per gallon
85-119 parts per million
Soft
0-4 grains per gallon
0-68 parts per million
Fill amounts shown are for standard
powdered detergent. Amounts may vary if
you use liquid or concentrated powdered
detergent. Follow manufacturer’s directions
when using liquid dishwasher detergent or
concentrated powdered detergent.
12
Using the rinse agent dispenser
Keep the rinse agent dispenser filled with a
liquid rinse agent. A rinse agent greatly
improves dish drying by helping water
flow off them during the last rinse. A rinse
agent also keeps water from forming
droplets and drying as spots or streaks.
A small amount of rinse agent automatically releases into the rinse water during the
final rinse of each cycle. For best drying
results, check dispenser periodically to
see if it needs filling.
To check dispenser:
• Check center of Fill Indicator Cap. Clear
means it needs filling.
OR
• Remove Fill Indicator Cap. An “E” is visible
when dispenser is empty.
To fill dispenser:
The rinse agent dispenser holds 6 ounces
(175 mL). Under normal conditions, this
lasts about 3 months.
1. Open dishwasher door completely.
2. Remove Fill Indicator Cap.
3. Add rinse agent. Fill to smallest opening
in lower part of dispenser only. Overfilling
may cause rinse agent to leak out. This
will not harm the dishwasher, but could
cause oversudsing.
4. Clean up any spilled rinse agent with a
damp cloth.
5. Replace Fill Indicator Cap. Keep it closed
tightly.
NOTE: You do not have to wait until the
dispenser is empty before refilling, but do
not overfill it. Your dishwasher is designed
to use a liquid rinse agent. You do not need
to use a solid or bar-type rinse agent.
OR
“E” visible
when empty
R
I
N
S
E
A
I
D
I
N
D
I
C
A
T
O
R
Cap center clear
when empty
USING THE DISPENSERS
Keep dispenser filled for best drying results
Do not fill past
smallest opening
13
Setting the Controls
Operating your dishwasher’s controls properly helps you obtain the best possible washing
results. This section tells you how to select wash cycles and options.
Selecting a wash cycle
Press a Cycle pad. The dishwasher starts filling once you press a Cycle pad unless you
select the delay wash cycle. You may press Option pads as the machine is filling.
CYCLE
CYCLE
TIME
(Minutes)DRY
RINSE
MAIN
WASH
RINSEWASH
A “•” shows what each cycle includes
12••
••••60
†
••
•
60
†
•
WASH
LATER
RINSE
CHINA
CRYSTAL
LOW
ENERGY
RINSE/WASH LATER
For rinsing a few items to
be washed one or more
days later.
• Do not use detergent.
• Water is not heated
during Rinse/Wash Later.
• Air Dry is automatically selected.
CHINA/CRYSTAL
Light wash and a gentle
dry for china and crystal.
• Select High Temp
Wash to heat water in
the main wash.
• The water heats to 140°F (60°C) in
the final rinse unless you select
Low Energy Rinse.
LOW ENERGY
Single wash for prerinsed
or lightly soiled loads.
• Select High Temp
Wash to heat water in the
main wash.
• The water heats to 140°F (60°C) in
the final rinse unless you select
Low Energy Rinse.
FINAL
RINSE
†
Cycle time includes dry time and may be longer depending on the temperature of water entering the dishwasher.
The cooler the water, the longer the cycle time. If the water is already hot enough, the cycle times will be as shown.
continued on next page
14
NORMAL
Double wash for normal,
everyday soiled loads.
(The Energy Guide label
is based on this cycle.)
• Select High Temp
Wash to heat water in the main
wash.
• The water heats to 140°F (60°C) in
the final rinse unless you select
Low Energy Rinse.
HEAVY
Double wash for cleaning
heavily soiled loads.
• Select High Temp
Wash to heat water in
the main wash.
• The water heats to 140°F (60°C) in
the final rinse unless you select
Low Energy Rinse.
POTS-N-PANS
Double wash for maximum
cleaning of cooked-on or
baked-on foods.
• The water heats to
140°F (60°C) in both
washes.
• The water heats to 140°F (60°C) in
the final rinse unless you select
Low Energy Rinse.
CYCLE
CYCLE
TIME
(Minutes)
FINAL
RINSERINSE
MAIN
WASHRINSEWASH
A “•” shows what each cycle includes
66
†
NORMAL
•
•
HEAVY
POTS
-N-
PANS
••
•••76
†
•••
••••76
†
•
•
†
Cycle time includes dry time and may be longer depending on the temperature of water entering the dishwasher.
The cooler the water, the longer the cycle time. If the water is already hot enough, the cycle times will be as shown.
Using Cancel/Drain
Press Cancel/Drain to cancel a cycle or
clear option selections.
To cancel a cycle:
• Press Cancel/Drain while the dishwasher
is running to start a 2-minute drain. It will
take a few seconds for the drain to start.
If desired, select a new cycle. (See the
“Changing a cycle or an option setting”
section.)
CANCEL
DRAIN
SETTING THE CONTROLS
DRY
•
15
• You can press Cancel/Drain again to
stop the drain immediately. Remember
to drain the dishwasher again before
starting a new cycle.
NOTE: A small amount of water remaining
in the dishwasher is normal.
Selecting cycle options
You can press an Option pad after the
dishwasher starts as long as the cycle is not
past the point that the option is used. For
example, you can press Air Dry any time
before the Drying indicator glows.
After a wash cycle, the dishwasher
remembers the options used and uses the
same options in the next wash cycle unless
new options are selected or the Cancel/
Drain pad is pressed.
High Temp Wash
When High Temp Wash is selected, the
dishwasher heats the water during
the main wash of the China/
Crystal, Low Energy, Normal , and
Heavy cycles. Heating the water
helps improve washing results.
The Pots-N-Pans cycle automatically uses
High Temp Wash.
Changing a cycle or an option setting
During the first minute of
a cycle
1. Press new Cycle and/or Option pads.
2. Check the detergent dispensers. They
must be filled properly for the new cycle.
After the first minute of a cycle
1. Press Cancel/Drain. A 2-minute drain
cycle starts. Wait for drain cycle to finish.
2. Press a new Cycle pad.
Low Energy Rinse
When Low Energy Rinse is selected,
the dishwasher does not heat
the water during the final rinse
of China/Crystal, Low Energy,
Normal, Heavy, and Pots-N-Pans
cycles.
NOTE: Low Energy Rinse saves energy, but
dishes take longer to dry and some spotting
can occur. For best rinsing and drying
results, use a liquid rinse agent.
Air Dry
When Air Dry is selected, the air in the
dishwasher is not heated during
the “dry” portion of a cycle. Using
Air Dry helps save energy, but
dishes take longer to dry and
some spotting can occur. Some
items (such as plastics) may need towel
drying. For best drying, use a liquid rinse
agent.
NOTE: The dishwasher automatically heats
the air in the dishwasher during the “dry”
portion of the cycle unless you select
Air Dry.
AIR DRYAIR DRY
LOW
ENERGY
RINSE
SETTING THE CONTROLS
HIGH
TEMP
WASH
NORMAL
LOW
ENERGY
HEAVY
POTS
-N-
PANS
HIGHHIGH
TEMPTEMP
WASHWASH
LOWLOW
ENERGYENERGY
RINSERINSE
AIR DRYAIR DRY
OPTIONSCYCLES
WASHWASH
LATERLATER
RINSERINSE
CHINACHINA
CRYSTALCRYSTAL
3. If desired, press one or more Option pad(s).
4. Check the detergent dispensers. They
must be filled properly for the new cycle.
To clear the indicators:
Press Cancel/Drain before starting the
dishwasher to clear all cycle and option
selections.
16
SETTING THE CONTROLS
Adding items during a cycle
You can add items to the dishwasher load
anytime the Add-A-Dish
indicator is on.
1. Lift up the door latch to stop the cycle.
Wait for spraying action to stop before
opening the door.
2. Open the door and add the item.
3. Close the door, but do not latch it. Wait
30 seconds for the air in the dishwasher
to warm up. Doing so reduces the
amount of moisture in the vent when
restarting a cycle.
4. Close the door firmly until it latches. The
dishwasher resumes the cycle.
Using the delay wash cycle
Use 4 Hour Delay Start to run the dishwasher during off-peak hours to reduce
energy usage or to reduce daytime heat
buildup in your home.
1. Close door firmly until it latches.
2. Press 4 Hour Delay Start. The pad
indicator will glow red.
3. Press a Cycle pad. The Delay Start
countdown begins when you
press the Cycle pad. If you
don’t press a Cycle pad within
30 seconds, the Delay Start
indicator turns off.
4. If desired, press one or more Option pads.
The 4 Hour Delay Start indicator stays on
until the wash cycle begins.
NOTES:
• Press 4 Hour Delay Start anytime
during the delay period to start
dishwasher immediately.
• Press Cancel/Drain to cancel the delay
cycle. The 4 Hour Delay Start
indicator will turn off. Press new
Cycle and Option pads.
• You can add items to the load anytime
during the delay countdown. After adding
items, close the door firmly until it latches.
The delay countdown will not continue if
the door is not latched.
ADD-A-DISH
4 HOUR4 HOUR
DELAY
START
4 HOUR4 HOUR
DELAY
START
CANCELCANCEL
DRAINDRAIN
17
Understanding the status indicators
Lock Out
The Lock Out feature lets you lock out the
function of the control
pads. When using Lock
Out, you cannot start
the dishwasher.
To use Lock Out:
• Press and hold Air Dry (about 5 seconds)
until the Lock Out indicator glows.
To turn off Lock Out:
• Press and hold Air Dry (about 5 seconds)
until the Lock Out indicator turns off.
Washing
The Washing indicator glows at the start
of the first fill of any cycle
(except Rinse/Wash
Later) and remains
on until the end of the
main wash.
Water Heating
The Water Heating indicator glows when-
ever water is heated
during a cycle.
AIR DRYAIR DRY
WASHING
WATER HEATINGWATER HEATING
Rinsing
The Rinsing indicator glows during the
last two rinses of all
cycles.
Drying
The Drying indicator glows during the
drying portion of each
cycle – even if you select
Air Dry. It turns off at
the end of the cycle. If
dishes are not as dry as you expected when
using Air Dry, either allow longer drying
times (overnight) or do not use Air Dry.
Add-A-Dish
The Add-A-Dish indicator glows as soon
as the dishwasher starts
and keeps glowing until
the main wash portion of
the cycle begins. You
can add an additional item while the indicator is on.
Clean
The Clean indicator glows at the end of a
cycle to show that the
load is clean. All other
indicators turn off. The
Clean indicator glows
until you press Cancel/Drain or any other
control pad.
RINSING
DRYING
CLEAN
ADD-A-DISH
SETTING THE CONTROLS
LOCK OUTLOCK OUT
18
Washing Special Items
If you have any doubts about washing a particular piece of dishware, check with the
manufacturer to see if it is dishwasher safe.
DISHWASHER SAFE?
Yes
No
No
Yes
Yes
No
Yes
No
No
No
Yes
Yes
Yes
No
No
MATERIAL
Aluminum
Bottles
and Cans
Cast Iron
China/
Stoneware
Crystal
Gold
Glass
HollowHandle
Knives
Pewter
Disposable
Plastics
Plastics
Stainless
Steel
Sterling Silver
or Silver Plate
Tin
Wooden
Ware
EXCEPTIONS/SPECIAL INFORMATION
High water temperature and detergents can pit
finish of anodized aluminum.
Wash bottles and cans by hand. Labels attached
with glue can loosen in your dishwasher. Loose
labels and glue can clog spray arms or the pump
and will reduce washing performance.
Seasoning will be removed and iron will rust.
Always check manufacturer’s recommendations
before washing. Antique, hand-painted, or overthe-glaze patterns may fade. Gold leaf can
discolor or fade.
Always check manufacturer’s recommendations
before washing. Some types of leaded crystal
can etch with repeated washings.
Gold-colored flatware will discolor.
Milk glass will yellow with repeated dishwasher
washing.
Handles of some knives are attached to the
blade with adhesives which may loosen if
washed in the dishwasher.
High water temperatures and detergent can
discolor or pit finish.
Cannot withstand high water temperatures
and detergents.
Always check manufacturer’s recommendations
before washing. Plastics vary in their capacity to
withstand high water temperatures and detergents. Load plastics in top rack only.
Run the Rinse/Wash Later cycle if not washing
immediately. Prolonged contact with food
containing salt, vinegar, milk products, or fruit
juice can damage finish.
Run the Rinse/Wash Later cycle if not washing
immediately. Prolonged contact with food
containing salt, acid, or sulfide (eggs, mayonnaise, and seafood) can damage finish.
Can rust.
Always check manufacturer’s recommendations
before washing. Untreated wood can warp,
crack, or lose its finish.
19
Caring for Your Dishwasher
Your new dishwasher is designed to give you many years of dependable service. There
are a few things you can do to maintain your dishwasher properly. This section tells you
how to clean and care for your dishwasher. Refer to the “Solution chart” for special cleaning
problems. See Installation Instructions for information on storing your dishwasher and for
cleaning the drain air gap.
Cleaning the exterior
In most cases, regular use of a soft, damp
cloth or sponge and a mild detergent is all
that is necessary to keep the outside of your
dishwasher nice looking and clean.
Cleaning the interior
Hard water minerals may cause a white film
to build up on the inside surfaces, especially
just beneath the door area.
To clean interior:
• Apply powdered dishwasher detergent to a
damp sponge to make a paste.
OR
• Use liquid automatic dishwasher detergent
and clean with damp sponge.
Do not clean the dishwasher interior until it
has cooled.
Wear rubber gloves. Do not use any type of
cleanser other than dishwasher detergent
because it can cause foaming or sudsing.
NOTE: See “Removing spots and film” in
the “Solving Common Dishwashing Problems” section to clean your dishwasher with
white vinegar. Remember, this procedure is
intended for occasional use only. Vinegar
is an acid. Excessive use can damage your
dishwasher.
Overfill protector
The overfill protector (in the front right corner
of the dishwasher tub) keeps the dishwasher
from overfilling. It must be in place for the
dishwasher to operate.
Check under the float for objects that may
keep the protector from moving up or down.
20
Storing your dishwasher
Moving or winterizing your
dishwasher
Protect your dishwasher and home against
water damage due to freezing water lines. If
your dishwasher is left in a seasonal dwelling or could be exposed to near freezing
temperatures, have a qualified person do
the following:
NOTE: Pump motor styles vary by model.
Refer to Figure 1 or Figure 2, depending on
the style of your dishwasher.
1. Disconnect power supply to the
dishwasher.
2. Turn off water supply to the dishwasher.
3. Remove the 4 screws on the lower
access panel and remove the lower
access panel.
4. Place a shallow pan under the water
supply valve. Then, use a wrench to
disconnect the water inlet from the water
supply valve. Separate the water inlet
from the water supply valve and drain
water into the pan.
5. Remove the spring clamp from the water
outlet and separate from the water
supply valve; drain water into pan.
6. Reconnect both water inlet and water
outlet to the water supply valve.
7. Empty the pan and reposition it under
the water pump.
8. Remove the clamp and disconnect the
drain hose from the water pump; drain
water into pan.
9. Reconnect drain hose to the water
pump, being sure to position the clamp
over the connection.
10. Replace the lower access panel.
CARING FOR YOUR DISHWASHER
Spring
clamp
Drain
hose
Water
inlet
Water outlet
Water supply
valve
Spring
clamp
Water pump
and motor
Drain
hose
Figure 2
Water outlet
Water
inlet
Water supply
valve
Water pump
and motor
Figure 1
21
CARING FOR YOUR DISHWASHER
NOTE: If your dishwasher is connected to
a garbage disposal, do not run water into
the sink after winterizing. This could cause
water to refill the drain hose on your
dishwasher.
Reconnecting your dishwasher
1. Remove the 4 screws on the lower
access panel and remove lower
access panel.
2. Turn on the water supply to dishwasher.
3. Turn on power supply to dishwasher.
4. Run dishwasher through a complete cycle
and check for leaks.
5. Replace lower access panel.
Storing for the summer
Protect your dishwasher during the summer
months by turning off the water supply and
power supply to the dishwasher.
22
Saving Energy
Saving energy is important and helps you save money. This section gives you tips on the
best ways to save energy with your dishwasher.
Loading tips
• Wash full loads. Running a half-filled
dishwasher uses the same amount of
electricity and hot water as a fully loaded
machine.
• Load correctly for best washing results.
Incorrect loading may cause poor washing and the need to rewash all or part
of a load.
Cycle and option tips
• Use the Low Energy cycle whenever
possible. The cycle uses less hot water
and energy than the Normal cycle.
• Use 4 Hour Delay Start to run your dish-
washer during off-peak hours. Local
utilities recommend avoiding heavy usage
of energy at certain times of day.
• Do not use the High Temp Wash option if it
is not needed. When this option is off, if
water entering the dishwasher is lower
than 140°F (60°), the cycle does not take
additional time to heat water during the
main wash. In some cases, loads may not
dry as well when using the High Temp
Wash option.
NOTE: Loads may not wash or dry as well
if the water temperature is too low. For
best dishwashing results, water must be
at least 120°F (49°C) as it enters the
dishwasher.
• Use the Low Energy Rinse option to
turn off the automatic water heating in the
final rinse.
• Use the Air Dry option whenever possible.
Allow longer drying times (overnight). Use
a rinse agent to improve drying.
• Do not prerinse normally soiled dishes.
Select the correct cycle for the load
and use the recommended amount of
detergent.
To check water temperature:
1. Run the hot water at the faucet closest
to your dishwasher. Let
the water run for at least
1 minute.
2. Hold a candy or meat thermometer in the
running stream of water. If
water temperature at the
faucet is below 120°F (49°C),
have a qualified person raise
the water heater’s thermostat
setting.
Loading...