®
30" Slide-in Electric Range
PRODUCT MODEL NUMBERS
GY395LXG RS310PXG
GY395PXG RS315PXG
GY396LXG RS385PXG
GY396PXG RS386PXG
RS395PXG
RS396PXG
Electrical: Connect with 8 gauge copper or 6 gauge aluminum wire. A four-wire or three-wire, single-phase, 120/240-volt, 60-Hz; 40 amp, AC-only, electrical supply (or four-wire or threewire 120/208-volt if specified on the model/serial rating plate) is required on a separate 40 amp circuit, fused on both sides of the line. A timedelay fuse or circuit breaker is recommended. The model/serial rating plate is located on the oven frame behind the storage drawer panel.
OVERALL DIMENSIONS
30-3/4" (78.1 cm) cooktop width
36" (91.4 cm) |
|
cooktop |
22-1/2" |
height with |
(57.1 cm) |
leveling legs lowered 1-1/2 turns
1" (2.5 cm)
30" (76.2 cm) 26-7/8" width (68.2 cm)
depth with handle
COUNTERTOP PREPERATION |
|
CABINET OPENING DIMENSIONS |
The cooktop sides of the slide-in range fit over the cutout edge of your countertop.
If you have a square finish (flat) countertop and the opening width is 30-3/8" (77.2 cm), no countertop preparation is required.
Formed front-edged countertops: Must have molded edge shaved flat 1/4" (0.64 cm) from each front corner of opening.
Tile countertops may need trim cut back 1/4" (0.64 cm) from each front corner and/or rounded edge flattened.
If countertop opening width is greater than
30-3/8" (77.2 cm), adjust the 1/4" (0.64 cm) dimension.
Countertop must be level. Place level on countertop, first side to side; then front to back. If countertop is not level, range will not be level. Oven must be level for satisfactory baking conditions.
30-3/8"
(77.2 cm) opening width
30-7/8"
(78.4 cm)
Cooktop sides of range fit over edges of countertop opening.
1/4" (0.64 cm)
Formed or tiled countertop trimmed 1/4" (0.64 cm) back at front corners of countertop opening.
Cabinet opening dimensions |
|
|
|||
shown are for: |
|
|
|||
25” countertop depth, |
13" (33 cm) max. |
||||
24” base cabinet depth, |
|||||
36” countertop height |
upper cabinet depth |
||||
|
|
|
|
|
|
|
|
|
|
|
30" (76.2 cm) min. cabinet |
|
|
|
|
|
opening width |
|
|
|
|
|
|
|
|
|
|
|
|
|
18" (45.7 cm) |
|
|
||
|
upper cabinet to |
|
|
||
|
countertop |
|
|
||
|
|
|
|
|
|
For minimum clearance to the top of the cooktop, see
NOTE.**
22-15/32" (57.1 cm) opening depth
3/8" (9.5 cm)
|
radius both |
|
|
|
|
|
|
|
|
30-3/8" (77.2 cm) |
|
||||
|
corners |
|
|
|
|||
|
|
|
|
|
opening width |
|
|
4" (10.2 cm) min. |
|
|
|
|
|
|
|
|
|
|
|
|
|||
clearance from |
|
|
|
|
|
|
|
|
junction box – |
|
|||||
both sides of range |
|
|
8" (20.3 cm) to |
|
|||
to side wall or |
|
|
22" (55.9 cm) from |
|
|||
other combustible |
|
|
either cabinet, |
|
|||
material between |
|
|
7" (17.8 cm) max. |
|
|||
upper cabinet and |
|
|
from floor. |
|
|||
countertop. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
7/8" (2.2 cm) min. |
|
|||
|
|
|
required between |
|
|
||
|
|
|
cutout and cabinet |
|
|
||
|
|
|
door or hinge. |
|
|
||
|
|
|
|
|
|
|
|
**NOTE: 24" min. when bottom of wood or metal cabinet is protected by not less than 1/4" flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" stainless steel, 0.024" aluminum or 0.020" copper.
30" min. clearance between the top of the cooking platform and the bottom of an unprotected wood or metal cabinet.
Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation |
Ref. 9757985 |
Instructions packed with product. Specifications subject to change without notice. |
11-11-03 |