Whirlpool RF378PXG, RF377PXG User Manual

0 (0)
4.65 Cubic Foot Oven
MODELS RF377PXG RF378PXG
8053400
A Note to You ............2
Range Safety..............3
Parts and Features....6
Using Your Range ......8
Using the Self-
Cleaning Cycle ........29
Caring for Your
Troubleshooting ......40
Requesting Assistance or
Warranty ..................44
1-800-253-1301
Call our Consumer Assistance Center
with questions or comments.
Self-Cleaning
Electric Ranges
2
1-800-253-1301
Our Consumer Assistance Center number is toll free.
To find detailed product information, the location of the nearest Whirlpool dealer or authorized servicer, to
purchase an accessory item, or register your appliance on-line, please visit our Web site at
www.whirlpool.com

A NOTE TO YOU

Thank you for buying a WHIRLPOOL®appliance.
The Whirlpool Brand is committed to designing quality products that consistently perform for you to make your life easier. To ensure that you enjoy years of trouble-free operation, we developed this Use and Care Guide. It is full of valuable information about how to operate and maintain your appliance properly and safely. Please read it carefully.
Also, please complete and mail the Product Registration Card provided with your appliance. The card helps us notify you about any new information on your appliance.
Please record your model’s information.
Whenever you call to request service for your appliance, you need to know your complete model number and serial number. You can find this information on the model and serial number label/plate (see diagram in the “Parts and Features” section).
Please also record the purchase date of your appliance
and your dealer’s name, address, and telephone number.
Keep this book and the sales slip together in a safe place for future reference. It is important for you to save your sales receipt showing the date of purchase. Proof of purchase will assure you of in-warranty service.
Model Number Serial Number Purchase Date Dealer Name Dealer Address Dealer Phone
3

RANGE SAFETY

continued on next page
You will be killed or seriously injured if you don’t follow instructions.
You can be killed or seriously injured if you don’t follow instructions.
Your safety and the safety of others is very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol. This symbol alerts you to hazards that can kill or hurt you and others. All safety messages will be preceded by the safety alert symbol and the word “DANGER” or
“WARNING.” These words mean:
wDANGER
wWARNING
All safety messages will identify the hazard, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
Tip Over Hazard A child or adult can tip the range and be killed. Connect anti-tip bracket to rear range foot. Reconnect the anti-tip bracket, if the range is moved. See the installation instructions for details. Failure to follow these instructions can result in death or serious burns
to children and adults.
Making sure the anti-tip bracket is installed:
Slide range forward.
Look for the anti-tip bracket securely attached to floor.
Slide range back so rear range foot is under anti-tip bracket.
Anti-Tip Bracket
Range Foot
wWARNING
4
RANGE SAFETY
WARNING: To reduce the risk of fire, electrical
shock, injury to persons, or damage when using the range, follow basic precautions, including the following:
WARNING – TO REDUCE THE RISK OF TIP-
PING OF THE RANGE, THE RANGE MUST BE SECURED BY PROPERLY INSTALLED ANTI-TIP DEVICES. TO CHECK IF THE DEVICES ARE INSTALLED PROPERLY, SLIDE RANGE FORWARD, LOOK FOR ANTI-TIP BRACKET SECURELY ATTACHED TO FLOOR, AND SLIDE RANGE BACK SO REAR RANGE FOOT IS UNDER ANTI-TIP BRACKET.
CAUTION – Do not store items of interest to
children in cabinets above a range or on the backguard of a range – children climbing on the range to reach items could be seriously injured.
Proper Installation – Be sure the range is properly installed and grounded by a qualified technician.
Never Use the Range for Warming or Heating the Room.
Do Not Leave Children Alone – Children should not be left alone or unattended in area where the range is in use. They should never be allowed to sit or stand on any part of the range.
Wear Proper Apparel – Loose-fitting or hanging garments should never be worn while using the range.
User Servicing – Do not repair or replace any part of the range unless specifically recommended in the manual. All other servicing should be referred to a qualified technician.
Storage in or on the Range – Flammable materials should not be stored in an oven or near surface units.
Do Not Use Water on Grease Fires – Smother fire or flame or use dry chemical or foam-type extinguisher.
Use Only Dry Potholders – Moist or damp potholders on hot surfaces may result in burns from steam. Do not let potholder touch hot heating elements. Do not use a towel or other bulky cloth.
IMPORTANT SAFETY INSTRUCTIONS
DO NOT TOUCH SURFACE UNITS OR AREAS NEAR UNITS – Surface units may be hot even though they are dark in color. Areas near surface units may become hot enough to cause burns. During and after use, do not touch, or let clothing or other flammable materials contact surface units or areas near units until they have had suffi­cient time to cool. Among those areas are the cook-top and surfaces facing the cook-top.
Use Proper Pan Size – The range is equipped with one or more surface units of different size. Select utensils having flat bottoms large enough to cover the surface unit heating element. The use of undersized utensils will expose a portion of the heating element to direct contact and may result in ignition of clothing. Proper relationship of utensil to burner will also improve efficiency.
Never Leave Surface Units Unattended at High Heat Settings – Boilover causes smoking and greasy spillovers that may ignite.
Make Sure Reflector Pans or Drip Bowls Are in Place – Absence of these pans or bowls during cooking may subject wiring or components underneath to damage.
Protective Liners – Do not use aluminum foil to line surface unit drip bowls or oven bottoms, except as suggested in the manual. Improper in­stallation of these liners may result in a risk of electric shock, or fire.
Glazed Cooking Utensils – Only certain types of glass, glass/ceramic, ceramic, earthenware, or other glazed utensils are suitable for range-top service without breaking due to the sudden change in temperature.
Utensil Handles Should Be Turned Inward and Not Extend Over Adjacent Surface Units – To reduce the risk of burns, ignition of flammable materials, and spillage due to unintentional contact with the utensil, the handle of a utensil should be positioned so that it is turned inward, and does not extend over adjacent surface units.
Do Not Soak Removable Heating Elements – Heating elements should never be immersed in water.
– SAVE THESE INSTRUCTIONS –
5
RANGE SAFETY
IMPORTANT SAFETY INSTRUCTIONS
Do Not Cook on Broken Cook-Top – If cook-top should break, cleaning solutions and spillovers may penetrate the broken cook-top and create a risk of electric shock. Contact a qualified techni­cian immediately.
Clean Cook-Top With Caution – If a wet sponge or cloth is used to wipe spills on a hot cooking area, be careful to avoid steam burn. Some cleaners can produce noxious fumes if applied to a hot surface.
Use Care When Opening Door – Let hot air or steam escape before removing or replacing food.
Do Not Heat Unopened Food Containers – Build-up of pressure may cause container to burst and result in injury.
Keep Oven Vent Ducts Unobstructed.
Placement of Oven Racks – Always place oven racks in desired location while oven is cool. If rack must be moved while oven is hot, do not let potholder contact hot heating element in oven.
DO NOT TOUCH HEATING ELEMENTS OR INTERIOR SURFACES OF OVEN – Heating elements may be hot even though they are dark in color. Interior surfaces of an oven become hot enough to cause burns. During and after use, do not touch, or let clothing or other flammable materials contact heating elements or interior surfaces of oven until they have had sufficient time to cool. Other surfaces of the appliance may become hot enough to cause burns – among these surfaces are oven vent openings and surfaces near these openings, oven doors, and windows of oven doors.
– SAVE THESE INSTRUCTIONS –
For self-cleaning ranges –
Do Not Clean Door Gasket – The door gasket is essential for a good seal. Care should be taken not to rub, damage, or move the gasket.
Do Not Use Oven Cleaners – No commercial oven cleaner or oven liner protective coating of any kind should be used in or around any part of the oven.
Clean Only Parts Listed in Manual.
Before Self-Cleaning the Oven – Remove broiler pan and other utensils.
For units with ventilating hood –
Clean Ventilating Hoods Frequently – Grease should not be allowed to accumulate on hood or filter.
When flaming foods under the hood, turn the fan off. The fan, if operating, may spread the flame.
PUSH TO TURN
PUSH TO TURN
LO
2
3
4
5
6
7
8
HI
LO
2
3
4
5
6
7
8
HI
LO
2
3
4
5
6
7
8
HI
LO
2
3
4
5
6
7
8
HI
OFF
OFF
OFF
OFF
COOK TIME/COOK TIME/
TIMED
BAKE BROIL HEAT
CLEAN
ON
START TIME/ART TIME/
DELAY
OFF
CANCEL
START
5 SEC
ENTER
TIME
DOOR
LOCKED
AUTO CLEAN
CUSTOM
BROIL
SELF CLEANING OVEN CLEANING OVEN
TIMER
START?
CLOCK
TIMER
• • CANCEL• • CANCEL
START TIME
COOK
TIME
BAKE
6
COOK TIME/
TIMED
BAKE BROIL HEAT
CLEAN
ON
START TIME/
DELAY
OFF
CANCEL
START
5 SEC
ENTER
TIME
DOOR
LOCKED
BAKE
AUTO
CLEAN
CUSTOM
BROIL
SELF CLEANING OVEN CLEANING OVEN
TIMER
START?
CLOCK
TIMER
• • CANCEL
START
TIME
COOK
TIME
Left rear control knob
Left front control knob
Right rear control knob
Right front control knob
Surface heating indicator light
(lights up when a coil element is on)
Coil element marker
(shows which coil element you are setting)
Electronic oven control
Oven vent
(p. 27)
Plug-in coil element with one-piece reflector bowl
(pp. 32, 35-36)
Anti-tip bracket
(p. 28)
Door stop clip
(pp. 38, 39)
Model and serial number plate
(behind left side of storage drawer)
Removable storage drawer
(p. 28)
(Model RF377PXG)
Electronic
oven control
(pp. 14-16)
Manual oven
light switch
(p.39)
Control panel
(pp. 6, 32)
Automatic oven
light switch
(p. 39)
Gasket
(p. 29)
Broil element
(not shown)
(p. 22)
Bake element
(p. 19)
CONTROL PANEL

PARTS AND FEATURES

7
PUSH TO TURN
PUSH TO TURN
LO
2
3
4
5
6
7
8
HI
LO
2
3
4
5
6
7
8
HI
LO
2
3
4
5
6
7
8
HI
LO
2
3
4
5
6
7
8
HI
OFF
OFF
OFF
OFF
HOT SURFACEHOT SURFACE
Electronic
oven control
(pp. 14-16)
Manual oven
light switch
(p. 39)
Control panel
(pp. 7, 32)
Automatic oven
light switch
(p. 39)
Gasket
(p. 29)
Hot surface
indicator
lights
(p. 11)
Broil element
(not shown)
(p. 22)
Bake element
(p. 19)
(Model RF378PXG)
Oven vent
(p. 27)
CLEANTOP
®
ceramic glass cooktop
(pp. 11, 32, 34)
Surface cooking area
(pp. 9-11)
Anti-tip bracket
(p. 28)
Door stop clip
(pp. 38, 39)
Model and serial number plate
(behind left side of storage drawer)
Removable storage drawer
(p. 28)
PARTS AND FEATURES
CONTROL PANEL
COOK TIME/
TIMED
BAKE BROIL HEAT
CLEAN
ON
START TIME/
DELAY
OFF
CANCEL
START
5 SEC
ENTER
TIME
DOOR
LOCKED
BAKE
AUTO
CLEAN
CUSTOM
BROIL
SELF CLEANING OVEN CLEANING OVEN
TIMER
START?
CLOCK
TIMER
• • CANCEL
START
TIME
COOK
TIME
Left rear control knob
Left front control knob
Right rear control knob
Right front control knob
Surface heating indicator light
(lights up when a surface cooking area is on)
Surface cooking area marker
(shows which surface cooking area you are setting)
Electronic oven control
88
Using the control knobs
Push in the control knobs before turning them to a
setting. You can set them anywhere between HI and OFF.
Surface cooking area heat settings
Use the following chart as a guide.
Fire Hazard Turn off all controls when done cooking. Failure to do so can result in death or fire.
RECOMMENDED USE
To start food cooking.
To bring liquid to a boil.
To hold a boil.
To quickly brown or sear food.
To maintain a slow boil.
To fry poultry or meat.
To make pudding, sauce, or gravy.
To stew or steam food.
To simmer food.
To keep food warm.
SETTING HI
6-8
5
2-4
LO

USING THE SURFACE COOKING AREAS

wWARNING

USING YOUR RANGE

Easy ways to save energy
To help shorten your cooking time, use the least
amount of liquid possible.
Preheat your pots and pans only when
recommended and for the shortest time possible.
Start your food on a higher heat setting, then turn
the control to a lower setting to finish cooking.
9
USING THE SURFACE COOKING AREAS (CONT.)
USING YOUR RANGE
Home canning information
To protect your range:
Use flat-bottomed canners on all types of
cooktops, especially ceramic glass. Canners with rippled or ridged bottoms do not allow good contact with the surface.
• Center the canner over the largest surface cook­ing area. Do not extend more than one inch
outside the surface cooking area. Large diameter canners/pans, if not centered correctly, trap heat and can cause dam­age to the cooktop.
Do not place your canner on two surface cooking
areas at the same time.
The type of material the canner is made of deter­mines the length of heating time. Refer to the “Characteristics of cookware materials” chart later in this section for more information.
When canning for long periods of time, allow elements and the surrounding surfaces to cool down.
1" 1"
Pan
Surface cooking area
Alternate use of the surface cooking areas between batches or prepare small batches at a time.
Start with hot water, cover with a lid, and bring to a boil; then reduce heat to maintain a boil or required pressure levels in a pressure canner.
On coil element model, keep your reflector bowls clean so that they will always reflect heat well.
For up-to-date information on canning, contact your local U.S. Government Agricultural Depart­ment Extension Office or companies who manufacture home canning products.
Optional canning kit
(Coil element model)
Most water-bath or pressure canners have large diameters. If you do canning with them at high heat settings for long periods of time, you can shorten the life of regular coil elements. This can also damage the cooktop. If you plan to use the cooktop for canning, we recommend the installa­tion of a Canning Kit. Order the kit (Part No.
242905) from your dealer or authorized service company.
continued on next page
10
Cookware tips
USING THE SURFACE COOKING AREAS (CONT.)

CHARACTERISTICS OF COOKWARE MATERIALS

USING YOUR RANGE
Select a pan that is about the same size as the
surface cooking area. Cookware should not extend more than 1 inch (2.5 cm) outside the area.
For best results and greater energy efficiency,
use only flat-bottomed cookware that makes good contact with the surface cooking area. Cookware with rounded, warped, ribbed (such as some porcelain enamelware), or dented bottoms could cause uneven heating and poor cooking results.
Cookware designed with slightly indented bot-
toms or small expansion channels can be used.
Cookware with a non-stick finish has heating
characteristics of the base material.
Check for rough spots on the bottom of metal or
glass cookware which will scratch the ceramic glass surface.
Use flat bottom cookware for best heat
conduction from the surface cooking area to the cookware. Determine flatness with the ruler test. Place the edge of a ruler across the bottom of the cookware. Hold it up to the light. No light should be visible under the ruler. Rotate the ruler in all directions and look for any light.
Do not leave empty cookware, or cookware which
has boiled dry, on a hot surface cooking area. The cookware could overheat, causing damage to the cookware or the surface cooking area.
The pan material affects how fast heat transfers from the surface cooking area through the p an material and how evenly heat spr eads over the pan bot tom. Choo se pans that provide the best cooking results.
Aluminum
Cast iron
Ceramic or ceramic glass
Copper
Earthenware
Porcelain enamel-on-steel or enamel-on-cast iron
Stainless steel
• Heats quickly and evenly.
• Use for all types of cooking.
• Medium or heavy thickness is best for most cooking.
• Used as a core or base in cookware to provide even heating.
• Heats slowly and evenly.
• Good for browning and frying.
• Maintains heat for slow cooking.
• Can be coated with porcelain enamel.
• Heats s low ly a nd uneve nly.
• Use on low to medium settings.
• Follow manufacturer’s instructions.
• Heats very quickly and evenly.
• Used as a core or base in cookware to provide even heating.
• Can be used for cooktop cooking if recommended by the manufacturer.
• Use on low settings.
• See cast iron and stainless steel.
• Heats q uick ly b ut une ve nly.
A core or base of aluminum or copper on the cookware provides
even heating.
• Can be coated with porcelain enamel.
11
Using the ceramic glass cooktop
(Model RF378PXG)
Cooking on the ceramic glass cooktop is similar
to cooking on coil elements. There are, however, a few differences:
The surface cooking area will glow red when the element is turned on. You will see the element cycling on and off – even on the HI setting – to help the
area stay at the temperature setting you chose.
Do not cook foods directly on the cooktop.
Do not cook popcorn that comes in prepackaged aluminum containers on the cooktop. The container could leave aluminum marks on the cooktop that cannot be removed completely.
Make sure the bottoms of pots and pans are clean and dry before using them. Food and water particles left on the bottoms can leave deposits on the cooktop when it is heated.
Hot surface indicator lights
(Model RF378PXG)
One of the hot surface indicator lights on the
cooktop will glow when a surface cooking area becomes too hot to touch. The indicator light will continue to glow as long as the surface cooking area is too hot to touch, even after it is turned off.
USING YOUR RANGE
USING THE SURFACE COOKING AREAS (CONT.)
HOT SURFACEHOT SURFACE
Lift pots and pans onto and off of the cooktop. Sliding pots and pans on the cooktop could leave marks that are difficult to remove or could leave permanent marks.
Dropping a heavy or hard object on the cooktop could crack it. Be careful when using heavy skillets and large pots. Do not store jars or cans above the cooktop.
Do not use the cooktop as a cutting board.
Do not allow anything that could melt, such as plastic, to come in contact with the cooktop while it is hot.
Sugary spills and soils can cause pitting. See “Cleaning the ceramic glass cooktop” in the “Caring for Your Range” section for more information.
Wiping off the cooktop before and after each use will help keep the surface free from stains and give you the most even heating. See “Cleaning the ceramic glass cooktop” in the “Caring for Your Range” section for care and cleaning suggestions.
HOT SURFACE
12
USING YOUR RANGE

USING THE OVEN

Positioning racks and pans
Place the oven racks where you need them before turning on the oven.
To move a rack, pull it out to the stop position, raise the front edge and lift it out.
Be sure the rack(s) is level.
Use pot holders or oven mitts to protect your hands if rack(s) must be moved while the oven is hot.
For best performance, cook on one rack. Place the rack so the top of the food will be centered in the oven.
When cooking with two racks, arrange the racks on the 2nd and 4th rack guides.Two sheets of cookies may be baked if sheets are switched at ap­proximately three quarters of the total bake time. Increase baking time, if necessary.
For best results allow 2 inches of space around each pan and between pans and oven walls.
Hot air must circulate around the pans in the oven for even heat to reach all parts of the oven. This results in better baking.
Where to place pans:
WHEN YOU HAVE
1 pan 2 pans
3 or 4 pans
PLACE
In center of the oven rack. Side by side or slightly
staggered. In opposite corners on
each oven rack. Stagger pans so no pan is directly over another.
Rack placement for specific foods:
FOOD
Frozen pies, large roasts, turkeys, angel food cakes
Bundt cakes, most quick breads, yeast breads, casseroles, meats
Cookies, biscuits, muffins, cakes, nonfrozen pies
RACK POSITION
1st or 2nd rack guide from bottom
2nd rack guide from bottom
2nd or 3rd rack guide from bottom
NOTE: For information on where to place your rack when broiling, see “Broiling guidelines” later in this section.
13
USING YOUR RANGE

BAKEWARE CHOICES

Baking performance is affected by the type of bakeware used. Use the bakeware size recommended in the recipe.
BAKEWARE TYPE
Light color ed aluminum
• Light golden crusts
• Even browning
• Use temperature and time recommended in recipe.
Dark aluminum and other bakeware with dark, dull, and/or non-stick finish
• Brown, crisp crusts
• May reduce baking temperature 25°F.
• Use suggest ed baking time.
• Use temperature and time recommended in recipe for pies, breads, and casseroles.
• Place rack in center of oven.
Ovenproof glassware, ceramic glass, or ceramic
• Brown, crisp crusts
• May reduce baking temperature 25°F.
Insulated cookie sheets or baking pans
• Little or no bottom browning • Place in the bottom third of oven.
• May need to increase baking time.
Stainless steel • May need to increase baking time.
• Crisp crusts
Stoneware
• Follow manufacturer's instructions.
• Light, golde n crusts
• Uneven browning
BEST USED FOR
GUIDELINES
Use aluminum foil to catch spillovers from pies or
casseroles by placing foil on the oven rack below. Foil should be turned up at edges and be at least 1 inch larger than dish.
Do not cover the entire rack with aluminum foil. It will reduce air circula­tion and give you poor cooking results.
Do not line the oven bottom with foil or other liners. It could affect the oven surface as well as the quality of your baking.
Place tent-shaped foil loosely over meat or poultry to slow down surface browning for long term roasting. Remove foil for the last 30 minutes.
Use narrow strips of foil to shield piecrust edges if browning too quickly.

USING ALUMINUM FOIL

14
USING YOUR RANGE
COOK TIME/
TIMED
BAKE BROIL HEAT
CLEAN
ON
START TIME/
DELAY
OFF
CANCEL
START
5 SEC
ENTER
TIME
DOOR
LOCKED
BAKE
AUTO
CLEAN
CUSTOM
BROIL
SELF CLEANING OVEN
TIMER
START?
CLOCK
TIMER
• • CANCEL
START
TIME
COOK
TIME

THE ELECTRONIC OVEN CONTROL

Off/cancel pad
(p. 16)
Start/enter pad
(p. 16)
Clock/timer pad
(p. 15)
Bake pad
(p. 17)
Start time/Cook time pad
(pp. 24, 26)
Electronic display
Display/clock
When you first plug in the range, “PF” will appear on the display until you press any command pad. If “PF” again appears on the display, your electricity was off for a while.
When you are using the oven, the display will show preheat times and temperature settings.
When you are not using the oven, the display shows the time of day.
When showing the time of day, the display will show the hour and minutes.
When you are using the minute timer, the display will count down each minute.
When setting a function, if you do not press START/ENTER within 5 seconds, the Start? indicator light will flash. If you do not press START/ENTER within 5 minutes, the function will be canceled.
When you are using COOK TIME, the display
will show hours and minutes or minutes and seconds.
Indicator lights
An indicator light to the left of the display lights up when you are in a setting. An indicator light on the display lights up when the oven is on.
Using the control lock
The control lock lets you disable the control panel command pads. The control lock comes in handy when you want to prevent others from using the oven.
NOTES:
You can only use the control lock when the oven is not in use or the control has not been set.
Set the control lock when cleaning the control panel to prevent yourself from accidentally turning on the oven.
To lock the control panel:
Press and hold START/ENTER for 5 seconds. You
will hear a single tone and “Loc” will appear on the temperature display for 5 seconds. “Loc” will then appear whenever a command pad is pressed.
To unlock the control panel:
Press and hold START/ENTER for 5 seconds.
You will hear a single tone and “Loc” will disappear from the temperature display.
START
5 SEC
ENTER
Temperature/ time pad
(pp. 15, 17, 20, 22, 24, 30)
Auto clean pad
(p. 30)
Custom broil pad
(p. 22)
Indicator lights
(see below )
COOK
TIME
START
5 SEC
ENTER
Loading...
+ 30 hidden pages