Whirlpool RD 502 INSTRUCTION FOR USE

(1)Programme duration

figures (guideline) are valid for maximum temperature wash with no special functions.

RD 502

Programmes Programme Selector 1/2 Charge Half Load Option

PROGRAMME TABLE

Lavange

Intensive Wash Option

Renforcé Marche/

On/Off

Arrêt

Programme Type of fabrics / Degree of soiling / Notes Max.

Cotton with Prewash

Prélavage

Cotton

Coton

Coloured

Couleurs

Synthetics

Synthétiques

Rinse + Spin

Rinçage

Spin

Essorage

Delicate

Fragile

Wool

Laine

Rinse + Spin

Rinçage

Spin

Essorage

Drain

Vidange

Heavily soiled sheets, tablecloths, underclothes, shirts etc. in hard wearing and high temperature resis tant cotton. The maximum load for heavily soiled washing is 3.5 kg.

Moderately soiled sheets, tablecloths, underclothes, towels etc. in hard wearing and high temperature resistant cotton.

Averagely soiled blouses, shirts etc. made of polyester (Diolen, Trevira); polyamide (Perlon, Nylon), or cotton blends.

Lightly soiled shirts, blouses etc., made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or cotton blends.

This programme allows starch or softener to be added. It is followed by an intensive spin cycle.

Programme for intensive spin cycle. 5.0

Delicate fabrics and curtains (dresses, skirts, shirts, blouses, etc.). 1.5

Machine washable woollens with pure new wool label. 1.0 This programme allows starch or softener to be added.

It is followed by a gentle spin cycle. Programme for gentle spin cycle. 1.5

Drain only, without spin cycle.

Load

5.0 Yes Yes

5.0

2.0

5.0

1.5

—— —

Detergent and Additives Options Temperature

Pre-

wash

Washing Softener Bleach Half Load Intensive

—

——

—— —— — — —

—

——

Yes

Wash

❉❉ ❉ ❉ ❉❉ ❉ ❉

❉ ❉ ❉

—

—— —

—— — —

—— — — —

❉ ❉ ❉

Maximum

Spin Speed

°C

60/90* 500 130

60/90* 500 115

—

60 500 90

40 500 70

Cold 500 20

40 500 55

40 500 45

Cold 500 15

rpm/min

500 10

500 5

Programme

time

approx.

min (1)

* For obtaining the 90° C temperature, press the “Intensive Wash” option button.

N.B.: The excess of detergent in the dispenser could cause technical problems.

5019 100 01007

ENERGY AND WATER CONSUMPTION DATA

Programme Temperature

(°C)

Cotton + Intensive Wash 90 5.0 72 1.80 115

Cotton 60 5.0 70 1.15 115

Coloured 60 2.0 66 0.80 90

Synthetics 40 2.0 66 0.35 70

Delicate 40 1.5 70 0.65 55

Wool 40 1.0 70 0.55 45

Programmes with prewash last about 15 minutes more than programmes without prewash. Water and energy consumption values were measured in standard conditions in compliance with the Standard IEC 60 456. Individual consumption may vary in comparison with the values specified in the table, because of differences in supply water pressure and temperature, the load and the type of wash.

Load

(kg)

Water

(l)

Energy

(kWh)

Programme

time

(min)

ADDING DETERGENT AND ADDITIVES

Pour the detergent and additives into the respective compartments as follows:

• Programme with pre and main wash

• Main wash programme without prewash

• Fabric softeners and starch

• Bleach

• Stain removers

• Anti-scale agents (water hardness 4)

Important Note:

• Do not fill beyond the “

MAX”

level mark.

• For programme with prewash: do not use liquid detergent.

• For programmes without prewash from cold to 40° C, it is recommended to use a liquid detergent to avoid whitish residues on the coloured laundry.

CLOSE THE DOOR AND SELECT THE PROGRAMME

• Turn the

programme selector knob

clockwise to the desired programme.

PRESS ANY DESIRED OPTION BUTTON(S)

“Half Load” button

• Reduces the water consumption in the “Cotton” and “Synthetics” programmes especially during the prewash and the rinse.

• Especially suitable for lightly soiled or small loads (reduce the quantity of detergent).

• Not suitable for high temperature programmes.

“Intensive Wash” button

• This option allows to put up the washing temperaure to 90° C instead of 60° C for the “Cotton” programmes.

• Especially suitable for heavily soiled laundry.

PROGRAMME START

Open the water inlet tap and press the On/Off button. The pilot lamp lights up.

DOOR LOCK

During the running programme, the door cannot be opened. The door locks automatically in all programmes. If the programme is stopped or if an electrical power failure occurs, the door unlocks automatically after about 1 minute.

PROGRAMME END

• The programme selector knob is at “STOP”.

1. Press the On/Off button. The pilot light goes out.

2. Cancel the options by pressing the appropriate buttons.

3. Turn the water supply tap off.

4. Wait for the door to unlock (about 1 minute).

5. Open the door and the drum flaps and unload the machine.

SELECTING A NEW PROGRAMME, SPIN SPEED, OPTIONS AFTER PROGRAMME START

1. Press the On/Off button to switch off the appliance. The pilot light goes out.

2. Select the new programme and options.

3. Press the On/Off button to switch on the appliance. The pilot light lights.

TO STOP, RESET A PROGRAMME BEFORE THE END

1. Press the On/Off button to switch off the appliance. The pilot light goes out.

2. Set the programme selector on “Drain”.

3. Press the On/Off button to start the “Drain” programme. Only open the door when the programme selector is at “STOP” and the door is

unlocked (after approximately 1 minute).

5019 100 01007