PL46
6GB33063.fm Page 11 Monday, April 14, 2003 3:06 PM
ISTRUCTIONS FOR USE
PRODUCT DESCRIPTION
REPLACING BULBS
BEFORE USING THE REFRIGERATOR
SAFEGUARDING THE ENVIRONMENT
PRECAUTIONS AND GENERAL
RECOMMENDATIONS
HOW TO OPERATE THE REFRIGERATOR
COMPARTMENT
HOW TO DEFROST THE REFRIGERATOR
CARE AND MAINTENANCE
TROUBLESHOOTING GUIDE
AFTER-SALES SERVICE
INSTALLATION
ELECTRICAL CONNECTION
11
6GB33063.fm Page 12 Monday, April 14, 2003 3:06 PM
PRODUCT DESCRIPTION
A Low temperature compartment
B Low temperature compartment door
C Water collection tray
D Adjustable shelves and grids
E Crisper drawer
F Temperature adjustment thermostat
REPLACING BULBS
Replacing bulbs
1.
Press as shown in the figure.
2.
Pull towards the inside of the appliance.
3.
Replace the bulb (max 15W).
G Rating plate (at the side of the cripser
drawer)
H Adjustable foot
I Door seal spacers for transport purposes
(remove and discard)
12
6GB33063.fm Page 13 Monday, April 14, 2003 3:06 PM
BEFORE USING THE REFRIGERATOR
Your new appliance is exclusively for domestic
use.
low temperature compartment
The
used to make ice cubes.
Defrosting is a manual or semi-automatic
procedure
is designed for the storage of fresh food and
beverages.
To get the most out of your new appliance,
read the user handbook thoroughly. The
handbook contains a description of the
appliance and useful tips for storing food.
Discard the door seal spacer shown at point I of
the figure.
refrigerator compartment
. The
can be
Keep this handbook for future consultation.
After unpacking the appliance, make sure that
the door shuts properly. Any damage must be
reported to your dealer within 24 hours after
delivery of the appliance.
Wait at least two hours before connecting
the appliance to the power supply in order
to ensure the refrigerant circuit is fully
efficient.
Installation of the appliance and electrical
connections must be carried out by a qualified
electrician, in accordance with the
manufacturer's instructions and local
regulations.
SAFEGUARDING THE ENVIRONMENT
1. Packing
The packaging material is entirely recyclable, and
marked with the recycling symbol.
Follow local regulations for scrapping.
Keep the packaging materials (plastic bags,
polystyrene parts, etc.) out of reach of children, as
they are potentially dangerous.
2. Appliance
The appliance is made using recyclable materials.
Disposal must be carried out in accordance with
local environmental regulations for waste disposal.
Make the appliance unusable by cutting off the
power cord. The appliance must be delivered to an
authorised collection centre for the recovery of
refrigerant gas.
Information:
This appliance does not contain CFCs (replaced
with R134a) or HFCs (replaced with R600a -
Isobutane). For more information, refer to the
identification data plate affixed to the appliance.
Appliances with Isobutane (R600a)
Isobutane is a natural gas with low environmental
impact. Caution is required, however, since
isobutane is flammable. Therefore, it is essential to
ensure that refrigerant pipelines are not damaged.
PRECAUTIONS AND GENERAL
RECOMMENDATIONS
refrigerator compartment
Use the
storing fresh foods and the
compartment
Do not cover or obstruct the air vents of the
appliance.
Do not store liquids in glass containers in the
low temperature compartment - risk of
bursting.
Do not eat ice cubes or ice lollies immediately
after taking them out of the low temperature
compartment - risk of cold burns.
only for making ice cubes.
low temperature
only for
Do not allow children to play or hide inside the
appliance - risk of becoming trapped and
suffocating.
Before servicing or cleaning the appliance,
unplug it from the mains or disconnect the
electrical power supply.
The power cable may only be replaced by an
authorised person.
Declaration of conformity
This appliance is intended to come into contact
with foodstuffs and conforms to D.L. 108 of
25.01.1992 (European Directive 89/109/EEC).
13
Loading...