Whirlpool PDSI 5081 W, PDSI 5081 A, PDSI 5081 X PROGRAM CHART

GB
Before using the dishwasher, read the installation and maintenance instructions carefully!
PDSI 5081
1. OVERVIEW
Programme selector
START button The indicator lights up during operation, flashes when a fault occurs and goes off at the end of the programme. START BUTTON RESET FUNCTION: Press this button for at least 2 seconds and the started programme and the extra functions selected are cancelled. Main failure displays (repeated flashing of the START indicator lamp) can be cancelled by RESETTING. Detailed instructions are given in chapter 5 “What to do if...”.
Salt level indicator and rinse aid level indicator These indicator lamps light up when salt or rinse aid need to be added. Only add just before starting a wash cycle.
Delayed start button Press the button repeatedly to delay the start of the programme by 3, 6 or 9 hours. Then press the START button. The wash programme will start after the set time.
On/Off button
Programme progress indicator
Table 1.1.
Programme Table
cold
45°C
Available
options
P
1
2
Programmes
Pre-Rinse
Quickwash
Description of programme large small Litres kWh Minutes
Crockery to be washed later. 4.0 0.03 14 ±
Lightly soiled crockery, with no dried-on food.
Detergent
dispenser
X 11.0 0.80 30 ±
Consumption
1)
1)
1)
2)
3
4
5
1) Programme data obtained in conformity with European standard EN 50242. The data may vary, for example, according to different loads, extra functions, sensor settings (only with sensor programmes), water supply temperatures, water hardness and power supply voltage.
Eco
Intensive
Half Load
50°C
70°C
50°C
Normally soiled crockery. Energy Saving Programme.
Recommended programme for heavily soiled crockery, particularly suitable for pots and pans.
Ideal for washing a half load of lightly or normally soiled crockery.
X X 13.0 1.05 165 ±
X X 14.0 1.55 155 ±
X X 10.0 1.04 145 ±
for detailed information on the
5019 696 01013
1)
1)
1)
1
Loading...