Whirlpool OVU B00 PRODUCT DESCRIPTION SHEET

OVU B00 PRODUCT DESCRIPTION SHEET
FI
DE AT NL PT ES BE IT PL CZ SK HU RU SE NO DK
1.
Control panel
2.
3.
Upper heating element
4.
Grill element (can be lowered)
5.
Rear oven lamp
6.
Top shelf
Bottom shelf
Baking tray: Wire Shelf:
ACCESSORIES
Fan
7.
Lower heating element (hidden)
8.
Oven cool door
Drip tray:
Oven function chart
Function Description of function
0OVEN OFF
LAMP
STATIC
PASTRY/FAN
GRILL
TURBO GRILL
-
• To switch on the oven light.
• To cook meat, fish and chicken on the same level.
• Preheat the oven to the required cooking temperature and place the food inside as soon as the red thermostat L.E.D. switches off.
• Ideally, the second or third shelf shelf should be used.
• To cook on up to two different shelf levels.
• If necessary, switch the positions of the dishes to cook food more evenly.
• It is not necessary to preheat the oven (except for pizzas and focaccias).
• To grill steak, kebabs and sausages, to cook vegetables au gratin and to toast bread.
• Preheat the oven for 3 - 5 min.
• The oven door must be kept closed during the cooking cycle.
• When cooking meat, pour a little water into the drip tray (on the bottom shelf) to reduce smoke and fat spatters.
• Ideally the meat should be turned during cooking.
• To grill large joints of meat (roast beef and other roast meats).
• The oven door must be kept closed during the cooking cycle.
• When cooking meat, to avoid spatters of fat and smoke, pour a little water into the drip tray.
• Turn the meat during grilling.
1
1. Selector knob
2. Thermostat knob
3. Red oven thermostat led
4. Cooking time selector knob
CONTROL PANEL
DEFROSTING
• Ideal for thawing frozen food at room temperature.
• The food should be placed in the oven in its wrapping to prevent it from drying out.
HOW TO OPERATE THE OVEN
• Turn the selector knob to the required function. The oven light switches on.
• Turn the thermostat knob clockwise to the required temperature. The red thermostat led lights up, switching off again when the oven reaches the selected temperature.
At the end of cooking time:
• Turn the knob to “0”.
2
4
3
5
6
7 8
9
5. Control knob for front left hotplate
01...10 *.
6. Control knob for rear left hotplate
01...10 *.
7. Control knob for rear right hotplate
01...10 *.
8. Control knob for front right hotplate
01...10 *.
COOKING TIME SELECTOR
This selector can be used to set a cooking time of between 1 and 120 minutes. To set cooking time, after selecting the required cooking function, turn the knob right round in a clockwise direction and then turn it back in the opposite direction to the desired cooking duration. At the end of the set cooking time the oven switches off and the selector remains positioned at "0". To use the oven in manual mode, i.e. without setting a cooking time, make sure that the programme selector is turned to the symbol .
Important:
When the selector is positioned at “0” the oven will not switch on. To switch the oven on, set the selector to the symbol or set a cooking time.
9. Cooktop ON indicator light. * The cooktop control knobs are not interchangeable.
After cleaning or servicing, they must be returned to their original positions.
5019 610 56187
COOKING TABLES COOKING TABLE FOR GRILL FUNCTIO N
FOOD Function Pre heating
MEAT
Lamb, Kid, Mutton
Veal, Beef, Pork
Chicken,
Rabbit,
Duck
Tur key
(kg. 3-5)
Goose (2 Kg)
FISH
(1 kg)
Gilt-head, Bass,
Tuna, Salmon, Cod
FISH
(<1 kg - steaks) Swordfish, Tuna
VEGETABLES
Peppers, T omatoes,
Roast potatoes
SWEETS,
PASTRIES, ETC.
Leavened cakes
Filled pies
(with cheese)
Tarts
Apple strudel,
Crèpes
Biscuits, Sponge
rings, Shortbread
Choux buns, Sweet
sponge rolls
Savoury pies, Filled
fruit pies, e.g.
Pineapple, Peach Lasagna, potatoes
au gratin,
cannelloni, pasta
timbales
Bread
pizza
Vol-au-vents
Soufflés
Shelf
Temperature
(from the
bottom)
X 2 200 90 - 110 X 2 200 100 - 110 X 2 200 90 - 110 X 2 200 90 - 110 X 2 200 70 - 80 X 2 200 70 - 80 X 2 210 160 - 180 X 2 200 170 - 180 X 2 210 100 - 130 X 2 200 100 - 130 X 2 200 60 - 80 X 2 190 60 - 80 X 2 190 50 - 60 X 2 190 50 - 60 X 2 X 2 X 2 X 2 X 2 X 2 X 2 X 2 X 2 X 2 X 2 X 2 X 2 X 2 X 2 X 2 X 2 X 2 X 2 X 2 X 2 X 2 X 2 X 2 X 2 X 2
Cooking
(°C)
190 190 180 40 - 50 180 40 - 50 190 60 - 90 180 60 - 90 190 40 - 50 180 40 - 50 200 50 - 60 190 50 - 60 180 20 - 30 180 30 - 40 180 35 - 45 180 35 - 45 200 50 - 60 190 45 - 55 200 40 - 50 190 40 - 50 210 30 - 40 210 30 - 40 225 15 - 20 210 20 - 30 210 20 - 30 200 30 - 40 200 40 - 50 190 50 - 60
time
min
50 - 60 50 - 60
Shelf
Temperature
FOOD Function Pre heating
Toa s te d sa nd w ic h X 3-4 200-225 10 - 15
Steak X 3-4 200-225 30 - 40
Cutlets X 3-4 200-225 30 - 40
Sausages X 3 200-225 30 - 40
Chops X 3 200-225 30 - 40 Fish (steaks) X 3 200-225 30 - 40 Chicken legs X 3 200-225 40 - 50
Kebabs X 3 200-225 40 - 50
Spare ribs X 3 200-225 40 - 50 1/2 chicken X 3 200-225 40 - 50 1/2 chicken - 3 200-225 40 - 50
Whole chicken - 2-3 200-225 60 - 70
Roast
(pork, beef)
Duck - 1-2 200-225 60 - 80
Leg of lamb - 1-2 200-225 80 - 100
Roast beef - 2 200-225 60 - 70
Roast potatoes - 2-3 200-225 40 - 50
Fish, e.g. gilt-
head, trout
(from the
bottom)
- 2-3 200-225 60 - 80
- 3 190-200 40 - 50
(°C)
Cooking
time
•Note: Cooking times and temperatures are for guidance only.
min
Cooktop Functions Table (depending on model)
Function Description of function
HEAT
MAINTENANCE
DUAL ZONE
ICP (initial cooking
function)
FAST BOIL
GENTLE HEAT
This symbol does not correspond to any cooktop function; the heating element is off.
HOW TO OPERATE THE COOKTOP
The oven control panel features 4 adjustable knobs for cooktop operation. The cooktop control knobs are marked with a numerical scale corresponding to different power settings, and a series of function symbols.
• Turn the control knob of the relevant hotplate clockwise to the desired power setting (see the instructions supplied with the cooktop).
The yellow led lights up, indicating operation.
To maintain a constant temperature of 60° until the end of cooking. To select this function , turn the knob to
.
This is available on the front left and rear left hotplates. This extends the heating area of the cooktop in order to allow the use of large, oval or rectangular pots or cooking receptacles. To select this function: turn the knob to and wait until the residual heat indicator for the hotplate begins to flash. Select the power setting required by turning the knob anti-clockwise. The residual heat indicator remains on to indicate that the cooktop is in use. To deselect, turn the knob to
"0"
.
This function accelerates the heating of the selected cooking zone for a specified length of time during the first part of the cooking cycle. To select this function, turn the knob to
.
Wait until the residual heat indicator for the hotplate begins to flash, then turn the knob anti-clockwise to the desired power setting. E.g.: if level work on full power for
1 minute
, after which it will continue on power setting end of cooking, unless the knob is turned to adjust the power setting. if level the hotplate will work on full power for setting
until the end of cooking, unless the knob is turned to adjust the power setting.
“6”
6 minutes,
This function can be used with all power settings,
after which it will continue on power
except for power setting “10”
is selected, the hotplate will
“1”
“1”
is selected,
“6”
until the
.
This function is used to bring water to the boil rapidly and remains on for a preset time. At the end of the preset time, the cooktop automatically returns to the maximum power setting. This function can be selected even during cooking. Important: Before selecting this function, make sure the pot is positioned on the selected hotplate in order to avoid any damage to the cooktop surface. The stated performance values for this function are those guaranteed for all glass ceramic cooktops. For this function, place the pot on the selected hotplate and turn the knob to . To deselect, change the position of the knob.
To allow dough to rise, to soften butter taken from the fridge, to keep baby bottles or food warm, also for making yoghurt, melting chocolate, etc. This function is only available when the residual heat indicator is on. For this function, make sure the residual heat indicator of the desired hotplate is on. Turn the knob to . To deselect the function, change the position of the knob.
Loading...