Page 1
Page 2
Page 3
User’s Guide
MS872F
SELECTION OF WASH PROCESS
Full-Automatic Program
Wash Wash Time Time of Spin Time
Program (minutes) Rinse (minutes)
Normal 3+17 2 3 Heavily soiled laundry and frequently changed garments.
Gentle 8 2 2 Normally soiled laundry and light texture fabrics.
Quick 6 1 3 Normal to lightly soiled laundry.
Wool 6 2 2
• Double Power Wash will be applied on Normal program. Low water level is used in the 1st stage of washing (approximately 70% of
water), combining concentrated detergent and strong washing force to clean laundry for 3 minutes. Washer will be filled to optimum
level of water and begin 2nd stage of cleaning.
• This washer’s washing resembles hand washing manner, wheels and reverse spinning creating concurrent and turns similar to hand
rubbing cleaning of laundry.
• Wash time and spin time shown in this table is only for water level 7 washing.
• Softener can be added to dispenser for programs with 2 rinse cycles.
Machine washable wool withwoolmark label and soft
texture fabrics. (2.0kg maximum wash load suggested)
Wash Process Selection and Display (with 6 combinations of wash programs for selection)
Process
Display
Soaking Wash Rinse Spin
Preset Wash Process
Full Program
Wash Only
Spin Only
Wash + Rinse
Rinse + Spin
Scope of Application
WASH PROCEDURES AND PRODUCT SPECIFICATIONS
Wash Procedures
1. Put drain hose in place.
2. Connect water inlet pipe properly and turn on water tap.
3. Connect to the power source and turn on power supply.
4. Press “Wash Program” button to set the wash program or use the preset wash
program.
5. Press “Process” button to select your own required combination of wash processes
other than the full automatic process.
6. Press “Water Level” button for desired water level.
7. For heavily soiled laundry, press “Function” button to select the “Overflow Rinse”.
8. To clean washer drum, press “Function” button to select the “Basket Cleaning”.
9. Use “Wash & Spin Time” function to modify the preset wash and spin time.
10. Use “Delay Timer” function to select desired time to wash.
11. Empty the laundry of all coins, banknotes and tissue paper before loading it evenly
into the drum.
12. Place in detergent. Softener and bleach agent may also be added according to
needs.
13. Close the washer lid.
14. Press “Start / Pause” button to begin wash.
* The washer will be in delay time mode if “Delay Timer” is selected.
* When washing is finished, the buzzer will sound. Washer will shut off automatically in 3 mintues.
Product Specifications
Rated Voltage
Rated Frequency
Rated Input Power
Washing Capacity
Weight
Outer Shell Size
Cabinet Size
Water Pressure
220V~
50Hz
430W
6.5*
35*
547 x 559 x 936*
540 x 540*
0.02 - 0.78MPa
• Mode indicated by display light:
(flashing): indicates the on-going process.
(flashing) + buzzer alarm: indicates failure of operation due to faults.
Page 4
User’s Guide
MS872F
NOTES ON CONTROL PANEL
1. Power Switch
• Press the switch to connect the power; press it again to cut off power supply.
• The machine will automatically shut off in 3 minutes after completion of wash program
or when the machine is in abnormal operation mode.
• The washer will be in fuzzy logic status when switched on. When you press the
“START / PAUSE” button, the washer will start operating, autochecking, setting the
water level and completing the whole washing process. If you press other buttons
(except “POWER” & “START / PAUSE”, the washer will automatically quit the fuzzy
logic mode and enters into manual control mode.
2. Start / Pause
• Press the button to begin operation; press it again to suspend operation during the
wash process.
3. Function Selection
• “BASKET CLEANING” is only used for cleaning the drum; water level is preset at 7,
with 1 time rinsing, and in standard wash mode.
• Select “Extra Rinse” according to the degree of dirt of laundry. “Extra Rinse” is to add
one additional rinse in standard wash.
4. Wash / Spin Time
• Use these 2 buttons to change the program preset washing or draining time.
• Press button once to reduce 1 minute of time. Hold pressing the button for automatic
reduction of time in circular.
• When wash time indicates 0 minute, press once to return to 25 minutes. When spin
time indicates 0 minute, press once to return to 7 minutes.
• Press button to display program preset wash and spin time.
• When washing cycle is in progress or being paused, this button will not function.
5. Key Lock Function
• During program setting or washing cycle, press both “Time Set” and “Spin Time”
buttons together to lock all 9 buttons on control panel.
• Press both “Wash Time” and “Spin Time” buttons together again to release lock.
• Key lock function will be disabled automatically when there is functional difficulty with
the washer; function will resume when difficulty is resolved.
6. Delay Timer (to specify washing finish time)
• Press button to specify desired washing complete time from 0-12 hours. Each press
of button increases time by 1 hour.
• When the scheduled time is less than the programmed washing time, press “START /
PAUSE” button to start wash.
• The scheduled washing time will be displayed in hours indicating that washing process
will be finished at the display time. After setting the time, press the “START / PAUSE”
button. The washer will be in Start Delay mode. After 10 seconds, only the Delay
Timer indicator is lighted. When the washing cycle starts, the lights will return to their
original state. Due to different speeds of water intake, the actual finish time may vary
from the preset time.
7. Process Selection
• When the washer is paused, press button to select combination of wash process
other than preset process.
• Lights of respective programs will be on to indicate selection in progress.
• The flashing display light indicates progress of wash program.
8. Water Level Selection
• In fuzzy logic control mode, press “START / PAUSE” button, appropriate water level
will be selected automatically based on laundry load. It is unnecessary to press the
“Water Level” button.
• Press “Water Level” button for manual selection of water level, and automatically quits
fuzzy logic control mode.
• Water level indicator lights up when “Water Level” selection is Mini. 3, 5, 7, 9; indicator
blinks when selection is 2, 4, 6, 8, 10.
9. Wash Program
• Select appropriate wash programs according to fabric texture and degree of dirt of
laundry.
• Soaking cannot be use together with “Quick Wash” program.
CONSUMPTION OF WATER AND HANDLING OF COMMON FAULTS
Consumption of Water
Water Level Wash Load (kg) Water Consumed (L)
9/10 5.0-6.5 58/60
7/8 3.5-5.0 55/56
5/6 2.0-3.5 45/50
3/4 1.0-2.0 35/40
Mini/2 0-1.0 25/30
Handling of Common Problems
Manifestations
of Faults
E1
E3
E4
Attention
Causes and Solutions
After automatic adjustment for 2 times, imbalance problem
is still unresolved. Please place the laundry evenly. Or the
lid is not properly closed, or has been opened during wash
process. Close the lid to resume operation. “E1” status will
persist until faults are attended.
Indicating within the default time (5 minutes), water draining
is not completed. Problem may be the drain pipe is not put
down, or clogged, or frozen. Please put the drain pipe down
and clear pipe up. Open and close the lid once to resume
operation. If still unattended, the washer will shut down after
1.5 hours.
Indicating failure to attain the best water level after 30 minutes
water intake. To be treated and checked as “Malfunction of
Wash”. If problem is solved, open and close the lid again to
resume water intake. If problem is unattended, the washer
will shut down automatically after 1 hour.
If above problems still remains, contact our Star Service team
for repair. Please do not disassemble the machine by
yourselves.
The following symptom is not a problem:
• If the drum stops spinning during the spinning process, “b1” or “b2” will be displayed.
It means the laundry have shifted to one side while spinning creating an imbalance.
The washer will be fill with water again to attempt to redistribute the laundry and will
begin spinning again if the imbalance is corrected.
Whirlpool is committed to continued product enhancement.
29 8 7 3 16 5 4
Product materials and specifications is subject to changes without prior notice.
W10013928
Loading...