MHP1000SB
PRODUCT MODEL NUMBERS
MHP1000SB MHP1000SQ
LOCATION REQUIREMENTS
If the washer/dryer and pedestal assembly are located in a garage, 3" (76 mm) must be added under the pedestal so that the washer/dryer is
18" (458 mm) above the garage floor.
FRONT LOAD WASHER AND DRYER PEDESTAL
PRODUCT DIMENSIONS
B
C
Width - |
Height - |
Depth - |
“A” |
“B” |
“C” |
27" (686 mm) |
9¼" (235 mm) |
27" (686 mm) |
|
|
|
Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation |
Ref. W10178072B |
Instructions packed with product. Specifications subject to change without notice. |
10/17 |
Loading...