Whirlpool MFW9700AGW, MFW9700AWW INSTRUCTION FOR USE

GB MFW9700

PROGRAMME CHART

A.“Door locked” indication

B.“Aquastop” indication

C.“Water tap closed” indication

D.Programme selector knob

E.“Start delay” buttons

F.Temperature selection buttons

G.“Spin Speed Reduction” button

H.“Reset/Unlock door” button

I.“Child lock” button

J.“Start/Pause” button

B	A	D		K	J
C
		E	F	G	I
				H

K. Programme sequence indicator

Selecting any option the indication lights up. When the combination of programme, additional options and temperature is not possible, the indication lights switch off automatically and a signal sounds.

: optional / Yes: dosing required.

											Type of wash/Notes	Max.	Detergent and additives									Special Options								Max.	Tempe-
												Load																		Spin	rature
			Programme				Care						Pre-		Main		Softener			Start	Eco	Easy	Pre-		Extra			Rinse	Variable	Speed
							labels				- For temperature selection, respect the manufacturer’s recommendation on the		wash		wash					delay		ironing	wash		rinse			hold	spin
												kg																		rpm	°C
											care label.
											Slightly to normally soiled bed linen, table linen and underwear, towels, shirts
											etc. made of cotton and linen.
				Cotton /							At a temperature of 80°C or more, this programme eliminates bacteria,	10.0			Yes															1200	20 to 95
				Hygienic +							ensuring sanitization of your laundry. The bacteria removal efficiency has been
											tested following a similar methodology to the NF EN 13697 standard of Nov.
											2001.
											With heavily soiled laundry the additional “Prewash” option can be selected as well.
				Colours							Slightly to normally soiled bed linen, table linen and underwear, towels, shirts	10.0			Yes															1200	20 to 60
											etc. made of cotton and linen.
				Synthetics							Slightly to normally soiled blouses, shirts etc. made of polyester (Diolen,	4.5			Yes															1000 1)	20 to 60
											Trevira), polyamide (Perlon, Nylon) or blends with cotton.
				Daily load							Programme for slightly to normally soiled fabrics made of cotton and/or	4.5	—		Yes						—		—							1200	20 to 60
											synthetic fibres.
				Rapid plus							Slightly soiled overalls and sports wear made of cotton, polyester, polyamide and	4.5	—		Yes						—		—							1200	20 to 30
											blends with cotton.
				Delicate							Curtains and delicate dresses, skirts, shirts and blouses.	3.0			Yes						—									1000 1)	20 to 40
				Handwash							Textiles made of silk, linen, wool and viscose marked as “handwashable”.	2.5	—		Yes						—		—		—					400 2)	20 to 40
											If you select “Rinse Hold” do not leave items to soak for too long. A very gentle spin
											is used in this programme.
				Wool							Only woollens, labelled with the Woolmark and identified as machine washable.	2.0	—		Yes						—		—		—					1000 1)	20 to 40
											If you select “Rinse Hold” do not leave items to soak for too long.
				Big items							Blankets made of synthetic fibres, bedcovers filled with polyester or other	3.0			Yes						—	—								1000 1)	20 to 95
											artificial fibres, sleeping bags, bathmats and similar items.
				Gentle spin			—				In this programme spinning is gentle. Same as the spin cycle in the “Wool”	4.5	—		—		—				—	—	—		—			—		1000 1)	—
											programme.
				Spin			—				In this programme spinning is intensive. Same as the spin cycle in the “Colours”	10.0	—		—		—				—	—	—		—			—		1200	—
											programme.
				Rinse & Spin			—				Same as the last rinse and the final spin in the “Colours” programme.	10.0	—		—						—	—	—							1200	—

1)For improved garment care spin speed is restricted to 1000 rpm in this programme.

2)For improved garment care spin speed is restricted to 400 rpm in this programme.

5019 901 01000

CONSUMPTION DATA

	Programme	Temperature	Load	Water	Energy	Approximate programme duration
		(°C)	(kg)	(l)	(kWh)	(hours : minutes)*
	Cotton / Hygienic +	95	10.0	99**	3.15	2:45
	Colours***	60	10.0	92	1.70	2:45
	Colours	60	4.0	50	1.10	1:35
	Colours	40	10.0	92	0.96	2:35
	Synthetics	40	4.5	58	0.65	1:30
	Daily load	40	4.5	58	0.65	1:00
	Rapid plus	30	4.5	38	0.40	0:30
	Delicate	30	3.0	70	0.45	0:50
	Handwash	30	2.5	60	0.30	0:31
	Wool	40	2.0	60	0.50	0:35
	Big items	40	3.0	85	0.80	1:30

Prewash cycle increases programme duration by approximately 15 min. Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

*The remaining time indicator can deviate from the values in the table, because it takes into account the operating conditions applicable at that time.

**To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

***Reference programme for energy label.

ADD DETERGENT, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add the detergent as described in the programme table or in the chapter “Detergent and Additives” of the instructions for use.

1.Turn the programme selector to the desired programme.

2.The remaining time display shows the duration of the chosen programme (in hours and minutes) and the lamp of the “Start/Pause” button flashes.

3.The indicator of the predefined spin speed corresponding to the selected programme lights

up; it can be altered by pressing the “Variable Spin” button .

SELECT ANY DESIRED OPTION

Selecting any option the indication lights up. When the combination of programme, additional options and temperature is not possible, the indication lights switch off automatically and a signal sounds.

“Eco Wash” button

•The duration of the wash is extended and the temperature reduced. This saves you energy and maintains good washing results.

“Easy ironing” button

•Can be selected to reduce creasing.

•Increases the water quantity and the clothes are spun very gently.

“Prewash” button

•Only for heavily soiled laundry (e.g. sand, granular dirt). The cycle time increases by approx. 15 minutes.

“Intensive rinse” button

•More water and a longer time in rinse cycle is added.

•This option is particularly suitable for areas with very soft water, for baby clothes and to help people with allergies.

“Rinse hold” button

•The laundry remains in the last rinse water without being spun: this prevents creasing and colours from changing.

•This option is particularly recommended for the programme “Synthetics” or “Delicate”.

•This function is particularly useful if you want to postpone spinning to a later time, or if you want

to drain only.

Note: The programme starts to “Rinse hold” as soon as the “Rinse hold” indicator light in the programme display lights up.

Terminate the “Rinse hold” option :

•Press the “Rinse hold” button again; the programme will terminate automatically with the final spin cycle for the present wash programme.

•If you do not wish to spin the clothes, press the

“Reset/Unlock door” button . The water is drained out then, before the door can be opened.

“Variable spin” button

•Every programme has an automatic predefined spin speed.

•Press the button to set another spin speed.

•If spin speed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during rinse. The water is drained out only.

START DELAY

The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper.

•Select programme, temperature and options.

•Press the “Start delay” button to select the delay time by 1 to 23 hours;

•Press the “Start/Pause” button .

•The time delay indication disappears when the programme starts and it is replaced by the remaining time.

•The number of hours preselected can later be reduced pressing again the “Start delay” button.

To cancel the “Start delay”.

•Turn the programme selector to the “” position.

•Reselect the desired programme and options and press the “Start/Pause” button .

PROGRAMME START

Turn on the tap and press the “Start/Pause” button . The lamp of the “Start/Pause” button lights up.

The indicator lamps show the sequence reached in the programme. After starting the programme, the sequence indication runs from left to right through Prewash, Wash, Rinse, Spin.

When a sequence of the programme is finished the corresponding lamp goes out.

ADD WASHING/DOOR LOCK

Each time a programme starts the door is locked, the “Door locked” indication light comes on and approx. 0.5 litres of water enters the machine. In the programmes Cotton / Hygienic +, Colours, Synthetics, Daily load and Rapid plus, for 10 minutes at the beginning of the Main Wash the programme can be interrupted by pressing the “Start/Pause” button and the door can be opened again, e.g. to add more washing. After this time, the door remains locked until the end of the programme and must on no account be forced open. You will find more information about door locking in the Instructions for Use.

PROGRAMME END

• The time remaining is “0:00” and the “End” light is on.

1.Turn the programme selector to the “” position.

2.Turn the tap off and leave the door ajar to allow the drum to dry.

CHANGE THE PROGRAMME, TEMPERATURE, OPTIONS AFTER PROGRAMME START

1.Press the “Start/Pause” button to interrupt the programme. The light flashes.

2.Select the new programme (with temperature), any options and another spin speed if you want.

3.Press the “Start/Pause” button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

CANCEL (RESET) A RUNNING

PROGRAMME BEFORE THE END

Press the “Reset/Unlock door” button for at least 3 seconds. Any existing water is drained out before the door can be opened. Caution, the washing could still be hot!

CHILD LOCK

Detailed information can be found in the instructions for use.

The controls can be locked to avoid interference by children.

1.If the machine is off:

Turn the programme selector knob from the

OFF position “” to any programme. Do not press the “Start/Pause” button . Press the “Child lock” button for 5 seconds. The “Child

lock” indicator lights up. Turn the programme selector knob to the OFF position “” again.

2.While a programme is running:

Press the “Child lock” button for 5 seconds.

The child lock indicator will light up. Now, in spite of the programme selector knob being turned, no programme can be started or

altered. However, a running programme can be stopped at any time (e.g. in an emergency), by turning the programme selector knob to “”. Attempts at changing during the running programme are signalled by the lamp of the accidentally chosen programme flashing. The indicator light for the actual programme running is on.

To unlock the controls, the machine must either have a programme running or be in select mode. Press the “Child lock” button for 5 seconds. The child lock lamp will go out.

5019 901 01000