Whirlpool MAF8012AW MM INSTRUCTION FOR USE
90101755GB.fm Page 1 Tuesday, October 30, 2007 2:52 PM
GB PROGRAMME CHART
A. Programme selector
B. Display
C. “Temperature” button
D. “Spin” button
E. “Start delay” button
F. “Start” button
G. “Cancel/Reset” button
H. “Favourites” button
Tempe-
Programme
Cotton
(Hygienic)
Coloured
Cotton
SuperEco
Synthetics
Everyday
Wash
Express Wash
(30 min)
Sport
Delicate
Woollens
Handwash
Rinse & Spin
Spin
Gentle Spin
Drain
❉
: optional / Yes : dosing required
1)
For improved garment care, spin speed is restricted in these programmes.
2)
Do not use liquid detergent when activating the “Start Delay”.
3)
Do not use liquid detergent for the main wash when activating the “Prewash” option.
rature
- 95 °C
60 °C
- 40 °C
- 60 °C
- 60 °C
- 60 °C
- 30 °C
- 30 °C
- 40 °C
- 40 °C
- 40 °C
——
——
——
———
Care
Labels
Max
Load
kg
- Respect the manufacturer’s recommendations on the care label
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of
8.0
cotton and linen.
At a temperature of 95°C, this programme eliminates bacteria, ensuring sanitization of
8.0
your laundry. The bacteria removal efficiency has been tested following a similar
methodology to the NF EN 13697 standard of Nov. 2001.
8.0
Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made of
cotton and linen.
Offers highest economy in energy consumption by prolonged washing duration. Ideal to be run
8.0
overnight to additionally profit from the more favourable energy rates. To avoid noise of spinning
at night, set spin speed to “0” and start spin programme in the morning, or define programme
start with “Start delay” accordingly.
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide
3.5
(Perlon, Nylon) or blends with cotton.
Slightly to normally soiled textiles made of cotton and/or synthetics.
6.0
Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton.
6.0
Normally soiled and/or sweaty sportswear made of cotton jersey or microfibres. As this
programme includes a prewash cycle, add detergent also to the prewash chamber. Do not add
3.5
any softener.
Curtains and delicate clothing, dresses skirts, shirts and blouses.
2.5
Only woollens, labelled with the Woolmark and identified as machine washable.
This programme (40°C) is tested and approved by The Woolmark Company for machine
2.0
washable wool.
Textiles made of silk, linen, wool and viscose marked as “handwashable”.
This programme (40°C) is tested and approved by The Woolmark Company for
2.0
handwashable wool.
Same as the last rinse and the final spin in the “Cotton” programme.
8.0
In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.
8.0
In this programme spinning is gentle. Same as the spin cycle in the “Woollens” programme.
2.0
Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”.
Type of wash/Notes
The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company
for the washing of Woolmark garme nts labelled as “machine wash” or “hand wash” pr ovided that the garments
are washed according to the instructions on the garment label and those issued in this programme chart.
B
I
K
L
F C E D
I. Programme sequence indication
J
J. “Door open” indication
M
Your washing machine is equipped with
automatic safety functions which detect
G
and diagnose faults at an early stage and
react appropriately, e.g.:
K. “Water tap closed” indication
H
Detergents and additives Special options Start
A
Pre-
Main
wash
wash
3)
❉
❉
❉
❉
Yes
Yes
—
3)
Yes
Yes
—
Yes
—
3)
Yes
3)
Yes
Yes
—
Yes
—
——
Softe-
Pre-
ner
wash
❉❉❉❉ ❉❉❉ ❉
—
❉
❉❉❉❉ ❉❉❉ ❉
—
❉
—
❉
——
❉❉❉
—
❉
—
❉
—
❉
L. “Clean pump” indication
M. “Service” indication
Hold
Extra
Rinse
Rinse
❉❉
Anti
Crease
——
❉❉❉
———
❉
❉❉❉
———
———
❉
———
❉
❉❉
——
————————
————————
————————— — —
M0620
2)
delay
Eco Spin
Spin
❉❉
—
❉❉
❉❉
—
❉❉
❉❉
❉❉
❉❉
❉❉
❉❉
❉❉
5019 901 01755
Max
Spin
Speed
rpm
max.
max
1000
max
max.
1000
1000
1000
400
max.
max.
1000
1)
1)
1)
1)
1)
1)
Black process 45.0° 100.0 LPI
90101755GB.fm Page 2 Tuesday, October 30, 2007 2:52 PM
CONSUMPTION DATA
Programme
Temp e r a t ure
(°C)
Cotton (Hygienic) 95 8.0 82
Load
(kg)
Water
(l)
**
Energy
(kWh)
Approx. Programme Duration
(hours : minutes)
2.40 2:10
*
Coloured Cotton 60 8.0 77 1.52 2:10
Coloured Cotton with “Eco”
***
60 8.0 69 1.36 2:20
Coloured Cotton 40 8.0 77 0.85 2:05
SuperEco 60 8.0 75 0.95 4:00
Synthetics 60 3.5 48
**
0.95 1:35
Synthetics 40 3.5 44 0.55 1:20
Everyday Wash 40 6.0 79 0.70 1:00
Express Wash (30 min) 30 6.0 72 0.35 0:30
Sport 30 3.5 54 0.65 1:34
Delicate 30 2.5 60 0.45 0:50
Woollens 40 2.0 60 0.65 0:45
Handwash 40 2.0 45 0.65 0:40
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home
may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
The time indicated on the display can deviate from the values in the table, because it takes into account the household
*
conditions applicable at that time.
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
**
Reference Programme for Energy Label.
***
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
Add detergent as indicated on the front page and as
described in the chapter “Detergent and Additives” in
your Instructions for Use.
Turn the programme selector to the desired
programme. The
temperature
and
spin speed
indicated on the display can be altered by pressing the
“Temperature” button or the “Variable spin” button.
SELECT ANY DESIRED OPTION
When the combination of programme and additional
option(s) is not possible, the indication lights switch off
automatically. Unsuitable combinations of options are
deselected automatically.
“Prewash” button
• Only for heavily soiled loads (for example sand,
granular dirt) sensible. Increases the cycle time by
approximately 15 min.
• Do not use liquid detergent for the main wash
when activating the Prewash option.
“Hold Rinse” button
• The laundry remains in the last rinse water without
progressing to the final spin cycle to avoid creasing
and prevent colours from changing.
• This option is particularly recommended for the
programmes “Synthetics”, “Everyday Wash” and
“Delicate”.
• It is particularly useful if you want to postpone
spinning to a later time, or if you want to drain only .
• If you select “Hold Rinse”, do not leave the laundry
to soak for too long.
Note:
The programme stops to “Hold Rinse” at the
time the “Hold Rinse” symbol on the display lights
up. The light over the
“Start”
button flashes.
Terminate the “Hold Rinse” option:
• Press the
“Start”
button; the programme will
terminate automatically with the final spin cycle for
the present wash programme.
• If you do not wish to spin the clothes, select and
start the “Drain” programme.
“Extra Rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with
very soft water or for washing baby linen, and helps
people with allergies.
“Anti Crease” button
• Can be used together with “Cotton”, “Synthetics” and
“Everyday Wash” progra mmes to make ironing ea sier.
• Increases the water quantity and the clothes are
spun very gently.
“Eco” button
• With a modified temperature profile and a slightly
prolonged washing duration, the optimum
combination of excellent washing result and even
lower energy consumption is achieved.
“Spin” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain
during rinse. The water is drained out only.
SAVE YOUR FAVOURITE PROGRAMMES
If there is a programme setting which you use
frequently, the appliance offers the possibility to save
one setting for each programme so that it can be used
again by just pushing one button.
• Select the desired programme, temperature, spin
speed and option(s), push and hold the
“Favourites”
lamp next to
button for at least 3 seconds. The
“Favourites”
shortly flashes and then
lights up - the programme setting is saved.
Next time you want to use your individual programme
setting, select the programme, push the
button and start by pushing
“Start”
“Favourites”
.
If you want to replace the saved programme
setting by another one:
• Push the programme button, select temperature,
spin speed and options as desired and then press
and hold the
“Favourites”
button for at least
3 seconds. The previously saved programme
setting will be replaced by the new one.
START DELAY
The “Start Delay” allows to run the machine at the
consumer’s convenience, for example at night when
electricity is cheaper.
• Select programme, temperature, spin speed and options.
• Press the “Start Delay” button to select the delay
time up to 23 hours.
• Press the
“Start”
button.
The countdown of the delay time begins; the clock
symbol next to the delay time and the dot between
hours and minutes flash.
• The time delay indication disappears when the
programme starts and it is replaced by the
remaining programme time.
• Once having pressed the
“Start”
button, the number
of hours preselected can be reduced by pressing and
holding the “Start Delay” button. From 1 hour on, the
delay time can also be reduced by minutes.
To cancel the “Start Delay”
..before you press the “Start” button:
• Select another programme or press the
“Reset”
button.
..after having pressed the “Start” button:
• Press the
“Reset”
button for at least 3 seconds -
the start delay time disappears from the display.
PROGR AMME START
Open the tap and press the
“Start”
the
button comes on. The programme sequence
“Start”
button. The light over
indicator shows the current programme phase, running
from left to right through Wash, Rinse, Spin/Drain.
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the
symbol lights to show that the door can be opened. As
long as a wash programme is running, the door remains
locked and must on no account be forced open. In case
you have an urgent need to open it during a running
programme, refer to “Cancel (Reset) a running
programme before the end”.
RED INDICATIONS ON THE DISPLAY
“Water tap closed”
The appliance has no or insufficient water supply. Open
the water tap; if the indication still lights up, refer to the
“Troubleshooting Guide” in the Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the drain
hose is kinked or the filter must be cleaned; in the latter case
refer to the Instructions for Use (“Removing the Filter”).
“Service”
Lighting up of the “Service” indication can be caused by
a fault in an electrical component. Refer to the
“Troubleshooting Guide” in your Instructions for Use;
if the fault persists, contact our After Sales Service.
PROGRAMME END
• The symbols of the programme sequence
indicator are dark, and the “Door open” symbol
lights up.
1. Turn the programme selector to the “Off/0” poisition.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the
“Start”
button to pause the
programme. The light flashes.
2. Select the new programme, temperature, any
options and another spin speed if you want.
3. Press the
“Start”
button again. The new
programme continues at the same position where
the previous programme was interrupted. Do not
add detergent for this programme.
CANCEL (RESET) A RUNNING
PROGRAMME BEFORE THE END
“Reset”
The
• Press the
button cancels a programme before the end.
“Reset”
button for at least 3 seconds.
Any existing water is drained out before the door
can be opened.
5019 901 01755
Black process 45.0° 100.0 LPI
Loading...