Whirlpool MAF7510AW MM INSTRUCTION FOR USE

90101756GB.fm Page 1 Tuesday, October 30, 2007 2:52 PM

GB PROGRAMME CHART

A. “Door open” indication
This washing machine is equipped with

automatic safety functions which
detect and diagnose faults at an early
stage and react appropriately, e.g.:

B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication

L

J

C
D

G

E. Programme selector

H

F. “Start” button
G. “Spin” button
H. Programme sequence indicator

A
B

I. “Reset” button

I

J. “Start delay” button
K. “Temperature” button

MF K

E

L. Display
M. “Favourites” button

Max

Programme

Cotton

(Hygienic)

Coloured

Cotton

SuperEco

Synthetics

Everyday

Wash

Express Wash

(30 min)
Delicate

Woollens

Handwash

Rinse & Spin

Rinse & Gentle Spin

Spin

Gentle Spin

Drain

❉

: optional / Yes : dosing required

1)

For improved garment care, spin speed is restricted in these programmes.

2)

Do not use liquid detergent when activating the “Start Delay”.

3)

Do not use liquid detergent for the main wash when activating the “Prewash” option.

Tem pe -

rature

70 - 95 °C
50 - 60 °C

20 - 40 °C

20 - 60 °C

20 - 60 °C

20 - 60 °C

20 - 30 °C
20 - 40 °C

20 - 40 °C

20 - 40 °C

——
——
——
——
——

Care

Labels

Load

kg

- For temperature selection, respect the manufacturer’s recommendations on the care label

max.

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of
cotton and linen.
At a temperature of 80°C or more, this programme eliminates bacteria, ensuring

max.

sanitization of your laundry. The bacteria removal efficiency has been tested following a
similar methodology to the NF EN 13697 standard of Nov. 2001.

6.0

Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made of
cotton and linen.

Offers highest economy in energy consumption by prolonged washing duration. Ideal to be run

max.

overnight to additionally profit from the more favourable energy rates. To avoid noise of spinning
at night, set spin speed to “0” and start spin programme in the morning, or define programme
start with “Start delay” accordingly.

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide

2.5

(Perlon, Nylon) or blends with cotton.

Slightly to normally soiled textiles made of cotton and/or synthetics.

3.0

Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton.

3.0

Curtains and delicate clothing, dresses skirts, shirts and blouses.

1.5

Only woollens, labelled with the Woolmark and identified as machine washable.
This programme (40°C) is tested and approved by The Woolmark Company for machine

1.0

washable wool.
Textiles made of silk, linen, wool and viscose marked as “handwashable”.

This programme (40°C) is tested and approved by The Woolmark Company for

1.0

handwashable wool.

Same as the last rinse and the final spin in the “Cotton” programme.

max.

Same as the last rinse and the final spin in the “Woollens” programme.

max.

In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.

max.

In this programme spinning is gentle. Same as the spin cycle in the “Woollens” programme.

1.0

Drain only - no spinning. Alternative method of terminating programme after “Hold Rinse”.

—

Type of wash/Notes

Detergents and additives Special options Start

Pre-

Main

wash

wash

Yes

Yes

Yes

Yes

3)

3)

3)

Yes

Yes

3)

Yes

Yes

❉

—

❉

—

—

❉

—

—
——

——

Softener Eco Pre-

❉❉❉❉❉❉

——

❉

❉❉❉❉❉❉

——

❉

——

❉

—

❉

——

❉

——

❉

——

❉

——

❉

Hold

wash

Rinse

❉❉

❉❉ ❉

❉

❉❉

❉

❉
❉❉

❉❉

————————
————————
———————— ——

The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company
for the washing of Woolmark garme nts labelled as “machine wash” or “hand wash” pr ovided that the garments
are washed according to the instructions on the garment label and those issued in this programme chart.

M0701

Extra
Rinse

Anti

Crease

—

——
——

——

——

—
—

5019 901 01756

delay

Spin

2)

❉

❉

❉

❉

❉
❉

❉

❉

❉

2)

❉

2)

❉

2)

❉

2)

❉

2)

❉

2)

❉

2)

❉

❉❉
❉❉
❉❉
❉❉

Spin

Max
Spin

Speed

rpm

max.

max.

1000

max.

max.

1000

1000

400

max.
max.
max.

1000

—

1)

1)

1)

1)

1)

Black process 45.0° 100.0 LPI

90101756GB.fm Page 2 Tuesday, October 30, 2007 2:52 PM

CONSUMPTION DATA

Programme

Temperature

(°C)

Cotton (Hygienic) 95 max. 70

Load

(kg)

Water

(l)

**

Energy

(kWh)

Approx. Programme Duration

(hours : minutes)

2.10 2:10

*

Coloured Cotton 60 max. 65 1.33 2:20

Coloured Cotton with “Eco”

***

60 max. 60 1.19 2:30

Coloured Cotton 40 6.0 62 0.75 2:05

SuperEco 60 max. 62 0.84 4:00

Synthetics 60 2.5 50

**

0.80 1:35

Synthetics 40 2.5 46 0.40 1:20

Everyday Wash 40 3.0 41 0.50 1:00

Express Wash (30 min) 30 3.0 41 0.30 0:30

Delicate 30 1.5 60 0.50 0:45

Woollens 40 1.0 60 0.50 0:45

Handwash 40 1.0 45 0.50 0:40

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home
may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

The time indicated on the display can deviate from the values in the table, because it takes into account the household conditions

*

applicable at that time.
To reduce the water temperature, some cold water is added at the end of the m ain wash cycle, before the pump drains the water out.

**

Reference Programme for Energy Label.

***

ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME

Add detergent as indicated on the front page and as
described in the chapter “Detergent and Additives” in
your Instructions for Use.

1. Turn the
programme. The display shows the programme
duration in hours and minutes as well as the
predefined temperature. The

2. The
“Temperature” button.

3. The indication lamp of the predefined
lights up; in case you want to set another spin speed,
press the “Variable spin” button.

programme selector

temperature

can be altered by pressing the

to the desired

button flashes.

“Start”

spin speed

SELECT ANY DESIRED OPTION

Push the button(s) of any option(s) desired - the respective
indication lights up.
When the combination of programme and additional
option(s) is not possible, the indication lights switch off
automatically. Unsuitable combinations of options are
deselected automatically.

“Prewash” button

• Only for heavily soiled loads (for example sand,

granular dirt) sensible. Increases the cycle time by
approximately 15 min.

• Do not use liquid detergent for the main wash when

activating the Prewash option.

“Hold Rinse” button

• The laundry remains in the last rinse water without

progressing to the final spin cycle to avoid creasing and
prevent colours from changing.

• This option is particularly recommended for the
programmes “Synthetics”, “Everyday Wash” and “Delicate”.

• It is particularly useful if you want to postpone spinning
to a later time, or if you want to drain only.

• If you select “Hold Rinse”, do not leave the laundry to
soak for too long.

The programme stops to “Hold Rinse” at the

Note:

time the “Hold Rinse” light in the programme sequence
indicator is on. The indication lamp next to the
button flashes.

Terminate the “Hold Rinse” option:

• Press the
terminate automatically with the final spin cycle for the
present wash programme.

• If you do not wish to spin the clothes, turn the
programme selector to the “Drain” programme and
press the

“Extra Rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft
water , washing baby linen and helps people with allergies.

“Anti Crease” button

• Can be used together with “Cotton”, “Synthetics” and
“Everyday Wash” programmes to make ironing easier.

• Increases the water quantity and the clothes are spun
very gently.

“Spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain during
rinse. The water is drained out only.

button; the programme will

“Start”

button.

“Start”

“Start”

“Eco” button

• With a modified temperat ure profile and a slightly
prolonged washing duration, the optimum
combination of excellent washing result and even
lower energy consumption is achieved.

SAVE YOUR FAVOURITES PROGRAMMES

If there is a programme setting which you use frequently,
the appliance offers the possibility to save one setting for
each programme so that it can be used again by just
pushing one button.

• Select the desired programme, temperature, spin
speed and option(s), push and hold the
button for at least 3 seconds. The lamp next to

“Favourites”

programme setting is saved.

Next time you want to use your individual programme
setting, select the programme, push the
button and start by pushing

If you want to replace the saved programme setting
by another one:

• Push the programme button, select temperature, spin
speed and options as desired and then press and hold
the

“Favourites”

previously saved programme setting will be replaced
by the new one.

shortly flashes and then lights up - the

“Start”

button for at least 3 seconds. The

“Favourites”

“Favourites”

.

START DELAY

The “Start Delay” allows to run the machine at the
consumer’s convenience, for example at night when
electricity is cheaper. Do not use liquid detergent when
activating the “Start Delay”.

• Select programme, temperature and options.

• Press the “Start Delay” button to select the delay time
by 1 to 23 hours;

• Press the
The indication light next to the “Start Delay” button
lights up and the countdown of the delay time begins.
During the countdown, the light over the “Start
Delay” button and the dot between hours and minutes
on the display flashes.

• The time delay indication disappears when the
programme starts and it is replaced by the remaining
programme time.

• Once having pressed the
of hours preselected can be reduced by pressing and
holding the “Start Delay” button. From 1 hour on, the
delay time can also be reduced in steps of 10 minutes.

To cancel the “Start Delay”
..before you press the “Start” button:

• Turn the programme selector to another position or
press the

..after having pressed the “Start” button:

• Press the
start delay time disappears from the display.

button.

“Start”

“Start”

button.

“Reset”

button for at least 3 seconds - the

“Reset”

button, the number

PROGR AMME START

Open the tap and press the
indication lamp over the
programme sequence indicator shows the current
programme phase, running from left to right through
Wash, Rinse, Spin/Drain.

“Start”

button. The

“Start”

button lights up. The

The display shows the remaining programme time. Due to
variations in load and temperature of inlet water, the remaining
time is newly calculated in certain programme phases. If this is
the case,

an animation appears on the display

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp
lights to show that the door can be opened. As long as a
wash programme is running, the door remains locked and
must on no account be forced open. In case you have an
urgent need to open it during a running programme, refer
to “Cancel (Reset) a running programme before the end”.

RED INDICATIONS

“Service”

Lighting up of the “Service” indication can be caused by a
fault in an electrical component. Refer to the
“Troubleshooting Guide” in your Instructions for Use; if
the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open
the water tap; if the indication still lights up, refer to the
“Troubleshooting Guide” in your Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain
hose is kinked or the filter must be cleaned; in the latter case
refer to the Instructions for Use (“Removing the Filter”).

PROGRAMME END

• All the lights of the programme sequence indicator
are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START

1. Press the
The light flashes.

2. Select the new programme, temperature, any options
and another spin speed if you want.

3. Press the
continues at the same position where the previous
programme was interrupted. Do not add detergent
for this programme.

button to pause the programme.

“Start”

button again. The new programme

“Start”

CANCEL (RESET) A RUNNING
PROGRAMME BEFORE THE END

The

• Press the

button cancels a programme before the end.

“Reset”

existing water is drained out before the door can be
opened.

button for at least 3 seconds. Any

“Reset”

5019 901 01756

.

Black process 45.0° 100.0 LPI