How it Works
Whirlpool
Loading...
LTE5243DQ8
Owner’s Manual
28 pgs4.49 Mb0
Dimension Guide
1 pgs190.4 Kb0
Installation Guide
16 pgs2.36 Mb0

Whirlpool LTE5243DQ8, LTE5243DQ9, LTE5243DQA, LTE5243DQB, LTG5243DQ8 Owner’s Manual

...
WASHER/DRYERUSERINSTRUCTIONS
INSTRUCTIONSPOURUUTILISATEUR
DELALAVEUSE/SECHEUSE
TableofContents/Tabledesmati6res
ASSISTANCE OR SERVICE ............................ 1
ACCESSORIES ................................................. 2
WASHER/DRYER SAFETY .............................. 2
WASHER USE .................................................. 6
DRYER USE ...................................................... 7
WASHER/DRYER CARE ................................. 8
TROUBLESHOOTING WASHER ................... 10
TROUBLESHOOTING DRYER ...................... 12
Para obtener acceso al manual de uso y cuidado en espa_ol, o para obtener informaci6n adicional acerca de su producto, visite: www.whirlpool.com
Tenga listo su n0mero de modelo completo. Puede encontrar el n0mero de modelo y de serie dentro de la cavidad superior de la puerta.
SECURITE DE LA LAVEUSE/SECHEUSE ....16
ENTRETIEN DE LA LAVEUSE/SECHEUSE..22
DEPANNAGE DE LA LAVEUSE ..................... 24
DEPANNAGE DE LA SECHEUSE .................. 26
If you need assistance or service, first see the "Troubleshooting" section. Additional help is available by calling our Customer eXperience Center at 1-800-253-1301 from anywhere in the U.S.A., or write:
Whirlpool Corporation
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022-2692
Information may also be obtained by visiting our website at
www.whirlpool.com. In Canada, for assistance, installation or service, call us at
1-800-807-6777, or write:
Whirlpool Canada LP
Customer Interaction Centre
1901 Minnesota Court
Mississauga, Ontario L5N 3A7
In Canada, visit www.whirlpool.ca. Please include a daytime phone number in your correspondence.
Keep this book and your sales slip together for future reference. You must provide proof of purchase or installation date for in-warranty service.
Write down the following information about your appliance to help you obtain assistance or service if you ever need it. You will need to know your complete model number and serial number. You can find this information on the model and serial number label, located
at the top inside dryer door well.
Dealer name
Serial number Address Phone number
Model number Purchase date
W10196553A
Enhance your dryer with these premium accessories.
For more high-quality items or to order, call 1-800-901-2042, or visit us at www.whirlpool.com/accessories.
Part Number Accessory Part Number Accessory
20-48KITRC 4 ft (1.2 m) gas line dryer connector 8212656RP 10 ft (3.0 m) Inlet hose, Black EPDM
installation kit (2 pack)
PT220L 4 ft (1.2 m) dryer cord, 3-wire, 30 amp 8212638RP 6 ft (1.8 m) Nylon braided inlet hose, space-
PT400L 4 ft (1.2 m) dryer cord, 4-wire, 30 amp 8212487RP 5 ft (1.5 m) Nylon braided inlet hose.
PT600L 6 ft (1.8 m) dryer cord, 4-wire, 30 amp 8212637RP 6 ft (1.8 m) Inlet hose, Black EPDM, space
8212614 Dryer vent lint brush 8212545RP 5 ft (1.5 m) Inlet hose, Red and Blue EPDM.
3404351 Drying rack - fits 29" (737 mm) 8212641RP 5 ft (1.5 m) Inlet hose, Black EPDM (2 pack)
Super Capacity, 6.5 cu. ft (0.18 cu. m) - side swing or hamper door
3406839 Drying rack - fits 29" (737 mm) 8212546RP 4 ft (1.2 m) Inlet hose, Black EPDM (2 pack)
Super Capacity Plus, 7.0 cu. ft (0.20 cu. m)
- side swing door only 49971 Compact dryer stand - white 31682 All purpose appliance cleaner 49572 LP gas conversion kit 1903WH Laundry supply storage cart
This washer does not include inlet water hoses.
In Canada call 1-800-807-6777, or visit us at www.whirlpoolparts.ca.
saving 90° elbow, hypro-blue steel
couplings. (2-pack)
(2-pack)
saving 90° elbow, hypro-blue steel
couplings. (2-pack)
(2-pack)
WASHER/DRYERSAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING." These words mean:
You can be kiUed or seriously injured if you don't immediately follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
2
WARNING - ".iskofFire"
- Clothes dryer installation must be performed by a qualified installer.
- Install the clothes dryer according to the manufacturer's instructions and local codes.
- Do not install a clothes dryer with flexible plastic venting materials, if fle×ible metal (foil type) duct is installed, it must be of a specific type identified by the appliance
manufacturer as suitable for use with clothes dryers. Fle×ible venting materials are known to collapse, be easily crushed, and trap lint. These conditions will obstruct
clothes dryer airflow and increase the risk of fire.
- To reduce the risk of severe injury or death, follow all installation instructions.
- Save these instructions.
WARNING: For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, or to prevent property damage, personal injury, or death.
- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
- WHAT TO DO iF YOU SMELL GAS:
= Do not try to light any appliance. = Do not touch any electrical switch; do not use any phone in your building.
= Clear the room, building, or area of all occupants. = Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's
instructions.
• If you cannot reach your gas supplier, call the fire department.
- Installation and service must be performed by a qualified installer, service agency, or the gas supplier.
WARNING: Gas leaks cannot always be detected by smell. Gas suppliers recommend that you use a gas detector approved by UL or CSA.
For more information, contact your gas supplier. If a gas leak is detected, follow the "What to do if you smell gas" instructions.
IM PORTANT SAFETY iNSTRUCTiONS
WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the washer/dryer, follow basic
precautions, including the following:
[] Read all instructions before using the washer/dryer. [] Do not place items exposed to cooking oils in your dryer.
Items contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch fire.
[] Do not wash or dry articles that have been previously
cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, other flammable, or explosive
substances as they give off vapors that could ignite or explode.
[] Do not add gasoline, dry-cleaning solvents, or other
flammable, or explosive substances to the wash water. These substances give off vapors that could ignite or
explode.
[] Do not allow children to play on or in the washer/dryer.
Close supervision of children is necessary when the washer/dryer is used near children.
[] Before the washer/dryer is removed from service or
discarded, remove the doors to the washer/dryer compartments.
[] Do not reach into the washer/dryer if the tub, agitator or
drum is moving.
[] Do not install or store the washer/dryer where it will be
exposed to the weather.
[] Do not tamper with controls. [] Clean dryer lint screen before or after each load.
SAVE THESE INSTRUCTIONS
[] Under certain conditions, hydrogen gas may be produced
in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water
system has not been used for such a period, before using the washing machine, turn on all hot water faucets and let
the water flow from each for several minutes. This will
release any accumulated hydrogen gas. As the gas is
flammable, do not smoke or use an open flame during this time.
[] Do not repair or replace any part of the washer/dryer or
attempt any servicing unless specifically recommended in
this Use and Care Guide or in published user-repair
instructions that you understand and have the skills to carry out.
[] Do not use fabric softeners or products to eliminate static
unless recommended by the manufacturer of the fabric
softener or product.
[] Do not use heat to dry articles containing foam rubber or
similarly textured rubber-like materials.
[] Keep area around the exhaust opening and adjacent
surrounding areas free from the accumulation of lint, dust,
and dirt.
[] The interior of the machine and dryer exhaust vent should
be cleaned periodically by qualified service personnel.
[] See "Electrical Requirements" section of the Installation
Instructions booklet for grounding instructions.
4
Your dryer must be properly installed and vented to achieve maximum drying efficiency and shorten drying times. Use the
minimum recommended installation clearances found in the Installation Instructions. See the Installation Instructions for more
information.
Fire Hazard
Use a heavy metal vent.
Do not use a plastic vent. Do not use a metal foil vent.
Failure to follow these instructions can result in death
or fire.
If the dryer is not properly installed and vented, it will not be covered under the warranty. Proper venting of your dryer is important for satisfactory drying results. See the Installation Instructions for more detail.
NOTE: Service calls caused by improper venting will be paid for by the customer, whether it was a paid installation or self-
installed.
1.
Do not use plastic vent or metal foil vent. Use 4" (102 mm) metal or flexible metal vent. Do not kink or crush flexible metal
vent. It must be completely extended to allow adequate exhaust air to flow. Check vent after installation. Refer to the
Installation Instructions for proper length requirements of vent.
2. Use a 4" (102 mm) exhaust hood.
3. Use the straightest path possible when routing the vent.
Good Better
4.
Use clamps to seal all joints. Do not use duct tape, screws, or other fastening devices that extend into the interior of the vent
to secure vent, which can catch lint.
5.
Clean exhaust vent periodically, depending on use, but at least every 2 years, or when installing your dryer in a new
location. When cleaning is complete, be sure to follow the Installation Instructions supplied with your dryer for final product check.
WASHERUSE
For these suggested full-sized loads, set the LOAD SIZE selector to the highest load size setting.
LARGE CAPACITY WASHERS
Heavy Work Clothes
2 pair of pants 3 shirts
3 jeans 1 coverall
Mixed Load Towels Delicates Permanent Press Knits
2 double sheets 8 bath towels 2 camisoles 1 double sheet 2 pair of pants 4 pillowcases 8 hand towels 4 slips 1tablecloth 2 blouses 6 T-shirts 10 washcloths 6 undergarments 1 dress 4 shirts
6 pair of shorts 1 bath mat 2 sets of sleepwear 1 blouse 4 tops 2 shirts 1 child's outfit 2 pair of pants 2 dresses
2 blouses 3 shirts 6 handkerchiefs 2 pillowcases
Fire Hazard
Never place items in the washer that are dampened
with gasoline or other flammable fluids.
No washer can completely remove oil. Do not dry anything that has ever had any type of oil on
it (including cooking oils). Doing so can result in death, explosion, or fire.
3.
(OPTIONAL) Add liquid fabric softener. NOTE: Do not spill or drip any fabric softener onto the clothes.
Undiluted fabric softener can stain fabrics. Always dilute fabric softener with warm water. Too much fabric softener can make
some items (diapers and towels) nonabsorbent. If this happens, do not use it in every load, or use less of it in each
load. Style 1: With liquid fabric softener dispenser (on some
models)
Use only liquid fabric softener in this dispenser. Pour measured liquid fabric softener into the dispenser. Softener is added automatically during the rinse portion of the cycle. Dilute liquid fabric softener by filling the dispenser with warm water until liquid reaches the crossbar in the dispenser opening.
1.
Measure detergent and pour it into the washer. If desired, add powdered or liquid color safe bleach. Drop a sorted load of
clothes loosely into your washer.
• Load evenly to maintain washer balance. Mix large and small items. Items should move easily through the wash water. Overloading can cause poor cleaning.
2.
(OPTIONAL) Add liquid chlorine bleach. Always measure liquid chlorine bleach. Do not guess. Do not
use more than 1 cup (250 mL) for a full load. Follow manufacturer's directions for safe use. Use a cup with a pouring spout to avoid spilling.
Let the washer fill and begin agitating the load. Add bleach to the wash cycle so it can be removed in the rinse cycle. Pour
bleach around the agitator, not directly onto the load.
• Follow directions on the care labels. Do not use chlorine bleach on wool, silk, spandex, acetates, or some flame-
retardant fabrics.
NOTE: Undiluted bleach will damage any fabric it touches. The damage appears as rips, holes, tears, or color loss and may not show up until several washings later.
Style 2: Without liquid fabric softener dispenser (on some models)
• In the final rinse ONLY, add fabric softener that has been diluted with V2to 1 cup (125 to 250 mL) warm water.
4.
Close the washer lid. Washer will not agitate or spin with the lid open.
5.
Turn the WATER LEVEL selector to the correct setting for your wash load and the type of fabric being washed. You may
change the load size or water level selection after the washer has started filling by turning the selector to a different setting.
6.
Set the TEMPERATURE selector to the correct setting for the type of fabric and soils being washed. Use the warmest water
safe for fabric. Follow garment label instructions. NOTE: In wash water temperatures colder than 60°F (15.6°C),
detergents do not dissolve well. Soils can be difficult to remove. Some fabrics can retain wear wrinkles and have
increased pilling (the formation of small lint-like balls on the surface of garments).
7=
Push in the Cycle Control knob and turn it clockwise to the wash cycle you want. Reduce the wash time when using a
small load size setting. Pull out the Cycle Control knob to start the washer.
To stop or restart your washer:
• To stop the washer at any time, push in the Cycle Control knob.
• To restart the washer, close the lid (if open) and pull out the Cycle Control knob.
DRYERUSE
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from dryer.
Do not dry anything that has ever had anything
flammable on it (even after washing}.
Failure to follow these instructions can result in death,
explosion, or fire.
Before using your dryer, wipe the dryer drum with a damp cloth to remove dust from storing and shipping.
1. Clean lint screen before each load. See "Cleaning the Lint Screen."
2. Load clothes loosely into the dryer and close the door. Do not pack the dryer. Allow space for clothes to tumble freely.
3. Turn the Cycle Control knob to the recommended cycle for the type of load being dried. Use the Energy Preferred Automatic Setting to dry most heavy to medium-weight fabrics.
4. (OPTIONAL) Your dryer may have an END OF CYCLE SIGNAL. The signal is helpful when drying items that should be removed from the dryer as soon as it stops. The End of Cycle signal is part of the Start button and is selectable. Turn the
Start button to ON or OFR The signal will sound only if the selector is set to On.
5. If desired, add fabric softener sheet. Follow package instructions.
6. Press the PUSH TO START button.
Fire Hazard
No washer can completely remove oil. Do not dry anything that has ever had any type of oil on
it (including cooking oils}.
items containing foam, rubber, or plastic must be dried
on a clothesline or by using an Air Cycle.
Failure to follow these instructions can result in death
or fire.
Stopping and Restarting You can stop your dryer anytime during a cycle.
To stop your dryer
Open the dryer door or turn the Cycle Control knob to OFF. NOTE: The Cycle Control knob should point to an Off area when
the dryer is not in use.
To restart your dryer
Close the door. Select a new cycle and temperature (if desired). Press the PUSH TO START button.
WASHEP RYER CARE
Keep washer/dryer area clear and free from items that would obstruct the flow of combustion and ventilation air.
,; eaxsT_}_Ssd_4}_e bc _e(£4_;
Glean the lint screen before each load. A screen blocked by lint can increase drying time.
IMPORTANT:
• Do not run the dryer with the lint screen loose, damaged, blocked, or missing. Doing so can cause overheating and
damage to both the dryer and fabrics.
• If lint falls off the screen into the dryer during removal, check the exhaust hood and remove the lint.
Every Load Cleaning
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from dryer.
Failure to do so can result in death, explosion, or fire.
Cleaning the exterior Use a soft, damp cloth or sponge to wipe up any spills such as detergent or bleach. Occasionally wipe the outside of your washer
to keep it looking new.
Cleaning the interior Clean your washer interior by mixing 1 cup (250 mL) of chlorine
bleach and enough detergent to equal twice the manufacturer's recommended amount for a normal wash load. Pour this mixture
into your washer and run it through a complete cycle using hot water. Repeat this process if necessary.
NOTE: Remove any hard water deposits using only cleaners labeled as washer safe.
Cleaning the liquid fabric softener dispenser (on some models):
1. Remove dispenser by grasping top with both hands and squeezing, while pushing upward with thumbs.
2. Rinse dispenser under a warm water faucet, then replace it.
NOTE: If your model has a liquid fabric softener dispenser, do not wash clothes with this dispenser removed. Do not add detergent
or bleach to this dispenser; it is for liquid fabric softener only.
Style 1:
1. The lint screen is located inside the dryer on the back wall. Pull out the lint screen and its cover.
2. Separate the cover and the screen by squeezing the screen and pulling on the cover at the same time.
3. Roll lint off the screen with your fingers. Do not rinse or wash screen to remove lint. Wet lint is hard to remove.
4. Put the lint screen and cover back together and push firmly back into place.
Style 2:
1. The lint screen is located inside the dryer in the front door well. Pull the lint screen straight up.
2. Roll lint off the screen with your fingers. Do not rinse or wash screen to remove lint. Wet lint is hard to remove.
3. Push the lint screen firmly back into place.
As Needed Cleaning
Laundry detergent and fabric softener residue can build up on the lint screen. This buildup can cause longer drying times for your clothes, or cause the dryer to stop before your load is completely dry. The screen is probably clogged if lint falls off the screen.
Clean the lint screen (as outlined following) every 6 months, or more frequently if it becomes clogged due to a residue buildup.
1. Roll lint off the screen with your fingers.
2. Wet both sides of lint screen with hot water.
3. Wet a nylon brush with hot water and liquid detergent. Scrub lint screen with the brush to remove residue buildup.
4. Rinse screen with hot water.
5. Thoroughly dry lint screen with a clean towel. Replace screen in dryer.
This washer does not include water inlet hoses. Whirlpool Corporation recommends use of Factory Specified Parts. A list of
factory specified hoses available for separate purchase are listed on the first page of this user instructions. These hoses are manufactured and tested to meet Whirlpool Corporation's
specifications. Replace water inlet hoses after 5 years of use to reduce the risk of
hose failure. Periodically inspect and replace water inlet hoses if bulges, kinks, cuts, wear, or leaks are found.
When replacing your water inlet hoses, mark the date of replacement on the label with a permanent marker.
To clean dryer drum
1. Apply a nonflammable household cleaner to the stained area of the drum and rub with a soft cloth until stain is removed.
2. Wipe drum thoroughly with a damp cloth.
3. Tumble a load of clean cloths or towels to dry the drum.
NOTE: Garments that contain unstable dyes, such as denim blue jeans or brightly colored cotton items, may discolor the dryer
interior. These stains are not harmful to your dryer and will not stain future loads of clothes. Dry unstable dye items inside out to avoid transfer of dye.
From Inside the Dryer Cabinet
Lint should be removed every 2 years, or more often, depending on dryer usage. Cleaning should be done by a qualified person.
From Inside the Exhaust Vent
In Canada
Lint should be removed every 2 years, or more often, depending on dryer usage.
Install and store your washer/dryer where it will not freeze. Because some water may stay in the hoses, freezing can damage your washer/dryer. If storing or moving your washer/dryer during
freezing weather, winterize it.
Non-use or vacation care
Operate your washer/dryer only when you are at home. If you will be on vacation or not using your washer/dryer for an extended period of time, you should:
• Unplug washer/dryer or disconnect power.
• Turn off the water supply to the washer. This helps avoid flooding (due to a water pressure surge) while you are away.
Towinterize washer/dryer
1. Shut off both water faucets.
2. Disconnect and drain water inlet hoses.
3. Put 1 qt (1 L) of R.V.-type antifreeze in the basket.
4. Run washer on a drain and spin setting for about 30 seconds to mix the antifreeze and water.
5. Unplug washer/dryer or disconnect power.
To use washer/dryer again
1. Flush water pipes and hoses.
2. Reconnect water inlet hoses.
3. Turn on both water faucets.
In the U.S.A.
Electrical Shock Hazard
Plug into a grounded 4 prong outlet. Failure to do so can result in death or electrical shock.
• Plug in washer/dryer or reconnect power.
4. Run the washer through a complete cycle with 1 cup (250 mL) of detergent to clean out antifreeze.
To transport the washer/dryer
1. Shut off both water faucets.
2. Disconnect and drain water inlet hoses.
3. If washer/dryer will be moved during freezing weather, put in a qt (1 L) of R.V.-type antifreeze in the basket. Run washer on a spin setting for about 30 seconds to mix the antifreeze and
water.
4. Disconnect the drain from the drain system.
5. Unplug washer/dryer or disconnect power. Disconnect wiring if washer/dryer is direct wired.
6. Disconnect the exhaust vent.
7. Wash lint screen.
8. Make sure leveling legs are secure.
9. Place the inlet hoses into the basket.
10. Drape the power cord and drain hose over edge and into the basket.
11. Use masking tape to secure the washer lid and dryer door.
Reinstalling your washer/dryer
1. Follow the "Installation Instructions" to locate, level, and connect the washer/dryer.
2. Run the washer through a complete cycle with 1 scoop or capful of detergent to clean the washer and remove the antifreeze, if used.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.
Do not use an extension cord. Failure to follow these instructions can result in death,
fire, or electrical shock.
• Plug inwasher/dryer or reconnect power.
Loading...
+ 19 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use