Whirlpool LOE 5809, LOE 5109 INSTRUCTION FOR USE
GB
PROGRAMME CHART
A. “Door open” indication
This washing machine is equipped
with automatic safety functions which
detect and diagnose faults at an early
stage and react appropriately, e.g.:
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
Care
Programme
Labels
Cotton
with prewash 95 °C
95 °C
Cotton
40 - 60 - 95 °C
Synthetics
with prewash 60 °C
40 - 60 - 95 °C
60 °C
Synthetics
30 - 40 - 60 °C
30 - 40 - 60 °C
Max.
Load
kg
5.0
5.0
2.5
2.5
G
C
D
E
Type of wash / Notes
- respect the manufacturer's recommendations on the care label
Heavily soiled, long wearing and temperature stable textiles in cotton and linen (bed linen, table
linen, underwear, shirts etc.).
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of
cotton and linen.
Heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide
(Perlon, Nylon) or blends with cotton.
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide
(Perlon, Nylon) or blends with cotton.
E. Programme selector
F. “Start/Pause” button
A
B
G. Programme sequence indicator
H. “Reset” button
H
F
Detergents and Additives Special options
Pre-
wash
Main
Wash
Yes Yes
– Yes
Yes Yes
– Yes
Softener No spin Rinse
1)
1)
hold
Max. Spin
Speed
rpm
Max.
Max
Max.
Max.
Delicates
30 °C
30 °C
Quick wash
30 °C
30 °C
Wool
Cold - 40 °C
- 40 °C
Handwash
30 - 40 °C
Rinse & Spin
Spin
Gentle Spin
Drain
option / Yes : dosing required
1)
Do not use liquid detergents.
2)
For improved garment care spin speed is restricted to 400 rpm in this programme.
40 °C
–
–
–
– –
1.5
Curtains and delicate clothing, dresses, skirts, shirts and blouses.
3.0
Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton.
Only woollens with a felt-free finish, labelled with the woolmark and identified as machine
1.0
washable.
1.0
Textiles made of linen, silk, wool and viscose marked as “handwashable”.
5.0
Same as the last rinse and the final spin in the “Cotton” programme.
5.0
In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.
1.0
In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.
Water is drained only without any spinning. Alternative method of terminating programme after
“Rinse Hold”.
– Yes
– Yes
– Yes
– Yes
– –
– – –
– – –
– – – – – –
– Max
– Max.
Max.
Max
Max.
400
Max
5019 501 01008
2)
CONSUMPTION DATA
Temperature
Programme
Cotton 95 5.0 49* 1.90 2:00
Cotton** 60 5.0 44 0.85 2:20
Cotton 40 5.0 44 0.60 2:00
Synthetics 60 2.5 50* 0.70 1:30
Synthetics 40 2.5 45 0.55 1:15
Delicates 30 1.5 50 0.50 0:45
Quick wash 30 3.0 40 0.40 0:30
Wool
Handwash 40 1.0 45 0.60 0:40
Handwash 30 1.0 45 0.50 0:36
Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the
home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type
of wash.
* To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
** Reference Programme for Energy Label.
ADD DETERGENTS, CLOSE THE DOOR AND
SELECT THE PROGRAMME
Add detergents as indicated on the front page and as
described in your Instructions for Use. Close the door
and turn the programme selector to the desired
programme and temperature. The indication lamp next
to the “Start/Pause” button flashes.
SELECT ANY DESIRED OPTION
Selector
(°C)
40 1.0 55 0.60 0:45
Push the button(s) of any option(s) desired - the
respective indication lamp lights up.
When the combination of programme and
additional option(s) is not possible, the indication
lights switch off automatically.
Unsuitable combinations of options are deselected
Load
(kg)
Water
(l)
Energy
(kWh)
Approx. Programme
(hours : minutes)
“Rinse hold” button
• The laundry remains in the last rinse water
without progressing to the final spin cycle to
avoid creasing and prevent colours from
changing.
• This option is particularly recommended for
the programmes “Synthetics” and “Delicates”.
• It is particularly useful if you want to postpone
spinning to a later time, or if you want to drain
only.
• If you select “Rinse hold” do not leave items to
soak for too long.
Note: The programme stops to “Rinse hold” at
the time the “Rinse hold” light in the programme
sequence indication is on. The indication lamp
next to the “Start/Pause”
button flashes.
Duration
automatically.
Terminate the “Rinse hold” option:
“No spin” button
• Especially for delicate garments to avoid wear
and tear caused by the spin.
Note: with the “Cotton” and “Synthetics”
programmes, a short spin cycle is provided in
any case, even if the “No spin” option has been
selected, in order to optimize rinsing results.
• Press the “Start/Pause” button; the programme
will terminate automatically with the final spin
cycle for the present wash programme.
• If you do not wish to spin the clothes, turn the
programme selector knob to the “Drain”
programme and press the “Start/Pause”
button.
PROGRAMME START
Open the tap and press the “Start/Pause”
button. The indication lamp next to the “Start/
Pause”
button lights up. The programme
sequence indicator shows the current programme
phase, running from left to right through Wash,
Rinse, Spin/Drain.
When the programme phrase is finised, the
corresponding indication goes out.
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the
lamp lights to show the the door can be opened.
As long as a wash programme is running, the door
remains locked and must on no account be forced
open. In case you have an urgent need to open
it during a running programme, refer to “Cancel
(Reset) a running programme before the end”.
RED INDICATIONS
“Service”
Lighting up of the “Service” indication can be
caused by a fault in an electrical component.
Refer to the “Troubleshooting Guide” in your
“Instructions for Use”; if the fault persists, contact
our After Sales Service.
“Water tap closed”
The appliance has no or insufficient water supply.
Open the water tap: if the indications still lights
up, refer to the “Troubleshooting Guide” in the
Instructions for Use.
“Clean pump”
Waste
water is not pumped out. Check whether
the drain hose is kinked or the filter must be
cleaned: in the latter case refer to the Instructions
for Use (“Removing the Filter”).
PROGRAMME END
• All the lights of the programme sequence
indicator are off, and the “Door open”
indication lights up.
1. Turn the programme selector to the “Off/O”
position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the “Start/Pause” button to pause the
programme. The light flashes.
2. Select the new programme (with temperature),
any options and another spin speed if you want.
3. Press the “Start/Pause” button again.
The new programme continues at the same
position where the previous programme was
interrupted. Do not add detergent for this
programme.
CANCEL (RESET) A RUNNING PROGRAMME
BEFORE THE END
The “Reset” button cancels a programme before
the end.
• Press the “Reset” button for at least 3 seconds.
Any existing water is drained out before the
door can be opened.
5019 501 01008
Loading...