Whirlpool LOE 1071 INSTRUCTION FOR USE

GB PROGRAMME CHART

A. “Door open” indication

This washing machine is equipped
with automatic safety functions which
detect and diagnose faults at an early
stage and react appropriately, e.g.:

B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication

Care

Programme

Cotton

95°C

Cotton

60 - 40 °C

Synthetics

40 - 60 °C

Sport

30 °C

Delicates

30 - 40 °C

Daily load

40 °C

Quick wash

30 °C

Wool

Cold - 40 °C

Handwash

30 - 40 °C

ALGOD.

95°C

ALGOD.

60 - 40 °C

SINTÉTICOS

40 - 60 °C

SPORT

30 °C

DELICDOS

30 - 40 °C

DIARIO

40 °C

RÁPIDO

30 °C

LANA/LÃ

- 40 °C

A MANO/MÃO

30 - 40 °C

Labels

Rinse & Spin

Spin

Gentle Spin

Drain

i : option / Yes : dosing required

1)

For improved garment care spin speed is restricted

to 400 rpm in this programme.

E. Programme selector

H

C
D
J

A

B

I

F. “Start/Pause” button

G. Spin speed selector

H. Programme sequence indicator
and Start delay indication

I. “Reset” button

J. “Start delay” button

G

Max.
Load

- respect the manufacturer's recommendations on the care label

kg

Normally to heavily soiled and robust white cotton laundry. In case of heavy soiling or

7.0

stains, you can add an oxygenbased bleach additive which can be used at 95°C. This
programme eliminates bacteria, ensuring sanitization of your laundry.

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made

7.0
of cotton and linen.

Normally soiled garments made of artificial fibres (like polyester, polyacryl, viscose etc.)

3.0
or their blends with cotton.

Normally soiled and sweaty sportswear made of cotton jersey or microfibres.

3.0

This programme includes a prewash cycle – add detergent also to the prewash chamber. Do
not add any softener.

1.5 Curtains and delicate clothing, dresses, skirts, shirts and blouses.

Slightly to normally soiled robust laundry made of cotton, linen, artificial fibres and their

4.0

blends. Effective one-hour programme. Make sure to wash only similar colours together in
one wash load.

Shortly worn clothing made of cotton, polyester, polyamide and blends with cotton.

4.0

Brief programme to refresh your laundry.

Only woollens, labelled with the Woolmark and identified as machine washable.

1.0

This programme (40°C) is tested and approved by The Woolmark Company for machine
washable wool.

Textiles made of linen, silk, wool and viscose marked as “handwashable”.

1.0

Care programme with a very gentle spin. This programme (40°C) is tested and approved
by The Woolmark Company for handwashable wool.

–

–

–

–

7.0 Same as the last rinse and the final spin in the “Cotton” programme.

7.0 In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.

1.0 In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.

Water is drained only without any spinning. Alternative method of terminating programme

–

after “Rinse hold”.

The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of
Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the
instructions on the garment label and those issued in this programme chart. M0619

Type of wash / Notes

Detergents and Additives Special options Max.

Pre-

wash

i

i

i

i

i

–

–

–

–

– –

– – – – – –

– – – – – –

– – – – – – –

E

Main

Wash

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Softener

F

Prewash

PRELAVA.

i i i i i i

i i i i i i i

i i i i i i i

– –

i i

i

i

i

i

i

Intensive

rinse

EXTRA

ACL./ENX.

–

– –

– –

– –

–

Rinse

hold

PAR.CUBA

LLENA/CHEIA

i i i i i

–

i i i i

i i i i

i i i

i i i

i i i

i i i

Spin

Start

Rapid

CENTRF.

Ignis is a registered trademark of Whirlpool USA.

delay

INICIO

DIFERIDO

i i

i i

RÁPIDO

i

Spin

Speed

rpm

max.

–

max.

max.

max.

max.

–

max

–

max

–

max.

–

– 400

max

–

max

–

max.

–

– –

1)

5019 501 01024

CONSUMPTION DATA

Programme

Cotton 95 7.0 74* 2.10 2:10 ­Cotton ** 60 7.0 54 1.05 4:00 2:30
Cotton ** 60 3.5 40 0.85 3:00 ***

Cotton 40 7.0 69 0.80 3:15 2:15
Cotton ** 40 3.5 40 0.65 3:00 ***
Synthetics 60 3.0 50* 0.80 1:35 1:14
Synthetics 40 3.0 46 0.50 1:20 0:59

Sport 30 3.0 56 0.60 1:34 1:13

Delicates 30 1.5 60 0.50 0:45 -

Daily load 40 4.0 45 0.50 1:00 -

Quick wash 30 4.0 45 0.40 0:30 -

Wool 40 1.0 60 0.50 0:45 -

Handwash 40 1.0 45 0.50 0:40 -

Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the
home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type
of wash.Water and energy consumption refer to the default setting of the programmes; selecting special options or modifying spin
speed or temperature will change the consumption data.
The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that
time (see also “Troubleshooting Guide” in your Instructions for Use).
*
** Reference programmes for Energy Label.
*** Automatic adaptation of programme duration after detection of wash load

Handwash 30 1.0 45 0.40 0:36 -

To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

Temperature

(°C)

ADD DETERGENTS, CLOSE THE DOOR AND
SELECT THE PROGRAMME

Add detergents as indicated on the front page and as
described in the chapter “Detergent and Additives” in
your Instructions for Use.

• Turn the programme selector to the desired
programme and temperature.

• The indication lamp next to “Start/Pause”
button blinks.

• The indication lamp of the predefined spin speed
lights up.

SELECT ANY DESIRED OPTION

Push the button(s) of any option(s) desired - the
respective indication lamp lights up. When the
combination of programme and additional option(s) is
not possible, the indication lights switch off automatically.
Unsuitable combinations of options are deselected
automatically.

“Prewash” button

• Only for heavily soiled loads (for example sand,
granular dirt) sensible. Increases the cycle time
by approximately 15 min.

• Do not use liquid detergent for main wash when
activating the Prewash option.

“Intensive rinse” button

• More water is added and rinse cycle is prologned.

• This option is particularly suitable for areas with very

soft water, washing baby linen and helps people with

Load

(kg)

Water

(l)

“Rinse hold” button

• The laundry remains in the last rinse water without
progressing to the final spin cycle to avoid creasing
and prevent colours from changing.

• This option is particularly recommended for the
programmes “Synthetics”, “Daily load” and
“Delicates”.

• This function is particularly useful if you want to
postpone spinning to a later time, or if you want to
drain only.
Note: The programme stops to “Rinse hold” at
the time the “Rinse hold” light in the programme
sequence indicator is on. The indication lamp next
to the “Start/Pause” button flashes.

• If you select “Rinse Hold” do not leave items to
soak for too long.

Terminate the “Rinse hold” option:

• Press the “Start/Pause” button; the programme
will terminate automatically with the final spin cycle
for the present wash programme.

• If you do not wish to spin the clothes, turn the
programme selector knob to the “Drain”
programme and press the “Start/Pause” button.

“Spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is

cancelled but intermediate spin peaks remain
during the rinse. The water is drained out only.

Energy

(kWh)

without “Rapid”

Approx. programme duration

(hours : minutes)

without “Rapid” with “Rapid”

allergies.

“Rapid” button

• Enables quicker washing by shortening the

programme duration.

• Recommendable for small loads or only lightly

soiled laundry.

START DELAY

The “Start delay” allows to run the machine at the
consumer's convenience, for example at night when
electricity is cheaper. Do not use liquid detergent when
activating the Start Delay.

• Select programme, temperature and options.

• Press the “Start delay” button to select the delay

time by 1, 3, 6, 9 or 12 hours.

• Press the “Start/Pause” button.
The indication next to the “Start delay” button
lights up and goes off when the programme starts.

• Once having pressed the “Start/Pause” button,
the countdown of the time delay begins. When the
programme starts, the start delay indicator light
goes off and is replaced by the programme
sequence indication.

• After the “Start/Pause” button has been pressed,
the number of hours preselected can be reduced
by pressing again the “Start delay” button.

To cancel the “Start delay”
..before you press the “Start/Pause” button:

• Turn the programme selector to another position
or press the “Reset” button.
..after having pressed the “Start/Pause” button:

• Press the “Reset” button for at least 3 second - the
start delay indicator light goes out.

PROGRAMME START

Open the tap and press the “Start/Pause” button.
The indication lamp next to the “Start/Pause” button
lights up.
The programme sequence indicator shows the current
programme phase, running from left to right through
Wash, Rinse, Spin/Drain. When the programme phrase is
finised, the corresponding indication goes out.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp
lights to show the the door can be opened. As long
as a wash programme is running, the door remains
locked and must on no account be forced open.
In case you have an urgent need to open it during a
running programme, refer to “Cancel (Reset)” a running
programme before the end”.

FAILURE INDICATIONS

In case of any failures or irregularities, consult the
“Troubleshooting Guide” in your Instructions for Use.

“Service”

Lighting up of the “Service” indication can be caused by a
fault in an electrical component.

“Water tap closed”

The washing machine has no or insufficient water supply;
the water tap might be closed or the water inlet hose
kinked.

“Clean pump”

Waste water is not pumped out. The drain hose may be
kinked or the filter must be cleaned (see “Cleaning the
filter” in your Instructions for Use).

PROGRAMME END

• All the lights of the programme sequence indicator
are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O”
position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START

1. Press the “Start/Pause” button to pause the
programme. The light flashes.

2. Select the new programme (with temperature),
any options and another spin speed if you want.

3. Press the “Start/Pause” button again. The new
programme continues at the same position where
the previous programme was interrupted.
Do not add detergent for this programme.

CANCEL (RESET) A RUNNING PROGRAMME
BEFORE THE END

The “Reset” button cancels a programme before the
end.

• Press and hold the “Reset” button for a few
seconds. Any existing water is drained out. It may
last some time until the door can be opened.

Ignis is a registered trademark of Whirlpool USA.

5019 501 01024