When you need service, or call
with a question, have this Inform&on
ready.
1 Complete Model ar;d Serial Numbers
[from the plate under the lid near the ~~~~. ._~
hinge].
2. Purchase date from sales sirp (or date
installed)
Copy ti-,ls InformatIon in these
spaces Keep this book in the Laundry
Information Center with your
Guide,
sales slip and warranty
Loundry
I,’ .i. _. r.-
,.-, ] ‘~ .:,e
Before using
your Washer
Please read ihis booklet to be
sure your washer IS instailed and used
properly It will
results and longest life your washer wus
designed to gave
You are personally responsi-
ble for making sure that your
washer...
l
Is Installed by a qualified installer
l
Is properly installed and leveled on a
floor that can support the weight.’
l
Is connected to the right kind of outlet,
electric supply, water supply and drain
l
Is properly electrlcally grounded.
l
Is used only for jobs normally
expected of home automatic washers
l
Is properly maintained
l
Is protected from the weather
l
Is not run by children or anyone
unable to operate It properly.
Remove
Guide label It will be easier to remove
before the washer IS used
You may want to wipe out the
basket with a damp cloth before using
to remove dust from storing or shipping
SPECIAL INSTRUCTIONS: See the
laundry Guide for tips on detergents, other laundry aids and
instructions for washing special
items.
See the lnstallatlon Instructions for
complete informatlon
I
CAUTION: Store laundry detergent and additives in a cool, dry
place where children can’t
reach them.
help you
the Consumer Buy
get the best
Contents
Before Using Your Washer
Loading Your Washer 3
Understanding Your Washer
Using Your Washer
Water Levels and Load Sizes.
Important Detergent Information
Cleaning the Lint Filter 6
For a Pre-Wash
For Rinsing Only
For Spinning Only
CycleOperation
PERMANENT PRESS 8
KNITS GENTLE
REGULARHEAVY ”
1
SOAKCYCLE :‘. 10
If You Need Service or Help
1. Before Calling for Service 10
2. If You Need Service
3. IfYouHaveaProblem .,. 11
2
3
4
5
6
7
7
L
8
” 8
10
11
loading your
Washer ,c
l
Load without packing so items can
move freely for best cleaning and
least wrinkling.
5. Add Diluted Fabric Softener Only
to the Deep Rinse Cycle.
. DO NOT ADD FABRIC SOFTENER TO
THE WASH. Fabric softeners can combine with soap or detergent to make
greasy stains on fabrics.
Understanding
For best washing results and
energy savings, sort the laundry
carefully.
1. Sort the Laundry into loads.
l
Group the laundry into loads that
can be washed and dried together.
See the Laundry Guide for informa-
tion and samples of typical loads.
l
Try to mix large and small items for
best movement in the washer.
2. Measure Detergent; Add to
Washer Basket.
l
See detergent information on page
6 and in Section IV of the Laundry
Guide.
l
Add dry bleach or water condi-
tioner (not fabric softener) if used.
Follow the package directions
carefully.
3. Dilute liquid Bleach Before Adding to the Washer Basket.
l
See the “Laundry Aids”section of
the Laundry Guide for more
information.
4. load the Washer.
l
Spread the load evenly. (Don’t put
all the towels on one side and a few
wash cloths on the other.) An unbalanced load can cause the washer io
shake during spinning.
your Washer
This automatic washer has cycle
settings with different agitation and spin
speeds for different fabric types For
example, the REGULAR
has high agitation and high spin
speeds The PERMANENT PRESS Cycle,
has high agitation speeds, but low spin
speeds
The washer has a
SELECTOR
level to match the size of the load.
You can select the wash water temper-
ature best for the amount of so11 and
fabric type In each load
go Into detail on the “what and why”
of each setting. Read this and the Laun~
dry Guide carefully to get the best
cleaning results
that lets you adjust the water
It has a
Sections In this Use & Care Gude
TEMPERATURE SELECTOR.
HEAVY Cycle
LOAD SIZE
Your automatic uasher IS easy to
use. To make it even easle’ read the
following steps before starting your first
ioad
Start your washer after you put In
detergent, the load, and any other
laundry aids occordlng to InformatIon
on page 3
1. Set the LOAD SIZE SELECTOR.
l
Select the water level that matches
the size of the load See page 5 for
more ~nformatior:
IMPORTANT For the best cleaning
sure the load has enough water for
2. Set the TEMPERATURE SELECTOR.
l
Match the wash water temperature to
the type of fabrics and soils being
washed All rinses are cold
3. Select a Cycle and Start the
Washer.
l
Push the Cycle Control Knob in and
turn It tothe right (clockwise)
l
Stop when the pointer is on thenum~
ber of minutes of washing you want
in the cycle you want.
l
Instructions for which cycles to use for
each fabric type are under the ltd.
l
To start the washer, pull the Cycle
Control Knob out. When the cycle
IS
over, the washer will stop.
l
To stop the washer at any time
during a cycle, push the Control
Knob in.
l
To change a setting,
trol Knob in to stop the washer. Then turn
the Control Knob to the right (clockwlse)
to the setting you want Pull the knob
out to start the washer
l
Pages a- 11 show what happens In
each cycle
Pull It out to restart the washer
push the Con-
Loading...
+ 8 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.