Whirlpool LA5300XM User Manual

I
AUTOMATIC WASHER
~
Large Capacity
Model
.I .’
LA5300XM

Parts and features

‘ZED
SELECTOR
LAUNDRY
INFORMATION
CENTER
/ CYCLE
TEMPERATURE
SELECTOR
/MODEL AND SERIAL
- BASKET
- TUB
FILTER
NUMBER PLATE
(not shown)
AGITATOR
Remove the Consumer Buy Guide label. It will be easier to remove before the washer is used.
You should wipe out the basket with a damp cloth before using to remove
dust from storing or shipping.
Copy your Model and Serial Numbers here
When you need service or call with a
question, have this information ready:
1. Complete Model and Serial Num­bers (from plate underthe lid nearthe hinge).
2. Purchasedatefromsalesslip. Copy this information in these spaces.
Keep this book in the Laundry Informa-
tion Center with your “Laundry Guide,”
sales slip and warranty.
There is no warranty registration to return. Proof-of-purchase is all
that is required for in-warranty service.
2
Model Number
Serial Number
Purchase Date
Service Company/ Phone Number

Your responsibilities

Read this “Use and Care Guide” and your “Laundry Guide” care­fully for important use and safety information.
You are personally responsible for making sure that your washer..
l
is installed by a qualified installer.
l
is properly rnstalled and leveled on a floor that can support the weight.*
l
is connected to the right kind of outlet, electric supply, water supply and drain.-
* is properly grounded.,
l
is used only for jobs normally expected of home automatic washers.
l
is properly maintained.
l
is protected from the weather and kept where the tempera­ture will not fall below freezing.
. is not run by children or anyone
unable to operate it properly
*See the “Installation Instructions”
for complete information.
Contents
PARTS AND FEATURES 2 YOUR RESPONSIBILITIES
SAFETYFIRST . . . . . . . . . . . . . . . . ...3
STARTING YOUR WASHER 4 WHAT HAPPENS IN EACH CYCLE OTHER OPERATING INSTRUCTIONS 8
For a Rinse and Spin For a Drain and Spin For a Soak or Pre-Wash 8 Cleaning the Lint Filter
CARING FOR YOUR WASHER 9
IF YOU NEED SERVICE OR ASSISTANCE 11
1. Before Calling for Assistance 11
2. If You Need Assistance
3. If You Need Service
4. If You Have a Problem 11
01984 Whirlpool Corporation
Page
, 3
6 8
8 8
11 11
-SAVE THESE tNSTRUCTlONS ­3

Starting your washer

Beforestarting
your washer:
Select a Select WATER
1. LOAD SIZE
1. Measure and add detergent.
2. Place sorted load in washer.
3. Start washer.
2.
TEMPERATURES
l
The water level can be set for EX SMALL, MEDIUM or LARGE loads. Select the water level that matches the load size.
See your “Laundry Guide” for
details on load sizes.
l
Match the wash water tem­perature to the type of fabrics and soils being washed.
l
All rinses are cold.
Recommended wash tempera-
tures can be found in your “Laundry Guide”and printed under the washer lid.
LOAD SIZES AND WATER LEVELS
Use less than a full tub of water when you have less than a full load to wash.
For best cleaning results, the load must be able to move freely in the water. Too big a
load or too little water can
tear items.
LARGE (16.9 gals.164.0 L)’
MEDIUM (13.5 gals./51.1 L)’
EX SMALL ( 9.9 gals./37.5 L)’
*Approximate fill with load.
Loading...
+ 8 hidden pages