Whirlpool LA5000XM User Manual

AUTOMIATIC
I WASHER
Large Capacity Model LA5000XM
I
‘wave Ovens. Trash Compactors, Room Air Condltloners. Oehumldlflers Automatic Washers Clothes Oryers Freezers. Refngerator-Freezers

Parts and features

LOAD
LAUNDRY
INFORMATION
TEMPERATURE
i\
SELECTOR
MODEL AND SERIAL
NUMBER PLATE
Remove the Consumer Buy Guide label. It will be easier to remove before the washer is used.
You should wipe out the basket with a damp cloth before using to remove dust from storing or shipping.
Copy your Model and Serial Numbers here
When you need service or call with a
question, have this information ready
I. Complete Model and Serial Num-
bers (from plate under the lid nearthe hinge).
2. Purchase date from sales slip Copy this information In these spaces.
Keep this book in the Laundry Informa­tion Center with your “Laundry Guide,” sales slip and warranty
There is no warranty registration card to return. Proof-of-purchase is
all that is required for in-warranty service.
2
-_
Mode! Number
__
Serial Number
Purchase Date
Serwce Company / Phone Number
._____
--

Your responsibilities

Read this “Use and Care Guide” and Your “Laundry Guide” care­fully for important use and safety information.
You are personally responsible for making sure that your washer...
l
is installed by a qualifiedinstaller.
l
is properly installed and leveled on a floor that can support the weight.’
l
is connected to the right kind of outlet, electric supply, water supply and drain.*
l
is properly grounded.*
l
is used only for jobs normally expected of home automatic washers.
l
is properly maintained.
l
is protected from the weather
and kept where the tempera­ture will not fall below freezing.
l
is not run by children or anyone
unable to operate it properly
*See the “Installation Instructions”
for complete information.
Contents
Page
PARTS AND FEATURES YOUR RESPONSIBILITIES SAFETY FIRST STARTINGYOUR WASHER WHAT HAPPENS IN EACH CYCLE OTHER OPERATING INSTRUCTIONS 8
For a Rinse and Spin For a Drain and Spin
For a Soak or Pre-Wash CARING FOR YOUR WASHER : : : IF YOU NEED SERVICE OR ASSISTANCE
1. Before Calling for Assistance
2. If You Need Assistance : : : 11 3 If You Need Service
4. If You Have a Problem : : : : : 11
\c 1984 Whirlpool Corporation
-SAVE THESE INSTRUCTIONS -
2 3
: 6
8 8
11
11 11

Starting your washer

Before starting your washer:
I. Measure and add detergent
2. Place sorted load in washer.
3. Start washer.
/
Select a
1. LOAD SIZE
l
The water level can be set
EX SMALL or LARGE loads. the water level that matches the load size.
See your”Laundry Guide” for details on load sizes.
for
Select
/
Select WATER
2.
TEMPERATURES
l
Match the wash water tem­perature to the type of fabrics and soils being washed.
l
All rinses are cold.
Recommended wash tempera­tures can be found in your “Laundry Guide” and printed under the washer lid.
LOAD SIZES AND WATER LEVELS
Use less than a full tub of water when you have less than a full load to wash.
For best cleaning results, the load must be able to move freely in the water. Too big a load or too little water can tear items.
LARGE (16.9 gals.164.0 L)*
EX-SMALL (9.9 gals./37.5 L)*
*Approximate fill with load.
Loading...
+ 8 hidden pages