Whirlpool L 524 INSTRUCTION FOR USE

How to use the appliance

Further indications are given in the single chapters and in the user instructions.

Switch on the appliance

How to fill the

detergent dispenser

Check the rinse aid level

Check the regeneration

salt level

Load the racks

Close the dishwasher door,

turn on the water tap

Select a programme

Automatic start by turning the programme selector knob (in case of
retractable knob, first press the knob to access it).

Compartment
With each wash cycle.
Compartment
For programmes with pre-wash only.
If using combined action dishwasher
tabs, follow the user instructions!

Mechanical indicator C.
Electric indicator on control panel (if provided).

On models with water softener
system only.

Mechanical indicator D. Electric
indicator on control panel (if provided).

Refer to the dishwasher loading instructions.

Select the desired programme.
The corresponding indicator lamp comes on.

A:
B:

ABC

Select options

Press the Start button

Wash cycle

Switch off the appliance

Turn off the water tap,

unload the racks

If necessary (and if provided) the corresponding indicator lamp lights up.

The selected programme is
then memorised (even in the
event of power failure).

Only after the START button has switched off: Access the knob (in case of
retractable knob, press and then release the knob).

Warning: when the door is opened steam comes out!

Unload the appliance, starting from the lower rack.

“Change programme in progress”

Press the ST ART button for 2 sec. until
the Start indicator lamp switches off;

Select another programme and
press the START button again.

- Only open the dishwasher if necessary
(Warning: beware of hot steam).

- If the appliance is switched off during a
wash cycle, when switched on again it
will resume the cycle from where it was
interrupted.

Dishwasher loading instructions and racks provided

Upper rack:

Fold down glass holder (A):

Depending on the position, for example small or
long-stemmed glasses.

Crockery holders (B):

Depending on the position, for example plates, cups
and long-stemmed glasses.

Long-handled utensils (e.g. carving forks, knives)
must be arranged with the sharp end facing in
towards the appliance.

Rack height adjustment (also when loaded):

Pull the

Lower adjustment:

Upper adjustment:

The rack must be level on both sides.

outwards and lower

(C)

the rack.
Pull the

upwards until the rack

(C)

clicks into place (factory
setting).

rack handles

two

rack handles

two

Lower rack:

Plate holders

(D)

.

Cutlery basket (E)

The grid
keep items separated.

Sharp knives and forks that might cause injury
must be placed in the cutlery basket with the
sharp end facing downwards.

Only use dishwasher-proof crockery and dishes. Do not use the appliance for items not suitable for
washing in a dishwasher, for example wooden items, aluminium, plastic utensils, tin, hand-decorated
crockery (unglazed), silver cutlery.

can be fitted onto the cutlery basket to

(F)