Whirlpool KWML 8510 INSTRUCTION FOR USE

GB PROGRAMME CHART

5019 701 01001

The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the instructions on the garment label and those issued in this programme chart. M0702

❉: optional / Yes : dosing required

For improved garment care, spin speed is restricted in these programmes.

Do not use liquid detergent when activating the “Start Delay”.

Do not use liquid detergent for the main wash when activating the “Prewash” option.

Programme

Te m p e -

rature

Care

Labels

Max

Load

Ty p e o f w a sh / N ot e s

- Respect the manufacturer’s recommendations on the care label

Detergents and additives Special options Start

delay

Spin

Pre-

wash

Main wash

Softener Pre-

wash

Rinse

hold

Intensive

rinse

Easy

ironing

Clean + Spin Max

Spin

Speed

rpm

Cotton

70 - 95 °C

8.0

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen. At a temperature of 80°C or more, this programme eliminates bacteria, ensuring sanitization of your laundry. The bacteria removal efficiency has been tested following a similar methodology to the NF EN 13697 standard of Nov. 2001.

❉

Ye s

❉❉❉❉ ❉ ❉ ❉ ❉

max.

Cotton 20 - 60 °C

8.0

SuperEco 20 - 60 °C

8.0

Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Offers highest economy in energy consumption by prolonged washing duration. Ideal to be run overnight to additionally profit from the more favourable energy rates. To avoid noise of spinning at night, set spin speed to “0” and start spin programme in the morning, or define programme start with “Start delay” accordingly.

—

Ye s

❉ — ❉❉ ——❉❉

max.

Synthetics

20 - 60 °C

3.5

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

❉

Ye s

❉❉❉❉ ❉ ❉ ❉ ❉

1000

Daily

20 - 60 °C

6.0

Slightly to normally soiled textiles made of cotton and/or synthetics.

—

Ye s

❉ — ❉❉ ❉— ❉❉

max.

Quick wash 20 - 30 °C 6.0

Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton.

—

Ye s

❉ — ❉ ———❉❉

max.

Big Items 20 - 40 °C

3.0

Blankets made of synthetic fibres; bed covers filled with feathers, polyester or other artificial fibres; sleeping bags, bathmats and similar items.

❉

Ye s

❉❉❉❉ ——❉❉

1000

Delicates 20 - 40 °C

2.5

Curtains and delicate clothing, dresses skirts, shirts and blouses.

❉

Ye s

❉❉❉———❉❉

1000

Woo l

20 - 40 °C

2.0

Only woollens, labelled with the Woolmark and identified as machine washable. This programme (40°C) is tested and approved by The Woolmark Company for machine washable wool.

—

Ye s

❉ — ❉ ———❉❉

1000

Handwash/

Lingerie

20 - 40 °C 2.0

Textiles made of silk, linen, wool and viscose marked as “handwashable”. Up to a temperature of 30°C, this cycle is particularly suitable to treat delicate lingerie (use of a laundry net strongly recommended). This programme (40°C) is tested and approved by The Woolmark Company for handwashable wool.

—

Ye s

❉ — ❉ ———❉❉

400

Rinse & Spin

——

8.0

Same as the last rinse and the final spin in the “Cotton” programme.

—— ❉ — ❉❉ ——❉❉

max.

Spin

——

8.0

In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.

—————— ——❉❉

max.

Gentle Spin

——

2.0

In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.

—————— ——❉❉

1000

Drain

———

Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”. Press “Drain/ Reset” and then “Start” to start the “Drain” programme.

—————— ——❉ ——

A. Programme selector B. Display

C. “Temperature” button D. “Spin” button

E. “Start delay” button

F. “Start” button G. “Reset” button

H. “Favourites” button

I. Programme sequence indication

J. “Door open” indication K. “Buttons locked” indication Your washing machine is equipped with

automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.: L. “Water tap closed” indication

M. “Clean pump” indication N. “Service” indication

F C E D

}

501970101001GB:Layout 1 18-08-2008 10:13 Pagina 1

5019 701 01001

Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use. Turn the programme selector to the desired programme. The temperature and spin speed indicated on the display can be altered by pressing the “Temperature” button or the “Spin” button.

When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Clean +” button

• Choose this option if you use an in-wash additive for stain removal (powder, for example “Vanish”) - it will optimize the additive’s efficiency to get better wash performance and stain removal.

• Selectable for programmes “Cotton” and “Synthetics”; choose temperature of 30 or 40°C and use with maximum load.

• Add an appropriate amount of in-wash additive for stain removal (powder) to the main wash chamber, together with your detergent (only use powder detergent with this option). Respect the manufacturer’s dosing instructions.

• Prolongs the programme by approx. 10 to 15 minutes.

• Appropriate for use of stain removers and bleaches on oxygen basis. Chlorine or perborate bleaches must

not be used!

“Easy ironing” button

• Can be used together with “Cotton”, “Synthetics” and “Daily load” programmes to make ironing easier.

• Increases the water quantity and the clothes are spun very gently.

“Prewash” button

• Only for heavily soiled loads (for example sand, granular dirt) sensible. Increases the cycle time by approximately 15 min.

• Do not use liquid detergent for the main wash when activating the Prewash option.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft water or for washing baby linen, and helps people with allergies.

“Rinse hold” button

• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.

• This option is particularly recommended for the programmes “Synthetics”, “Daily load” and “Delicates”.

• It is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.

• If you select “Rinse hold”, do not leave the laundry to soak for too long. Note: The programme stops to “Rinse hold” at the time the “Rinse hold” symbol on the display lights up. The light over the “Start” button flashes.

Terminate the “Rinse hold” option:

• Press the “Start” button; the programme will terminate automatically with the final spin cycle for the present wash programme.

• If you do not wish to spin the clothes, select and start the “Drain” programme.

“Spin” button

• Every programme has a predefined spin speed.

CONSUMPTION DATA

Programme

Te m p e r a t u r e

(°C)

Load

(kg)

Wat er

(l)

Energy

(kWh)

Approx. Programme Duration

(hours : minutes)*

Cotton

95 8.0 82** 2.40 2:10

Cotton*** 60 8.0 69 1.36 2:20 Cotton 40 8.0 77 0.85 2:05

SuperEco 60 8.0 75 0.95 4:00

Synthetics 60 3.5 48** 0.95 1:35 Synthetics 40 3.5 44 0.55 1:20

Daily 40 6.0 79 0.70 1:00

Quick wash 30 6.0 72 0.35 0:30

Big Items 40 3.0 74 0.75 1:30 Delicates 30 2.5 60 0.45 0:50

Wool 40 2.0 60 0.65 0:45

Handwash 40 2.0 45 0.65 0:40

Handwash/Lingerie 30 2.0 45 0.35 0:36

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. * The time indicated on the display can deviate from the values in the table, because it takes into account the household

conditions applicable at that time.

** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out. *** Reference Programme for Energy Label.

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

SELECT ANY DESIRED OPTION

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during rinse. The water is drained out only.

If there is a programme setting which you use frequently, the appliance offers the possibility to save one setting for each programme so that it can be used again by just pushing one button.

• Select the desired programme, temperature, spin speed and option(s), push and hold the “Favourites” button for at least 3 seconds. The lamp next to “Favourites” shortly flashes and then lights up - the programme setting is saved.

Next time you want to use your individual programme setting, select the programme, push the “Favourites” button and start by pushing “Start”.

If you want to replace the saved programme setting by another one:

• Push the programme button, select temperature, spin speed and options as desired and then press and hold the “Favourites” button for at least 3 seconds. The previously saved programme setting will be replaced by the new one.

The “Start Delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper.

• Select programme, temperature, spin speed and options.

• Press the “Start Delay ” button to select the delay time up to 23 hours.

• Press the “Start” button. The countdown of the delay time begins; the clock symbol next to the delay time and the dot between hours and minutes flash.

• The time delay indication disappears when the programme starts and it is replaced by the remaining programme time.

• Once having pressed the “Start” button, the number of hours preselected can be reduced by pressing and holding the “Start Delay” button. From 1 hour on, the delay time can also be reduced by minutes.

To cancel the “Start Delay” ..before you press the “Start” button:

• Select another programme or press the “Reset” button.

..after having pressed the “Start” button:

• Press the “Reset” button for at least 3 seconds - the start delay time disappears from the display.

Open the tap and press the “Start” button. The light over the “Start” button comes on. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain.

Before starting and after end of a programme, the symbol lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.

You can lock the buttons of the control panel against improper use (e.g. by children).

• Press the temperature and the spin speed button simultaneously and hold them for at least 3 seconds. The key symbol on the display lights up.

• To unlock the buttons again: proceed in the same way.

“Water tap closed”

The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”).

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your Instructions for Use; if the fault persists, contact our After Sales Service.

• The symbols of the programme sequence indicator

are dark, and the “Door open” symbol lights up.

1. Turn the programme selector to the “Off/0” poisition.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

1. Press the “Start” button to pause the programme.

The light flashes.

2. Select the new programme, temperature, any options

and another spin speed if you want.

3. Press the “Start” button again. The new programme

continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

The “Reset” button cancels a programme before the end.

•Press the “Reset” button for at least 3 seconds. Any

existing water is drained out before the door can be opened.

SAVE YOUR FAVOURITE PROGRAMMES

START DELAY

PROGRAMME START

“DOOR OPEN” INDICATION

LOCK BUTTONS

RED INDICATIONS ON THE DISPLAY

PROGRAMME END

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

Printed in Italy 08/08

501970101001GB:Layout 1 18-08-2008 10:13 Pagina 2