Whirlpool ART 628/H, KVA 1301/1, KVA 1408, KVA 1309/1, KVA 1301 PRODUCT SHEET

6gb33026.fm5 Page 1 Wednesday, February 28, 2001 5:03 PM

PRODUCT SHEET

GB

A. Refrigerator compartment

Crisper drawer

1.

Shelves / Shelf area

2.

Thermostat control knob/light

3.

Shelves

4.

Rating plate (at the side of crisper

5.

drawer)

Least cold zone
Intermediate temperature zone
Coldest zone

: The number of shelves and type of accessories may vary, depending on the model.

Notes

All shelves and racks are removable.

Important: Refrigerator accessories must not be washed in a dishwasher.

B. Low temperature compartment

Ice cube tray (if provided, inside the

6.

compartment)
Low temperature compartment door.

7.

IGBD F NL E P GR

S N FIN

DK

6gb33026.fm5 Page 2 Wednesday, February 28, 2001 5:03 PM

Refrigerator compartment controls

A.

Light switch cam

B.

Thermostat control
reference

C.

Thermostat knob

D.

Switch (if provided)

E.

Light bulb (max 15 W)

Thermostat set to
Thermostat set to
Thermostat set to
Thermostat set toz:

Recommended thermostat setting: MED/3-4 position.

Optimal performance is obtained at temperatures between +16°C and +32°C for appliances with climatic
class “N” and at temperatures between +10°C and +32°C for appliances with climatic class “SN”.
The climatic class is indicated on the data plate inside the appliance.

Note

: The ambient air temperature, the frequency of door opening and the position of the appliance can
affect the internal temperatures of the refrigerator. These factors must be taken into account when setting
the thermostat.

Removing the light bulb

To remove the light bulb, unscrew it anticlockwise (see figures).

Posizioning the appliance under the
worktop

The appliance can be installed under a
worktop (worktop height 850 mm from floor).
Proceed as follows:

•

First loosen the rear “A” and front “B”
screws; then remove the appliance top

Fig.1

(

).

•

Make a vent outlet on the worktop (

•

Push the appliance under the worktop and
secure at the front with the same screws
“B” used for the top.

Observe the distance from the rear wall
indicated in (

MIN/1-2: minimum
MED/3-4:medium
MAX/5-7:maximum

Fig. 2

)

refrigeration.

refrigeration.

refrigeration.

no refrigeration, no light.

Fig. 2

).

FIG. 1

FIG. 2

5019 602 33026

GBD F NL E P GR

I

S N FIN

DK

Printed in Italy 02/01