Whirlpool GSXP 7558, PDT 938 INSTRUCTION FOR USE
PDT 938GB
A. “On/Off” Button
A
During the selected washing programme the
programme selector knob moves by steps
clockwise through the phases
rinse and spin
to several minutes.
❉
: optional / Yes: dosing required
1) For improved garment care spin speed is restricted to 0
rpm in this programme.
. Each step takes from some seconds
prewash, main wash
,
Programme
Cotton
with prewash
Synthetics
with prewash
Delicates
with prewash
Cotton
Cotton
short
Synthetics
Synthetics
short
Delicates
Wool
Silk
Rinse + spin —
Spin — In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.
Care
Labels
Heavily soiled, long wearing and temperature stable textiles in cotton and linen (bed linen, table
linen, underwear, shirts etc.).
Heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon,
Nylon) or blends with cotton.
Heavily soiled curtains and delicate clothing, dresses skirts, shirts and blouses.
Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton
and linen.
Slightly soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.
Slightly to normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide
(Perlon, Nylon) or blends with cotton.
Slightly soiled overalls and sports wear made of cotton, polyester, polyamide and blends with cotton.
Curtains and delicate clothing, dresses skirts, shirts and blouses.
Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.
If you select “Rinse Hold” do not leave items to soak for too long.
Textiles made of linen, silk, wool and viscose marked as “handwashable”.
If you select “Rinse Hold” do not leave items to soak for too long. No spinning.
With this programme you can add starch and/or fabric softener.
The programme ends with an intensive spin cycle.
Type of wash / Notes
Max
Load
Kg
4.5
2.5 —
1.5 —
5.0
3.0
2.5 —
2.5 —
1.5 —
1.0 —
1.0 —
5.0 —
5.0 — — — —
Detergents and additives Special options Temperature
Bleach Softener Main
❉❉
❉❉
❉❉
❉
❉
❉
❉
❉
❉
❉
❉
Wash
Yes Yes
Yes Yes
Yes Yes
Yes —
Yes —
Yes —
Yes —
Yes —
Yes —
Yes —
——
Pre-
wash
Spin Speed
Reduction
Half Load Rinse
Hold
❉❉❉
❉❉❉
❉
—
❉
❉❉❉
❉❉❉
❉❉❉
❉❉❉
—
—
—
❉
❉
❉
—
❉
❉
1)
❉❉❉
❉
———
Selector
°C
Max. 95°
Max. 60°
Max. 40°
Max. 95°
Max. 60°
Max. 60°
Max. 60°
Max. 40°
Max. 40°
Max. 30°
—
Programme
Selector
1
2
3
4
5
6
7
8
9
10
Gentle spin — In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.
Drain —
Drain only - no spinning. Alternative method of terminating programme the synthetic, delicate and wool
programme and for premature removal of the laundry.
1.5 — — — —
—— ——— — — — —
❉
———
5019 801 10005
CONSUMPTION DATA
Temper atu re
Programme
Cotton 95 4.5 55 1.70 2:05
Cotton 60 5.0 55 0.95 2:20
Cotton 40 4.5 44 0.60 2:05
Synthetics 60 2.0 55 0.80 1:30
Synthetics 40 2.0 55 0.60 1:20
Delicates 30 1.5 60 0.50 0:45
Wool 30 1.0 60 0.30 0:40
Silk 30 1.0 60 0.30 0:50
Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized
conditions in compliance with Standard IEC 60 456. Consumption data in the home may vary with respect to the values in the
table in relation to the water supply pressure and temperature, the load and the type of wash.
ADD DETERGENTS, CLOSE THE DOOR AND
SELECT THE PROGRAMME
Add the detergents as described in the programme
table or in the chapter “Detergents and Additives” in
the booklet.
1. Open the tap.
2. Set the programme selector to the desired
programme.
3. Set the temperature selector to the desired
temperature.
4. Special options can be selected.
5. Check that the door is well closed and turn on the
washing machine by pressing the “ON/OFF”
button.
Selector
(°C)
Load
(kg)
Water
(l)
SELECT ANY DESIRED OPTION
“Spin Speed Reduction” button
• Reduces the predetermined automatic maximum
spin speed.
In some programmes the maximum final spin
speed is limited to go easy on your laundry items.
Selection of a higher spin speed is not possible.
“Half Load” button
• Reduces water consumption, above all during rinsing.
• Suitable for lightly-soiled laundry and small loads
(max 3 kg).
Note: Reduce the detergent quantity.
Energy
(kWh)
Approx.
Programme
Duration
(hours : minutes)
“Rinse Hold” button
• The laundry remains in the last rinse water
without progressing to the final spin cycle to
avoid creasing and prevent colours from
changing.
• This option is particularly recommended for the
programme “Synthetics” or “Delicates”.
• This function is particularly useful if you want to
postpone spinning to a later time, or if you want
to drain only.
Terminate the “Rinse Hold” option:
• Press the “Rinse Hold” button again; the
programme will terminate automatically with
the final spin cycle for the present wash
programme.
If you do not wish to spin the clothes, turn the
programme selector knob to the “Drain”
programme.
PROGRAMME CHANGE
To reselect a programme when a cycle has already
begun:
1. Switch off the appliance by pressing the
“ON/OFF” button.
2. Select the new programme.
3. Start the programme by pressing the
“ON/OFF” button.
PROGRAMME END
1. At the end of the programme the programme
selector moves to the stop position.
2. To unload the machine wait for the door to
unlock (about 1 minute).
3. Switch off the appliance, open the door and
take out the laundry.
4. Close the tap and leave the door ajar to allow
the drum to dry out.
NOTES AND INDICATIONS FOR USE
• WATER LEVEL
It may not be visible as the cycle is optimised
for a minimum water consumption without
compromising washing results.
• SPIN SPEED CONTROL
Spin speed may be reduced automatically or
may even be excluded in the case of small
loads with highly absorbent garments (e.g.
bathrobes, bathmat).
This control avoids cloth and machine damage
and excessive vibrations and consequent noise
produced by the machine due to load
unbalance: by selecting high spin speeds the
noise level increases.
• MOTOR NOISE
The running noises of the new, electronicallycontrolled motor are not the same as the
ones you are used to from your old appliance.
Don’t be surprised - modern technology has a
modern sound.
• CLEANING THE FILTER
To ensure an impeccable function of the
pump, check the filter regular and clean it if
necessary.
5019 801 10005
Loading...