Whirlpool AWM 1204/4, GSXK 7451/3 INSTRUCTION FOR USE
3gb05565a.fm Page 1 Tuesday, February 10, 2004 11:40 AM
AWM 1204/4GB PROGRAMME CHART
A. “On/Off” Button
A
During the selected washing programme the
programme selector knob moves by steps clockwise
through the phases
Each step takes from some seconds to several
minutes.
❉
: optional / Yes : dosing required
1)
For improved garment care spin speed is restricted to
900 rpm in this programme.
2)
For improved garment care spin speed is null in this
programme.
prewash, main wash, rinse and spin
.
Programme
Cotton 95°
with prewash
Synthetics 60°
with prewash
Delicate 40°
with prewash
White Cotton 95°
White Cotton 60° Slightly soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.
Coloured
Cotton 40°
Colour
Synthetics 60°
Acrylics/
Synthetics 40°
Delicate 40° Curtains and delicate clothing, dresses skirts, shirts and blouses.
Wool 40°
Silk 30°
Rinse and spin
Fast Spin
Slow spin
Drain
Care
Labels
—
—
—
—
Type of wash/Notes
Heavily soiled, long wearing and temperature stable textiles in cotton and linen (bed linen, table linen,
underwear, shirts etc.).
Heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen, Tre vira), polyamide (Perlon, Nylon) or
blends with cotton.
Heavily soiled curtains and delicate clothing, dresses skirts, shirts and blouses.
Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.
If you select “Quick Wash”, washing temperature is 60°.
When you select “Quick wash” option, the “Intensive rinse” option cannot be selected
Slightly soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.
Slightly to normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (P erlon,
Nylon) or blends with cotton.
When you select “Quick wash” option, the “Intensive rinse” option cannot be selected
Slightly soiled overalls and sports wear made of cotton, polyester, polyamide and blends with cotton.
Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.
If you select “Rinse Hold” do not leave items to soak for too long.
Textiles made of linen, silk, wool and viscose marked as “handwashable”.
If you select “Rinse Hold” do not leave items to soak for too long. No spinning.
With this programme you can add starch and/or fabric softener.
The programme ends with a fast spin cycle.
In this programme spinning is fast. Same as the spin cycle in the “Cotton” programme.
In this programme spinning is slow. Same as the spin cycle in the “Wool” programme.
Drain only - no spinning. Alternative method of terminating programme the synthetic, delicate and wool programme
and for premature removal of the laundry.
.
.
Max
Load
Kg
5.0
2.5
1.5
Normal
5.0
Quick Wash
3.0
5.0
5.0
Normal
2.5
Quick Wash
1.5
2.5
1.5
1.0
1.0
5.0
5.0 — — — — — — 1200
1.5 — — — — — —
————————
Detergent and additives Special options Spin Speed
Softener Main
❉
❉
❉
❉
❉
❉
❉
❉
❉
❉
❉
❉
Wash
Yes Yes
Yes Yes
Yes Yes
Yes —
Yes
Yes
Yes —
Yes
Yes
Yes
Yes
———
Pre-
wash
Quick
Wash
—
—
—
Half
Load
❉❉
❉❉
—
❉❉❉
——
——
❉❉
❉❉
❉❉❉
———
———
———
———
❉❉
Whirlpool is a registered trademark of Whirlpool USA.
Rinse
Hold
rpm max
❉
❉
❉
❉
❉
Selector
Knob
1200
900
900
1200
1200
1200
900
900
900
900
—
1200
900
5019 301 05565/A
1)
1)
1)
1)
1)
1)
1)
Programme
Selector
1
2
3
4
5
6
7
8
9
10
2)
11
A
B
C
D
Black process 45.0° 100.0 LPI
3gb05565a.fm Page 2 Tuesday, February 10, 2004 11:40 AM
CONSUMPTION DATA
Load
Programme
(kg)
Water
(l)
Energy
(kWh)
Approx.
Programme
Duration
(hours:minutes)
Cotton 95° 5.0 49 1.70 2:05
Cotton 60° 5.0 44 0.95 2:05
Cotton 40° 5.0 44 0.60 2:10
Synthetics 60° 2.5 55 0.80 1:35
Synthetics 40° 2.5 55 0.60 1:25
Delicate 40° 1.5 60 0.60 0:50
Wool40° 1.0 60 0.45 0:45
Silk 30° 1.0 60 0.30 0:45
Prewash cycle might increase programme duration. Consumption values were measured in normalized conditions in
compliance with Standard IEC 60 456.
Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and
temperature, the load and the type of wash.
ADD DETERGENTS, CLOSE THE DOOR AND
SELECT THE PROGRAMME
Add the detergent as described in the programme
table or in the chapter “Detergents and Additives” in
the booklet.
1. Open the tap.
2. Set the
programme selector
to the desired
programme.
3. Set the
spin speed selector knob
to the desired
speed.
Special options
4.
can be selected.
5. Check that the door is well closed and turn on the
washing machine by pressing the
“ON/OFF”
button.
SELECT ANY DESIRED OPTION
“Quick Wash” button
• For quick, economical washes.
• Ideal for minimum loads of lightly-soiled articles.
Note:
reduce the detergents quantity.
“Half Load” button
• Reduces water consumption, above all during rinsing.
• Suitable for lightly-soiled laundry and small loads
(max 3 kg).
Note:
•
Reduce the detergent quantity.
“Rinse Hold” button
• The laundry remains in the last rinse water
without progressing to the final spin cycle to avoid
creasing and prevent colours from changing.
• This option is particularly recommended for the
programme “Synthetics” or “Delicates”.
• This function is particularly useful if you want to
postpone spinning to a later time, or if you want to
drain only.
Terminate the “Rinse Hold” option:
• Press the “Rinse Hold” button again; the
programme will terminate automatically with
the final spin cycle for the present wash
programme.
•
If you do not wish to spin the clothes, turn the
programme selector knob counterclockwise to
the “Drain” programme
.
PROGRAMME CHANGE
To reselect a programme when a cycle has already
begun:
1. Switch off the appliance by pressing the
ON/OFF
“
” button.
2. Select the new programme.
3. Start the programme by pressing the
ON/OFF
“
” button.
PROGRAMME END
1. At the end of the programme the programme
selector moves to the stop position.
2. To unload the machine wait for the door to
unlock (about 1 minute).
3. Switch off the appliance, open the door and
take out the laundry.
4. Close the tap and leave the door ajar to allow
the drum to dry out.
NOTES AND INDICATIONS FOR USE
WATER LEVEL
•
It may not be visible as the cycle is optimised
for a minimum water consumption without
compromising washing results.
SPIN SPEED CONTROL
•
Spin speed may be reduced automatically or
may even be excluded in the case of small
loads with highly absorbent garments (e.g.
bathrobes, bathmat).
This control avoids cloth and machine damage
and excessive vibrations and consequent noise
produced by the machine due to load
unbalance: by selecting high spin speeds the
noise level increases.
MOTOR NOISE
•
The running noises of the new, electronicallycontrolled motor are not the same as the
ones you are used to from your old appliance.
Don’t be surprised - modern technology has a
modern sound.
CLEANING THE FILTER
•
To ensure an impeccable function of the
pump, check the filter regular and clean it if
necessary.
Black process 45.0° 100.0 LPI
Whirlpool is a registered trademark of Whirlpool USA.
5019 301 05565/A
Loading...