Whirlpool GSV 680, AWO 3511 INSTRUCTION FOR USE

3gb05538.fm Page 1 Monday, December 1, 2003 3:36 PM

GB AWO 3511 PROGRAMME CHART

This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

A.“Water Tap Closed” indication

B.“Clean Pump” indication

C.“Door Locked” indication

					D.	Programme selector knob
					E.	Programme sequence indication
A			C		F.	“Start/Pause” button
					G.	“Start/Pause” indication
B					H.	“Start Delay” button
E					I.	“Start Delay” indication/“Remaining
						Time” display
					J.	“Reset” button
					K. “Spin Speed” button
					Selecting any option the indication lights up.
D	F G	HI	J	K	When the combination of programme,
					additional options and temperature is not
					possible, the indication lights switch off
					automatically. Unsuitable combinations of
					options are deselected automatically.

														Detergents and additives											Special options					Max
					Care								Max Load	Softener				Main			Pre-		Start	Easy	Prewash	Intensive		Rinse	Spin Speed	Spin
	Programme											Type of wash/Notes					Wash			wash			Delay	Ironing		Rinse		Hold	Reduction	Speed
			Labels
													Kg										Départ	Anti-	Prelavage	Rinçage		ACP	Essorage	rpm
																							retardé	froissage		plus			Variable
												Normally to heavily soiled bed linen, table linen and underwear, towels, shirts
	Cotton											etc. made of cotton, coloured cotton and linen.	5.0					Yes												1200
												For temperature selection, please respect the manufacturer's recommendation
	Coton
												on the care label.
												With heavily soiled laundry the additional “Prewash” option can be selected as well.
	Synthetic											Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira),	2.5					Yes											1)	800 1)
	Synthétique											polyamide (Perlon, Nylon) or blends with cotton.
	Daily											Slightly to normally soiled textiles made of cotton and/or synthetics.	3.0					Yes			—				—					1200
	Superrapid											Shortly worn outer clothing made of cotton, polyester, polyamide and blends with	3.0					Yes			—				—					1200
	Chrono											cotton.
	Delicates											Curtains and delicate clothing, dresses skirts, shirts and blouses.	1.5					Yes						—		—			1)	800 1)
	Délicat
	Wool											Only woollens with a felt-free finish, labelled with the woolmark and identified as	1.0					Yes			—			—	—	—			1)	800 1)
												machine washable.
	Laine
												If you select “Rinse Hold” do not leave items to soak for too long.
	Handwash											Textiles made of linen, silk, wool and viscose marked as “handwashable”.	1.0					Yes			—			—	—	—			—	400 2)
												If you select “Rinse Hold” do not leave items to soak for too long. A very gentle spin is used
	Lavage main
												in this programme.
	Rinse + Spin						—					Same as the last rinse and the final spin in the “Cotton” programme.	5.0					—			—				—					1200
	Rinçage & Essorage
	Spin						—					In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.	5.0		—			—			—			—	—	—		—		1200
	Essorage
	Gentle Spin						—					In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.	1.5		—			—			—			—	—	—		—	1)	800 1)
	Essorage doux
	Drain						—					Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”.	—		—			—			—		—	—	—	—		—	—	—
	Vidange
: optional / Yes : dosing required																										Whirlpool is a registered trademark of Whirlpool USA
1) For improved garment care spin speed is restricted to 800 rpm in this programme.
																												5019 301 05538
2)	In this programme default spin speed can be increased till 400 rpm.

Black process 45.0° 100.0 LPI

3gb05538.fm Page 2 Monday, December 1, 2003 3:36 PM

CONSUMPTION DATA

	Temperature	Load	Water	Energy	Approx.
Programme					Programme
					Duration
	(°C)	(kg)	(l)	(kWh)
					(hours : minutes)*
Cotton	95	5.0	49**	1.90	2:00
Cotton	60	5.0	44	0.95	2:20
Cotton	40	4.5	44	0.60	2:05
Synthetic	60	2.5	55	0.80	1:30
Synthetic	40	2.5	55	0.60	1:20
Daily	40	3.0	45	0.50	1:00
Superrapid	30	3.0	37	0.40	0:30
Delicates	30	1.5	60	0.50	0:45
Wool	30	1.0	60	0.30	0:40
Handwash	30	1.0	45	0.30	0:40

Prewash cycle might increase programme duration. Consumption values were measured in normalized conditions in compliance with Standard IEC 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

*The remaining time indicator can similarly deviate from the values in the table, because it takes into account the household conditions applicable at that time.

**To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add the detergent as described in the programme table or in the chapter “Detergents and Additives” in the booklet.

1.Turn the programme selector knob to the desired programme and temperature.

2.The remaining time display shows the duration of the chosen programme (in hours and minutes) and after taking some seconds for calculating, the indication of the “Start/Pause” button is flashing.

3.The programme sequence and the predefined spin speed indication corresponding to the selected programme lights up.

SELECT ANY DESIRED OPTION

Selecting any option the indication lights up. When the combination of programme, additional

options and temperature is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Easy Ironing” button

•Can be used together with “Cotton”, “Synthetic” and “Daily” programmes to make ironing easier.

•Increases the water quantity and the clothes are spun very soft.

“Prewash” button

•Only for heavily soiled loads (for example sand, granular dirt) sensible. The cycle time increases approximately 15 min.

“Intensive Rinse” button

•More water and a longer time in rinse cycle is added.

•This option is particularly suitable for areas with very soft water, washing baby linen and helps people with allergies.

“Rinse Hold” button

•The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.

•This option is particularly recommended for the programme “Synthetic”, “Daily” and “Delicates”.

•This function is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.

Note: The programme stops to “Rinse Hold” at the time the “Rinse Hold” light in the programme sequence indication is on.

Terminate the “Rinse Hold” option:

•Press the “Rinse Hold” button again; the programme will terminate automatically with the final spin cycle for the present wash programme.

•If you do not wish to spin the clothes, turn the programme selector knob counterclockwise to the “Drain” programme and press the

“Start/Pause” button again when the indication next to it is flashing.

“Spin Speed” button

•Every programme has an automatic predefined maximum spin speed.

•Press the button to set another spin speed.

•If the spin speed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during rinse. The water is drained out only.

START DELAY

The “Start Delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper.

•Press the “Start Delay” button to select the delay time by 1 to 23 hours;

•Press the “Start/Pause” button.

The indication next to the “Start Delay” button lights up and goes off when the programme starts.

•The time delay indication disappears when the programme starts and it is replaced by the remaining time.

•The number of hours preselected can later be reduced pressing again the “Start Delay” button.

To cancel the “Start Delay”

..before you press the “Start/Pause” button:

•Turn the programme selector to the “Off/0” position.

•Reselect the desired programme and options and press “Start/Pause” button to start the programme.

..after having pressed the “Start/Pause” button:

•Press the “Reset” button for at least 3 seconds - the start delay time disappears from the remaining time display, then

•either start the chosen programme by pressing the “Start/Pause” button twice

•or turn the programme selector knob to the “Off/0” position and choose another programme.

PROGRAMME START

Open the tap and press the “Start/Pause” button. The indication next to the “Start/Pause” button lights up. The indications show the sequence reached in the programme. After starting the programme, the sequence indication runs from left to right through Wash, Rinse, Spin.

When the sequence of the programme is finished the corresponding indication goes out.

RED INDICATIONS

“Water Tap Closed”

The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

“Clean Pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”).

“Door Locked”

As long as a washing programme is running, the lamp lights up to show that the door cannot be opened. When the indication goes off, the door can be opened again.

PROGRAMME END

•The remaining time is on “0:00” and all the lights of the programme sequence indication are off.

1.Turn the programme selector to the “Off/0” position.

2.Close the water tap.

3.Open the door and unload the machine.

4.Leave the door ajar to allow the drum to dry out.

CHANGE THE PROGRAMME, OPTIONS AFTER PROGRAMME START

1.Press the “Start/Pause” button to pause the programme. The light flashes.

2.Select the new programme (with temperature), any options and another spin speed if you want.

3.Press the “Start/Pause” button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

CANCEL (RESET) A RUNNING

PROGRAMME BEFORE THE END

The “Reset” button cancels a programme before the end.

•Press the “Reset” button for at least 3 seconds. Any existing water is drained out before the door can be opened.

Whirlpool is a registered trademark of Whirlpool USA

5019 301 05538

Black process 45.0° 100.0 LPI