Whirlpool GST9630P, GST9679P, GSW9800P, LBR4132P, LBR5432P Dimension Guide
...
®
Automatic Washer
PRODUCT MODEL NUMBERS
GST9630P |
LSN2000P |
LSR7010P |
GST9679P |
LSQ8000L |
LSR7133P |
GSW9800P |
LSQ9010P |
LSR7300P |
LBR4132P |
LSQ9030P |
LSR7333P |
LBR5432P |
LSQ9110P |
LSR8010P |
LSB6000P |
LSQ9200P |
LSR9434P |
LSB6200P |
LSQ9549P |
LSW9700P |
LSB6300P |
LSQ9550P |
LSW9750P |
LSB6500P |
LSQ9560P |
LXR7244P |
LSC5000P |
LSQ9659P |
|
LSC9000P |
LSQ9660P |
|
LSN1000P |
LSR5132P |
|
Electrical: A 120-volt, 60-Hz., AC-only, 15or 20-amp, fused electrical supply is required. A time-delay fuse or circuit breaker is recommended. It is recommended that a separate circuit serving only this appliance be provided.
RECESSED AREA AND CLOSET INSTALLATION
The dimensions shown are for the recommended spacing allowed (A and B), except the closet door ventilation openings. The dimensions shown for the closet door ventilation openings (C) are the minimum required.
3"
|
|
|
14"max. |
(7.6cm) |
|
|
|
(35.6cm) 48in.2 |
|
19" |
|
|
(310cm2 ) |
|
|
|
|
|
|
(48.3cm) |
|
|
|
|
|
|
|
24in.2 |
3" |
|
|
|
(155cm2 ) |
|
|
|
|
|
(7.6cm) |
0" |
27" |
0" |
1" 25¹⁄ " 4" |
|
(0cm) |
(68.6cm) |
(0cm)(2.5cm)(64.8cm) (10.2cm) |
|
|
|
A |
|
B |
C |
A.Front view
B.Side view
C.Closet door with vents
DRAIN SYSTEM OPTIONS
Standpipe drain system - wall or floor (views A & B)
The standpipe drain requires a minimum diameter standpipe of 2" (5 cm). The minimum carry-away capacity can be no less than 17 gal. (64 L) per minute. A 1-1/4" (3.2 cm) diameter to 1" (2.5 cm) diameter standpipe adapter kit is available.
The top of the standpipe must be at least 39" (99 cm) high and no higher than 96" (244 cm) from the bottom of the washer.
Laundry tub drain system (view A)
The laundry tub needs a minimum 20 gal. (76 L) capacity. The top of the
laundry tub must be at least 39" (99 cm) above the floor and no higher than 96" (244 cm) from the bottom of the washer.
Floor drain system (view B)
The floor drain system requires a siphon break that may be purchased separately.
The siphon break must be a minimum of 28" (71 cm) from the bottom of the washer. Additional hoses might be needed.
39" |
39" |
28" |
|
(71 cm) |
|||
(99 cm) |
|||
|
(99 cm) |
|
A B A B
Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation |
Ref. 3958075 |
Instructions packed with product. Specifications subject to change without notice. |
03-31-06 |
Loading...