Whirlpool GSN 160 WS, GSN 180 WS INSTRUCTION FOR USE
501961402010_COVER_GB:Layout 1 4-04-2011 11:20 Pagina 1
Manual for Installation, Use and Maintenance
*\Z[VTLY*HYL+LWHY[TLU[;OL.YV\W3[K/HYI`9VHK3HUNHY5V[[PUNOHTZOPYL5. /@
; : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www.cda.eu
61433002GB.fm Page 13 Thursday, March 24, 2005 3:23 PM
INSTRUCTIONS FOR USE
HOW TO USE THE FREEZER
HOW TO DEFROST AND CLEAN THE FREEZER
TROUBLESHOOTING GUIDE
AFTER-SALES SERVICE
INSTALLATION
ELECTRICAL CONNECTION
3
61433002GB.fm Page 16 Thursday, March 24, 2005 3:23 PM
HOW TO USE THE FREEZER
The freezer can be used for storing already frozen food and
for freezing fresh food. The amount of fresh food (in kg)
that can be frozen in 24 hours is indicated on the appliance
data plate. The freezer can operate at ambient
temperatures between +10°C and +32°C. Optimal
performance is obtained at temperatures between +16°C
and +32°C.
Switching on the freezer for the first time
There is no need to set the freezer temperature on the
•
thermostat because the appliance is already factory set.
Plug in the appliance. The green LED (indicating that the
•
appliance is ON) and the red LED will light up, and on some
models also the acoustic alarm (if provided) will sound after
about 1 minute, indicating that the freezer has not yet reached
a sufficiently cold temperature for storage of foodstuffs.
To mute the acoustic alarm press the fast freeze button; the
•
yellow LED will light up.
Deactivate the fast freeze function when the red LED goes out.
•
Adjusting the thermostat
Select the freezer compartment temperature using the
thermostat knob:
= Minimum freezing power
1
= Maximum freezing power
4
Ambient air temperature, the frequency of door opening and the
amount of food to freeze can affect the freezer temperature
adjustments.
We therefore recommend starting with a medium
temperature setting 2 - 3.
Function of LEDs and acoustic alarm (if present)
The green LED indicates whether the appliance is ON.
The red LED (and the acoustic alarm on some models) indicates
that the internal temperature of the appliance is not suitable for
storing food.
This occurs:
After switching on the appliance.
•
When the appliance is switched on again after defrosting and
•
cleaning operations.
When too much fresh food is placed in the freezer.
•
When the door is not closed properly.
•
When the cooling system is faulty (see “Troubleshooting
•
guide”).
When the thermostat is set to higher values (lower
•
temperatures).
The yellow LED indicates that the fast freeze function is activated.
When it is selected, it also mutes the acoustic alarm (on some
models only).
Freezers with door contact rod
The acoustic alarm sounds when the door has been left open for
more than 1 minute. The alarm stops when the door is closed. If it
is necessary to leave the freezer door open for more than 1
minute (e.g. to rearrange food in the drawers), the alarm can be
deactivated by pulling the rod (see figure).
4
Loading...