Whirlpool GSFS 6420 WS INSTRUCTION FOR USE

How to use the appliance

CBA

Further indications are given in the single chapters and in the user instructions.

Switch on the appliance

How to fill the

detergent dispenser

Check the

rinse aid level

Check the regeneration

salt level

Load the racks

Close the door,

turn on the water tap

Select a programme

Press the ON/ OFF button.

Compartment
With each wash cycle.
Compartment
For programmes with pre-wash only.
If using combined action dishwasher
tabs, follow the user instructions!

Mechanical indicator C.
Electric indicator on control panel (if provided).

On models with water softener system only.

Mechanical indicator D.
Electric indicator on control panel (if provided).

Refer to the dishwasher loading instructions.

The last programme selected will light up.
Select the desired programme (using the specific button or
knob). The corresponding indicator lamp lights up.

A:
B:

Select additional

options

Press the START button

Wash cycle

Switch off the appliance

Shut off the water tap,

unload the racks

If necessary (and if provided) the corresponding indicator
lamp lights up.

The selected programme
is then memorised (even
in the event of power
failure).

Only after the START button has switched off: Press the
ON /

Warning: when the door is opened steam comes out!

Unload the appliance, starting from the lower rack.

button. All the indicator lamps switch off.

OFF

“Change programme in progress”

Press the START button for 2 sec. until
the Start indicator lamp switches off;
Select another programme and

press the START button again.

- Only open the dishwasher if necessary
(Warning: beware of hot steam).

- If the appliance is switched off during
a wash cycle, when switched on
again it will resume the cycle from
where it was interrupted.

Dishwasher loading instructions and racks provided

Upper rack:

Multi-purpose support (A) 1):

Depending on the position, for
long-handles utensils, cups and
glasses. May be used in three
different positions.

Crockery holders (B):

Depending on the position, for
example plates, cups and
long-stemmed glasses.

Revolving glass support (C) 2):

Depending on the position, for
example small or long-stemmed
glasses.

Long-handled utensils (e.g.
carving forks, knives) must be
arranged with the sharp end
facing in towards the appliance.

Half Load:

Load the upper rack (see
description of Options).
Place the cutlery basket (D) in the
upper rack.

Rack height adjustment (also
when loaded):

•

Lower adjustment:

the
(E) and lower the rack.

•

Upper adjustment:

handles (E) upwards until the rack
clicks into place (Factory setting).

The rack must be level on both
sides.

Removing the top rack to
provide clearance for large
items of crockery in the
bottom rack:

Open the rack guide retainers (F)
on the right and left and remove
the top rack.
When the upper rack is in place the
retainers must always be closed.

rack handles outwards

two

pull out

pull the

two

depending on the model

Retainer

closed

F

Retainer

F

open

Lower rack:

Depending on the model with fixed
or tilting plate holders (G).

Half Load:

Load the lower rack (see
description of Options).

Greater washing power,
particularly for plates and
saucepans.

Cutlery basket (J) or (H):

Some models are provided with a grid
(I) that can be fitted onto the cutlery
basket to keep items separated.
Cutlery basket (D), if provided, for
appliances with half load only.

Sharp knives and forks that
might cause injury must be
placed in the cutlery basket with
the sharp end facing downwards.

Only use dishwasher-proof crockery and dishes. Do not use the appliance for items not suitable for washing in
a dishwasher , for example wooden items, aluminium, plastic utensils, tin, hand-decorated cr ockery (unglazed),
silver cutlery.
Spare parts which are sold separately:

1)

Multi-purpose support (A) - N. AMH 369.

2)

Revolving glass support (C) - N. WGH 1000.