Whirlpool GS6NHAXVY00, GS6NHAXVT00, GS6NHAXVS01, GS6NHAXVQ01, GS6NHAXVB03 Owner’s Manual

THANK YOU for purchasing this high-quality product. If you should experience a problem not covered in TROUBLESHOOTING,
please visit our website at www.whirlpool.com for additional information. If you still need assistance, call us at 1-800-253-1301.

In Canada, visit our website at www.whirlpool.ca or call us at 1-800-807-6777.
You will need your model and serial number located on the inside wall of the refrigerator compartment.

Para obtener acceso a "lnstrucciones para el usuario del refrigerador" en espa_ol, o para obtener informaci6n adicional acerca de
su producto, visite: www.whirlpool.com.

Tenga listo su nOmero de modelo completo. Puede encontrar su nt3merode modelo y de serie ubicados en la pared interior del
compartimiento del refrigerador.

Tableof Contents/Tabledes mati res

REFRIGERATOR SAFETY ..................................................................... 1

INSTALLATION INSTRUCTIONS ......................................................... 2

REFRIGERATOR USE ........................................................................... 5

REFRIGERATOR CARE ....................................................................... 10

TROUBLESHOOTING .......................................................................... 11

ACCESSORIES .................................................................................... 13

WATER FILTER CERTIFICATIONS .................................................... 13

PERFORMANCE DATA SHEETS ........................................................ 14

WARRANTY .......................................................................................... 16

SI_CURITE DU REFRIGERATEUR ..................................................... 17

INSTRUCTIONS D'INSTALLATION ................................................... 18

UTILISATION DU REFRIGI_RATEUR ................................................. 21

ENTRETIEN DU RI_FRIGI_RATEUR ................................................... 26

DEPANNAGE ........................................................................................ 27

ACCESSOIRES .................................................................................... 29

FEUILLES DE DONNC:ES SUR LA PERFORMANCE ........................ 30

GARANTIE ............................................................................................ 32

REFRIGERATOR SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately/
follow instructions.

You can be killed or seriously injured if you don't follow

instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

W10162458A

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury when using your refrigerator, follow these basic precautions:

• Plug into a grounded 3 prong outlet.

• Do not remove ground prong.

• Do not use an adapter.

• Do not use an extension cord.

• Disconnect power before servicing.

• Replace all parts and panels before operating.

• Remove doors from your old refrigerator.

• Use nonflammable cleaner.

• Keep flammable materials and vapors, such as gasoline,
away from refrigerator.

• Use two or more people to move and install refrigerator.

• Disconnect power before installing ice maker (on ice maker

kit ready models only).

• Use a sturdy glass when dispensing ice (on some models).

SAVE THESE INSTRUCTIONS

Proper Disposal ofYour OldRefrigerator

IMPORTANT: Child entrapment and suffocation are not problems
of the past. Junked or abandoned refrigerators are still dangerous

- even if they will sit for "just a few days." Ifyou are getting rid of
your old refrigerator, please follow these instructions to help
prevent accidents.

INSTALLATIONINSTRUCTIONS

Before You Throw Away Your Old Refrigerator or Freezer:

• Take off the doors.

• Leave the shelves in place so that children may not easily
climb inside.

When Moving Your Refrigerator:
Your refrigerator is heaW. When moving the refrigerator

for cleaning or service, be sure to protect the floor.
Always pull the refrigerator straight out when moving it.
Do not wiggle or "walk" the refrigerator when trying to move

it, as floor damage could occur.

Remove packaging materials. Do not use sharp instruments,
rubbing alcohol, flammable fluids, or abrasive cleaners to remove

tape or glue. These products can damage the surface of your
refrigerator. For more information, see "Refrigerator Safety."

2

Important information to know about glass shelves

and covers:

Do not clean glass shelves or covers with warm water when
they are cold. Shelves and covers may break if exposed to
sudden temperature changes or impact, such as bumping.
For your protection, tempered glass is designed to shatter
into many small, pebble-size pieces. This is normal. Glass
shelves and covers are heavy. Use special care when
removing them to avoid impact from dropping.

Explosion Hazard

Keep flammable materials and vapors, such as
gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

Toensure proper ventilation for your refrigerator, allow for V2"
(1.25 cm) space on each side and at the top. When installing your

refrigerator next to a fixed wall, leave 2" (5.08 cm) minimum on
each side (depending on your model) to allow for the door to
swing open. If your refrigerator has an ice maker, allow extra
space at the back for the water line connections.

__JL__

V2" (1.25 cm)

NOTES:

It is recommended that you do not install the refrigerator near
an oven, radiator, or other heat source. Do not install in a

location where the temperature will fall below 55°F (13°C).
Normal minimum cabinet cut-out width required for product

installation is 36" (91.44 cm). However, if the product is placed
against an extended wall and the ability to remove the crisper

pans is desired, an additional 18" (45.72 cm) of cabinet width
is required, so a total cabinet opening width of 54"
(137.16 cm)is recommended.

Z

/

2" (5.08 crnl /

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.

Do not use an extension cord.
Failure to follow these instructions can result in death,

fire, or electrical shock.

Before you move your refrigerator into its final location, it is
important to make sure you have the proper electrical connection.

Recommended Grounding Method

A 115 Volt, 60 Hz., AC only, 15- or 20-amp fused, grounded
electrical supply is required. It is recommended that a separate

circuit serving only your refrigerator be provided. Use an outlet
that cannot be turned off by a switch. Do not use an

extension cord.
NOTE: Before performing any type of installation, cleaning, or

removing a light bulb, turn the control (Thermostat, Refrigerator or
Freezer Control depending on the model) to OFF and then
disconnect the refrigerator from the electrical source. When you

are finished, reconnect the refrigerator to the electrical source and
reset the control (Thermostat, Refrigerator or Freezer Control
depending on the model) to the desired setting. See "Using the

Controls."

Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed

here.

TOOLS NEEDED:

• Flat-blade screwdriver • W' Nut driver

• z/_6"and W' Open-end or two • W' Drill bit
adjustable wrenches • Cordless drill

NOTE: Your refrigerator dealer has a kit available with a W'
(6.35 mm) saddle-type shutoff valve, a union, and copper tubing.
Before purchasing, make sure a saddle-type valve complies with

your local plumbing codes. Do not use a piercing-type or s_6"
(4.76 mm) saddle valve which reduces water flow and clogs more
easily.

IMPORTANT:

• All installations must meet local plumbing code requirements.

• Use copper tubing and check for leaks. Install copper tubing
only in areas where the household temperatures will remain

above freezing.

Water Pressure

A cold water supply with water pressure of between 30 and
120 psi (207 and 827 kPa) is required to operate the water
dispenser and ice maker. If you have questions about your water
pressure, call a licensed, qualified plumber.

Reverse Osmosis Water Supply
IMPORTANT: The pressure of the water supply coming out of a

reverse osmosis system going to the water inlet valve of the
refrigerator needs to be between 30 and 120 psi (207 and
827 kPa).

If a reverse osmosis water filtration system is connected to your
cold water supply, the water pressure to the reverse osmosis

system needs to be a minimum of 40 to 60 psi (276 to 414 kPa).
If the water pressure to the reverse osmosis system is less than

40 to 60 psi (276 to 414 kPa):

• Check to see whether the sediment filter in the reverse
osmosis system is blocked. Replace the filter if necessary.

• Allow the storage tank on the reverse osmosis system to refill
after heavy usage.

If your refrigerator has awater filter, it may further reduce the
water pressure when used in conjunction with a reverse
osmosis system. Remove the water filter. See "Water Filtration

System ."

If you have questions about your water pressure, call a licensed,
qualified plumbe_

5. Using a cordless drill, drill a W' (6.35 mm) hole in the cold
water pipe you have selected.

A. Cold waterpipe E.Compression sleeve
B,Pipe c/amp F.Shutoff valve
C. Copper tubing G.Packing nut
D. Compression nut

6. Fasten the shutoff valve to the cold water pipe with the pipe
clamp. Be sure the outlet end is solidly in the W' (6.35 mm)

drilled hole in the water pipe and that the washer is under the
pipe clamp. Tighten the packing nut. Tighten the pipe clamp
screws slowly and evenly so the washer makes a watertight

seal. Do not overtighten or you may crush the copper tubing.

7. Slip the compression sleeve and compression nut on the
copper tubing as shown. Insert the end of the tubing into the
outlet end squarely as far as it will go. Screw the compression
nut onto outlet end with adjustable wrench. Do not

overtighten.

8. Place the free end of the tubing in a container or sink, and turn
ON the main water supply. Flush thetubing until water is clear.
Turn OFF the shutoff valve on the water pipe. Coil the copper

tubing.

Read all directions before you begin.
IMPORTANT: Ifyou turn the refrigerator on before the water line is

connected, turn the ice maker OFE

Connect to Water Line

1. Unplug refrigerator or disconnect power.

2. Turn OFF main water supply. Turn ON nearest faucet long
enough to clear line of water.

3. Locate a V#"(12.70 mm) to 1V4"(3.18 cm) vertical cold water
pipe near the refrigerator.

IMPORTANT:

• Make sure it is a cold water pipe.

• Horizontal pipe will work, but drill on the top side of the

pipe, not the bottom. This will help keep water away from
the drill and normal sediment from collecting in the valve.

4.

Determine the length of copper tubing you need. Measure
from the connection on the lower rear corner of refrigerator to

the water pipe. Add 7 ft (2.1 m) to allow for cleaning. Use 1/_,,
(6.35 mm) O.D. (outside diameter) copper tubing. Be sure both
ends of copper tubing are cut square.

Connect to Refrigerator

Style 1

1. Unplug refrigerator or disconnect power.

2. Attach the copper tube to the valve inlet using a compression
nut and sleeve as shown. Tighten the compression nut. Do not

overtighten.

3. Use the tube clamp on the back of the refrigerator to secure
the tubing to the refrigerator as shown. This will help avoid

damage to the tubing when the refrigerator is pushed back
against the wall.

4. Turn shutoff valve ON.

5. Check for leaks. Tighten any connections (including
connections at the valve) or nuts that leak.

B

C
D

A. Tube clamp

B. Copper tubing

C. Compression nut
D. Valve inlet

6. The ice maker is equipped with a built-in water strainer. If your
water conditions require a second water strainer, install it in
the W' (6.35 mm) water line at either tube connection. Obtain
a water strainer from your nearest appliance dealer.

4

Style 2

1. Unplug refrigerator or disconnect power.

2. Remove and discard the black nylon plug from the gray water
tube on the rear of the refrigerator.

3. If the gray water tube supplied with the refrigerator is not long
enough, a 1/4"x W' (6.35 mm x 6.35 mm) coupling is needed in

order to connect the water tubing to an existing household
water line. Thread the provided nut onto the coupling on the
end of the copper tubing.

NOTE: Tighten the nut by hand. Then tighten it with a wrench
two more turns. Do not overtighten.

A B C D E F G

A. Refrigerator water tubing

B. Nut (provided)
C. Bulb

D. Coupling (purchased)

4. Turn shutoff valve ON.

5. Check for leaks. Tighten any nuts or connections (including
connections at the valve) that leak.

Style 3

1. Unplug refrigerator or disconnect power.

2. Remove and discard the black nylon plug from the gray water
tube on the rear of the refrigerator.

3. Thread the provided nut onto the water valve as shown.
NOTE: Tighten the nut by hand. Then tighten it with a wrench

two more turns. Do not overtighten.

E. Ferrule (purchased)

F Nut (purchased)

G. Household water line

Complete the Installation

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.
Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord,
Failure to follow these instructions can result in death,

fire, or electrical shock,

1. Plug into a grounded 3 prong outlet.

2. Flush the water system. See "Prepare the Water System" or
"Water and Ice Dispensers."

NOTE: Allow 24 hours to produce the first batch of ice. Allow
3 days to completely fill ice container.

REFRIGERATORUSE

Temperature Control Adjustment and Cooling On/Off
The refrigerator and freezer control buttons are located on the

dispenser panel.

A

B

A. Bulb

B. Nut (provided)

4. Turn shutoff valve ON.

5. Check for leaks. Tighten any nuts or connections (including
connections at the valve) that leak.

Toturn cooling off, press and hold the LOCK and FAST ICE/COOL
buttons at the same time for 3 seconds. Press and hold LOCK

and FAST ICE/COOL again to turn cooling on. Your refrigerator
and freezer will not cool when cooling is off.

IMPORTANT: Toavoid unintentionally locking the dispenser
or changing other settings, be sure to press both buttons at

exactly the same time.

For your convenience, your refrigerator and freezer controls are
preset at the factory. When you first install your refrigerator, make

sure that the controls are still set to the "mid-settings."
Toview set points, press the TEMPERATURE button on your

dispenser panel. The factory recommended set points are
O°F(-18°C) for the freezer and 3T'F (3°C) for the refrigerator.

IMPORTANT:

• Wait 24 hours before you put food into the refrigeraton If you
add food before the refrigerator has cooled completely, your
food may spoil.

NOTE: Adjusting the set points to a higher (colder) than
recommended setting will not cool the compartments any

fasteE

• Ifthe temperature is too warm or too cold in the refrigerator or
freezer, first check the air vents to be sure they are not

blocked before adjusting the controls.

• The preset settings should be correct for normal household
usage. The controls are set correctly when milk or juice is as
cold as you like and when ice cream is firm.

• Wait at least 24 hours between adjustments. Recheck the
temperatures before other adjustments are made.

• The display screen on the dispenser control panel has a
backlight, which will turn off automatically when the control

buttons have not been used for 30 seconds or more. When
the backlight is off, the first press of a control button will only

reactivate the backlight, without changing any settings. Within
30 seconds after the backlight has been reactivated,

additional presses of control buttons will change the
applicable settings.

Adjusting the Controls

To adjust the set points, press and hold the TEMPERATURE
button for 3 seconds. When adjust mode is activated, set points

and adjusting information will appear on the display screen.

o 13,o

_i__ SUggeted O

SET/EXIT_" oF /°C LREFRGE_ATOI_|_'}_J

CONDITION: TEMPERATURE

ADJUSTMENT:

REFRIGERATOR too cold REFRIGERATOR Setting

1° higher

REFRIGERATOR too warm REFRIGERATOR Setting

1° lower

FREEZER too cold FREEZER Setting

1° higher

FREEZER too warm/too little ice FREEZER Setting

1° lower

Press TEMPERATURE to exit adjust mode, or allow about
15 seconds of inactivity and adjust mode will turn off
automatically.

Additional Features

NOTE: The display screen on the dispenser control panel has a
backlight, which will turn off automatically when the control

buttons have not been used for 30 seconds or more. When the
backlight is off, the first press of a control button will only
reactivate the backlight, without changing any settings. Within

30 seconds after the backlight has been reactivated, additional
presses of control buttons will change the applicable settings.

Fast Cool & Fast Ice
The Fast Cool feature assists with periods of heavy ice usage, full

grocery loads, or temporarily warm room temperatures.
The Fast Ice feature assists with temporary periods of heavy ice

use by increasing ice production over a 24-hour period.

• Press the FAST ICE/COOL button to turn on the Fast Cool
feature. When the feature turns on, the "Fast Cool" animation
will appear on the dispenser display.

NOTE: To view Celsius temperatures, press the FILTER button
when adjust mode is activated. To return the display setting to
Fahrenheit, press FILTER again.

Refrigerator Controls
When adjust mode is activated, the LOCK and FAST ICE/COOL

buttons adjust the refrigerator compartment temperature. The set
point range for the refrigerator is 33°F to 45°F (0°C to 7°C).

• Press LOCK to lower the set point.

• Press FAST ICE/COOL to raise the set point.
Freezer Controls

When adjust mode is activated, the ICE and LIGHT buttons adjust
the freezer compartment temperature. The set point range for the
freezer is -5°F to 5°F (-21 °C to -15°C).

• Press ICE to lower the set point.

• Press LIGHTto raisethe set point.

The Fast Cool setting will remain on for 24 hours unless
manually turned off.

Press FAST ICE/COOL again to turn off Fast Cool and turn on
the Fast Ice feature. When the feature turns on, the "Fast Ice"

animation will appear on the dispenser display.

dd

The Fast Ice setting will remain on for 24 hours unless
manually turned off.

Press FAST ICE/COOL a third time to activate Fast Cool and
Fast Ice at the same time. When the features are activated,

both the "Fast Cool" and "Fast Ice" animations will appear on
the dispenser display.

• Press FAST ICE/COOL a fourth time to turn both Fast Cool
and Fast Ice off.

When Fast Cool and/or Fast Ice are active, the temperature
display will not change. After 24 hours, the refrigerator returns to

the previous temperature set points.
NOTE: If increased ice production is desired at all times, change

the freezer control to a lower setting. Setting the freezer to a
colder temperature may make some foods, such as ice cream,

harder.

6

6th Sense TM Temperature Management

The 6th Sense TM feature assists with regulating the temperature
inside the refrigerator. If a large quantity of warm food is placed in
the refrigerator or warm air enters the refrigerator while the door is

held open, the 6th Sense TM system activates to quickly restore the
temperature to the set point.

Cool air from the freezer is directed to the refrigerator door bin
directly beneath the vents.

NOTE: The dairy compartment and can rack are not associated
with the Chilled Door Bin feature.

NOTE: The 6th Sense TM system is always on when your
refrigerator is operating. You do not need to press any buttons to

activate it. The 6th Sense TM icon on the dispenser display screen
indicates that the feature has automatically activated.

Temperature Display Always On
This feature keeps the temperature display on at all times.

• Press and hold TEMPERATURE and LOCK at the same time
for 3 seconds to turn the feature on.

IMPORTANT: To avoid unintentionally locking the dispenser
or changing other settings, be sure to press both buttons at

exactly the same time.

• Press and hold TEMPERATURE and LOCK at the same time
for 3 seconds again to turn the feature oft.

Door Ajar Alarm
The Door Ajar Alarm feature sounds an alarm when the refrigerator

or freezer door is open for 5 minutes and the product cooling is
turned on. The alarm will repeat every 2 minutes. Close both

doors to turn it off. The feature then resets and will reactivate
when either door is left open again for 5 minutes.

Disabling Sounds

• Toturn off all dispenser and control sounds, including the
Door Ajar Alarm, press and hold ICE and FAST ICE/COOL at

the same time for 3 seconds.

• Toturn all sounds back on, press and hold ICE and FAST ICE/
COOL at the same time for 3 seconds again.

The control can be adjusted to properly chill meats or vegetables.
The air inside the pan is cooled to avoid "spot" freezing and can

be set to keep meats at the National Livestock and Meat Board
recommended storage temperatures of 28°to 32°F (-2 ° to O°C).
The convertible vegetable/meat drawer control comes preset at
the lowest meat setting.

To store meat:
Set the control to one of the three MEAT settings to store meat at

its optimal storage temperature.
To store vegetables:

Set the control to VEG to store vegetables at their optimal storage
temperatures.

NOTE: If food starts to freeze, move the control to the left (less
cold). Remember to wait 24 hours between adjustments.

You can control the amount of humidity in the moisture-sealed
crisper. Adjust the control to any setting between LOW and HIGH.

LOW (open) for best storage of fruits and vegetables with skins.

HIGH (closed) for best storage of fresh, leafy vegetables.

Chilled Door Bin Control

The chilled door bin control is located on the left-hand side of the
refrigerator compartment.

• Slide the door chill control to the left to reduce the flow of cold
air to the bin and make it less cold.

• Slide the door chill control to the right to increase the flow of
cold air to the bin and make it colder.

Depending on your model, you may have one or more of the
following options: the ability to select either crushed or cubed ice,

a rotating water dispenser faucet and pull-out tray, a special light
that turns on when you use the dispenser, or a lock option to
avoid unintentional dispensing.

NOTES:

• The dispensing system will not operate when the freezer door
is open.

After connecting the refrigerator to a water source, flush the
water system. Use a sturdy container to depress and hold the

water dispenser pad for 5 seconds, then release it for
5 seconds. Repeat until water begins to flow. Once water
begins to flow, continue depressing and releasing the

dispenser pad (5 seconds on, 5 seconds off) for an additional
2 minutes. This will flush air from the filter and water

dispensing system. Additional flushing may be required in
some households. As air is cleared from the system, water

may spurt out of the dispenser.

• Allow 24 hours for the refrigerator to cool down and chill
water.

• Allow 24 hours to produce the first batch of ice. Discard the
first three batches of ice produced.

The display screen on the dispenser control panel has a
backlight, which will turn off automatically when the control

buttons have not been used for 30 seconds or more. When
the backlight is off, the first press of a control button will only

reactivate the backlight, without changing any settings. Within
30 seconds after the backlight has been reactivated,
additional presses of control buttons will change the

applicable settings.

The Water Dispenser

IMPORTANT: Dispense enough water every week to maintain a
fresh supply.

To Dispense Water (Standard):

1. Press a sturdy glass against the water dispenser pad OR
place the glass below the water dispenser and press the

WATER button.

5,

To stop dispensing before the selected volume has been
dispensed, remove the glass from the dispenser pad OR press

the WATER button a second time.
NOTE: If you stop dispensing before the desired volume has

been dispensed, the digital display will continue to show how
much water remains to be dispensed. The display will turn off
after 15 seconds of inactivity.

To select a new volume or select the same volume again, you
must first finish dispensing the selected volume, or turn the

Measured Fill feature off and then turn it back on.

©

NOTE: While dispensing water and for 5 seconds after
dispensing has stopped, the digital display will show how

much water has been dispensed.

2. Remove the glass OR release the button to stop dispensing.

To Dispense Water (Measured Fill}:
Measured Fill allows you to dispense a specified amount of water

with the touch of a few buttons.
NOTE: The amount of water you select will be dispensed. Be sure

that the container is empty and can hold the entire volume. If ice is
in the container, you may need to adjust your selection.

1. Press MEASURED FILL to turn the feature on.

@

Press MEASURED FILL again or press TEMPERATURE to turn
the feature off.

NOTE: The dispenser will automatically turn off Measured Fill
after 15 seconds of inactivity.

2. You can dispense water by the ounce, cup, or liter. Press iCE
and LIGHT to select your desired setting. Default, minimum,

and maximum volumes are listed below.

Units Default Minimum Maximum

Ounces 8 1 128

Cups 1 1/4 16
Liters 0.25 0.05 4

3. Press the LOCK and FAST ICE/COOL buttons to adjust the
volume as desired.

NOTE: Most coffee cups (commonly 4 to 6 oz [118 to 177 mL]
per cup) are not the same size as a measuring cup (8 ez

[237 mL]). You may need to adjust the volume to avoid
unintentionally overfilling coffee cups.

4. To dispense water, press a sturdy glass against the water
dispenser pad OR place the glass below the water dispenser
and press the WATER button.

Rotating Faucet and Pull-out Tray (onsome models)

Your dispenser ='nayinclude a rotating water faucet and a small
pull-out tray at the bottom of the dispenser.

....... B

A. Faucet rotated

B. Puff-out tray

• The faucet rotates to the center to allow for easy dispensing
into large containers. To rotate it, push in and release the left-

hand side of the faucet as shown.

The faucet rotates to the center automatically. However. you
must rotate it back into place manually. When in place, it will

click.
NOTE: When using the dispenser with the faucet rotated, do

not use the water dispenser pad. Only use the WATER button
to dispense. Dispensing by pressing the container against the

water dispenser pad may result in unintentional spilling.

• The tray can be pulled out approximately 2" (5.08 cm) to
better support large containers, it is designed to catch small
spills and allow for easy cleaning. There is no drain in the tray.

NOTE: The tray can be removed from the dispenser and
carried to the sink to be emptied or cleaned. Pull the tray out
until it hits the stop, then gently lift up on the back of the tray
and slide it out the rest of the way.

©

NOTE: While dispensing water, the digital display will count
down how much water remains to be dispensed, according to
the volume you selected. The flow of water will automatically

stop once the desired volume has been dispensed.

8

The Ice Dispenser

Ice dispenses from the ice maker storage bin in the freezer when
the dispenser pad is pressed. The dispensing system will not
operate when the freezer door is open. To turn off the ice maker,
see "Ice Maker and Storage Bin."

Your ice maker can produce both crushed and cubed ice. Before
dispensing ice, select which type of ice you prefer by pressing the

ICE button.
The display screen indicates which type of ice is selected.

J..o'.,.

' m=¶

CRUSHED CUBED

For crushed ice, cubes are crushed before being dispensed. This
may cause a slight delay when dispensing crushed ice. Noise
from the ice crusher is normal, and pieces of ice may vary in size.
When changing from crushed to cubed, a few ounces of crushed
ice will be dispensed along with the first cubes.

To Dispense lee:

1. Press the button to select the desired type of ice.

The Dispenser Lock (on some models)

The dispenser can be turned off for easy cleaning or to avoid
unintentional dispensing by small children and pets.

NOTE: The lock feature does not shut off power to the refrigerator,
to the ice maker, or to the dispenser light. It simply deactivates the

dispenser controls and levers. To turn off the ice maker, see "Ice
Maker and Storage Bin."

• Press and hold LOCK for 3 seconds to lock the dispenser.

• Press and hold LOCK a second time to unlock the dispenser.

The display screen indicates when the dispenser is locked.

Cut Hazard

Use a sturdy glass when dispensing ice.
Failure to do so can result in cuts.

2. Press a sturdy glass against the ice dispenser pad OR place
the glass below the ice dispenser and press the ice dispenser

button.

@

Hold the glass close to the dispenser opening so ice does not
fall outside of the glass.

IMPORTANT: Youdo not need to apply alot of pressure to the
pad or button in order to activate the ice dispenser. Pressing

hard will not make the ice dispense faster or in greater
quantities.

3=

Remove the glass OR release the button to stop dispensing.
NOTE: Ice may continue to dispense for up to 10 seconds

after removing the glass from the pad or releasing the button.
The dispenser may continue to make noise for a few seconds
after dispensing.

The Dispenser Ught (on some models)

When you use the dispenser, the light will automatically turn on.
If you want the light to be on continuously, you may choose either
ON or DIM or AUTO. The display screen indicates which mode is

selected.

LOCKED UNLOCKED

Turning the Ice Maker On/Off

The On/Oft switch is located on the top right-hand side of the
freezer compartment.

Toturn on the ice maker, slide the control to the ON (left) position.
To manually turn off the ice maker, slide the control to the OFF

(right) position.
NOTE: Your ice maker has an automatic shutoff. The ice maker

sensors will automatically stop ice production, but the control will
remain in the ON (left) position.

REMEMBER:

• Allow 24 hours to produce the first batch of ice. Discard the
first three batches of ice produced.

The quality of your ice will be only as good as the quality of the
water supplied to your ice maker. Avoid connecting the ice

maker to a softened water supply. Water softener chemicals
(such as salt) can damage parts of the ice maker and lead to
poor quality ice. If asoftened water supply cannot be avoided,

make sure the water softener is operating properly and is well
maintained.

Do not use anything sharp to break up the ice in the storage
bin. This can cause damage to the ice container and the

dispenser mechanism.
Do not store anything on top of or in the ice maker or storage

bin.

ON DIM AUTO OFF

ON: Press LIGHT to turn the dispenser light on.
DIM: Press LIGHT a second time to select DIM mode. The
dispenser light will remain on, but at a lower intensity.
AUTO: Press LIGHT a third time to select AUTO mode. The

dispenser light will automatically adjust to become dimmer as the
room brightens, and brighter as the room darkens.

OFF: Press LIGHT a fourth time to turn the dispenser light off.
The dispenser lights are LEDs that can not be changed. If it

appears that your dispenser lights are not working, see
"Troubleshooting" for more information.

Removing and Replacing Ice Storage Bin

1. Hold the base of the storage bin with both hands and press
the release button to lift the storage bin up and out.

NOTE: It is not necessary to turn the ice maker control to the
OFF (right) position when removing the storage bin. The
sensor cover ("flipper door") on the left wall of the freezer

stops the ice maker from producing ice if the door is open or
the storage bin is removed.

2. Replace the storage bin on the door and push down to make
sure it is securely in place.

Do not use with water that is microbiologically unsafe or of I
unknown quality without adequate disinfection before or

I

after the system.

Water Filter Status Light (on some models)

The water filter status light will help you know when to change
your water filter. When the water filter status display changes from

"GOOD" to "ORDER," this tells you that it is almost time to
change the water filter cartridge. Replace the water filter cartridge
when the water filter status display changes to "REPLACE." If
water flow to your water dispenser or ice maker decreases

noticeably, change the filter sooner. The filter should be replaced
at least every 6 months depending on your water quality and

usage.
After changing the water filter, reset the status light by pressing

and holding the FILTER button for 3 seconds. The status light will
change from "REPLACE" to "GOOD" when the system is reset.

Changing the Water Filter

1. Press the eject button to release the filter from the base grille.

2. Pull the filter straight out.

3. Turn the cap counterclockwise to remove it from the filter.
IMPORTANT: Do not discard the cap. It is part of your

refrigerator. Keep the cap to use with the replacement filter.

4. Align the ridge on the cap with the arrow on the new filter and
turn the cap until it snaps into place.

NOTE: You can run the dispenser without a filter. Your water
will not be filtered. Simply insert the cap all of the way into the

base grille and rotate the cap until it is firmly in place.

5. Remove the covers from the O-rings. Be sure the O-rings are
still in place after the covers are removed.

6. Push the filter into the base grille. The eject button will pop
back out when the filter is fully engaged.

7. Flush the water system. See "Water and Ice Dispensers."

REFRIGERATOR CARE

IMPORTANT: Because air circulates between both sections, any
odors formed in one section will transfer to the other. You must

thoroughly clean both sections to eliminate odors. To avoid odor
transfer and drying out of food, wrap or cover foods tightly.

!

To Clean Your Refrigerator:
NOTE: Do not use abrasive or harsh cleaners such as window

sprays, scouring cleansers, flammable fluids, cleaning waxes,

I

concentrated detergents, bleaches or cleansers containing
petroleum products on plastic parts, interior and door liners or

gaskets. Do not use paper towels, scouring pads, or other harsh
cleaning tools.

1. Unplug refrigerator or disconnect power.

2. Hand wash, rinse, and dry removable parts and interior
surfaces thoroughly. Use a clean sponge or soft cloth and a

mild detergent in warm water.

3. Wash stainless steel and painted metal exteriors with a clean
sponge or soft cloth and a mild detergent in warm water.

4. There is no need for routine condenser cleaning in normal
home operating environments. Ifthe environment is
particularly greasy or dusty, or there is significant pet traffic in
the home, the condenser should be cleaned every 2 to

3 months to ensure maximum efficiency.
If you need to clean the condenser:

• Removethe base grille.

• Use a vacuum cleaner with a soft brush to clean the gdlle,

the open areas behind the grille and the front surface area
of the condenser.

• Replace the base grille when finished.

5. Plug in refrigerator or reconnect power.

NOTE: Not all bulbs will fit your refrigerator. Be sure to replace the
bulb with one of the same size, shape and wattage. Replacement
bulbs are available from your dealer.

• The dispenser lights are LEDs that can not be changed.

• All other lights require a 40-watt bulb.

1. Unplug refrigerator or disconnect power.

2. Remove light shield when applicable.
NOTE: To clean the light shield, wash it with warm water and

liquid detergent. Rinse and dry the shield well.

3. Remove light bulb and replace with one of the same size,
shape and wattage.

4. Replace light shield when applicable.

5. Plug in refrigerator or reconnect power.

Explosion Hazard

Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.

Both the refrigerator and freezer sections defrost automatically.
However, clean both sections about once a month to avoid

buildup of odors. Wipe up spills immediately.

10