Whirlpool GS5SVAXVB00, GS5DHAXVB00, GD5RVAXVB00, GD5DHAXVY02, GD5DHAXVQ02 Owner’s Manual

...
THANK YOU for purchasing this high-quality product. If you should experience a problem not covered in TROUBLESHOOTING, please visit our website at www.whirlpool.com for additional information. If you still need assistance, call us at 1-800-253-1301.
In Canada, visit our website at www.whirlpool.ca or call us at 1-800-807-6777. You will need your model and serial number located on the inside wall of the refrigerator compartment.
Para obtener acceso a "lnstrucciones parael usuario del refrigerador" en espaSol, o paraobtener informaci6n adicional acerca de su producto, visite: www.whirlpool.com.
Tenga listo su nQmero de modelo completo. Puede encontrar su nQmerode modelo y de serie ubicados en la pared interior del compartimiento del refrigerador.
REFRIGERATOR SAFETY ..................................................................... 1
INSTALLATION INSTRUCTIONS ......................................................... 2
REFRIGERATOR USE ........................................................................... 5
REFRIGERATOR CARE ......................................................................... 9
TROUBLESHOOTING .......................................................................... 10
ACCESSORIES .................................................................................... 12
WATER FILTER CERTIFICATIONS .................................................... 12
PERFORMANCE DATA SHEETS ........................................................ 13
WARRANTY .......................................................................................... 15
SECURITF: DU REFRIGF:RATEUR ..................................................... 17
INSTRUCTIONS D'INSTALLATION ................................................... 18
UTILISATION DU RF:FRIGF:RATEUR ................................................. 21
ENTRETIEN DU RF:FRIGF:RATEUR ................................................... 25
DF:PANNAGE ........................................................................................ 26
ACCESSOIRES .................................................................................... 28
FEUILLES DE DONNF:ES SUR LA PERFORMANCE ........................ 29
GARANTIE ............................................................................................ 31
REFRIGERATORSAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
W10162450A
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electric shock, or injury when using your refrigerator, follow these basic precautions:
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Disconnect power before servicing.
Replace all parts and panels before operating.
Remove doors from your old refrigerator.
Use nonflammable cleaner.
Keep flammable materials and vapors, such as gasoline, away from refrigerator.
Use two or more people to move and install refrigerator.
Disconnect power before installing ice maker (on ice maker
kit ready models only).
Use a sturdy glass when dispensing ice (on some models).
SAVE THESE INSTRUCTIONS
ProperDisposal ofYour Old Refrigerator
Suffocation Hazard Remove doors from your old refrigerator. Failure to do so can result in death or brain damage.
IMPORTANT: Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigerators are still dangerous
- even if they will sit for "just a few days." Ifyou are getting rid of your old refrigerator, please follow these instructions to help prevent accidents.
INSTALLATIONINSTRUCTIONS
Before You Throw Away Your Old Refrigerator or Freezer:
Take off the doors.
Leave the shelves in place so that children may not easily climb inside.
Excessive Weight Hazard
Use two or more people to move and install refrigerator.
Failure to do so can result in back or other injury.
Remove packaging materials. Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove
tape or glue. These products can damage the surface of your refrigerator. For more information, see "Refrigerator Safety."
When Moving Your Refrigerator: Your refrigerator is heavy. When moving the refrigerator
for cleaning or service, be sure to protect the floor. Always pull the refrigerator straight out when moving it.
Do not wiggle or "walk" the refrigerator when trying to move it, as floor damage could occur.
important information to know about glass shelves
and covers:
Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. For your protection, tempered glass is designed to shatter into many small, pebble-size pieces. This is normal. Glass shelves and covers are heavy. Use special care when removing them to avoid impact from dropping.
ExplosionHazard
Keepflammablematerialsandvapors,such as
gasoline, away from refrigerator. Failure to do so can result in death, explosion, or fire.
To ensure proper ventilation for your refrigerator, allow for 1/211 (1.25 cm) space on each side and at the top. When installing your refrigerator next to a fixed wall, leave 2" (5.08 cm) minimum on
each side (depending on your model) to allow for the door to swing open. If your refrigerator has an ice maker, allow extra space at the back for the water line connections.
JL
/
/
112"(1.25 cm) _
II -- I_I
NOTES:
It is recommended that you do not install the refrigerator near an oven, radiator, or other heat source. Do not install in a location where the temperature will fall below 55°F (13°C).
Normal minimum cabinet cut-out width required for product installation is 36" (91.44 cm). However, if the product is placed
against an extended wall and the ability to remove the crisper pans is desired, an additional 18" (45.72 cm) of cabinet width is required, so a total cabinet opening width of 54"
(137.16 cm) is recommended.
/
}
, /m
2" 15.08ore)/
/
/
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong. Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical connection.
Recommended Grounding Method
A 115 Volt, 60 Hz., AC only, 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate
circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an
extension cord. NOTE: Before performing any type of installation, cleaning, or
removing a light bulb, turn the control (Thermostat, Refrigerator or Freezer Control depending on the model) to OFF and then disconnect the refrigerator from the electrical source. When you
are finished, reconnect the refrigerator to the electrical source and reset the control (Thermostat, Refrigerator or Freezer Control depending on the model) to the desired setting. See "Using the
Controls."
Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed
here.
TOOLS NEEDED:
Flat-blade screwdriver 1/411Nut driver
%611and 1/211Open-end or two 1/411Drill bit adjustable wrenches
NOTE: Your refrigerator dealer has a kit available with a 1/4" (6.35 mm) saddle-type shutoff valve, a union, and copper tubing. Before purchasing, make sure a saddle-type valve complies with your local plumbing codes. Do not use a piercing-type or %6"
(4.76 mm) saddle valve which reduces water flow and clogs more easily.
IMPORTANT:
All installations must meet local plumbing code requirements.
Use copper tubing and check for leaks, Install copper tubing only in areas where the household temperatures will remain above freezing.
Cordless drill
Water Pressure
A cold water supply with water pressure of between 30 and 120 psi (207 and 827 kPa) is required to operate the water
dispenser and ice maker. Ifyou have questions about your water pressure, call a licensed, qualified plumber.
Reverse Osmosis Water Supply IMPORTANT: The pressure of the water supply coming out of a
reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 30 and 120 psi (207 and 827 kPa).
If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the reverse osmosis
system needs to be a minimum of 40 to 60 psi (276 to 414 kPa). If the water pressure to the reverse osmosis system is less than
40 to 60 psi (276 to 414 kPa):
Check to see whether the sediment filter in the reverse osmosis system is blocked. Replace the filter if necessary.
Allow the storage tank on the reverse osmosis system to refill after heavy usage.
If your refrigerator has a water filter, it may further reduce the water pressure when used in conjunction with a reverse
osmosis system. Remove the water filter. See "Water Filtration System."
If you have questions about your water pressure, call a licensed, qualified plumber.
Read all directions before you begin. IMPORTANT: Ifyou turn the refrigerator on before the water line is
connected, turn the ice maker OFR
6. Fasten the shutoff valve to the cold water pipe with the pipe clamp. Be sure the outlet end is solidly in the 1/4"(6.35 mm)
drilled hole in the water pipe and that the washer is under the pipe clamp. Tighten the packing nut. Tighten the pipe clamp screws slowly and evenly so the washer makes a watertight seal. Do not overtighten or you may crush the copper tubing.
7. Slip the compression sleeve and compression nut on the copper tubing as shown. Insert the end of the tubing into the outlet end squarely as far as it will go. Screw the compression nut onto outlet end with adjustable wrench. Do not
overtighten.
8. Place the free end of the tubing in a container or sink, and turn ON the main water supply. Flush the tubing until water is clear. Turn OFF the shutoff valve on the water pipe. Coil the copper
tubing.
Connect to Refrigerator
Style 1
1. Unplug refrigerator or disconnect power.
2. Attach the copper tube to the valve inlet using a compression nut and sleeve as shown. Tighten the compression nut. Do not
overtighten.
3. Use the tube clamp on the back of the refrigerator to secure the tubing to the refrigerator as shown. This will help avoid
damage to the tubing when the refrigerator is pushed back against the wall.
4. Turn shutoff valve ON.
5. Check for leaks. Tighten any connections (including connections at the valve) or nuts that leak.
A
Connect to Water Line
1. Unplug refrigerator or disconnect power.
2. Turn OFF main water supply. Turn ON nearest faucet long enough to clear line of water.
3. Locate a 1_,,(12.70 mm) to 11/4'' (3.18 cm) vertical cold water pipe near the refrigerator.
IMPORTANT:
Make sure it is a cold water pipe.
Horizontal pipe will work, but drill on the top side of the
pipe, not the bottom. This will help keep water away from the drill and normal sediment from collecting in the valve.
4.
Determine the length of copper tubing you need. Measure from the connection on the lower rear corner of refrigerator to
the water pipe. Add 7 ft (2.1 m) to allow for cleaning. Use 1/4" (6.35 mm) O.D. (outside diameter) copper tubing. Be sure both ends of copper tubing are cut square.
5=
Using a cordless drill, drill a 1/4"(6.35 mm) hole in the cold water pipe you have selected.
A. Cold water pipe B. Pipe clamp C. Copper tubing D. Compression nut
E. Compression sleeve F. Shutoff valve
G. Packing nut
C D
A. Tube clamp B. Copper tubing
6=
The ice maker is equipped with a built-in water strainer. Ifyour
C. Compression nut D. Valve inlet
water conditions require a second water strainer, install it in the 1/4"(6.35 mm) water line at either tube connection. Obtain
a water strainer from your nearest appliance dealer.
Style 2
1. Unplug refrigerator or disconnect power.
2. Remove and discard the black nylon plug from the gray water tube on the rear of the refrigerator.
3. If the gray water tube supplied with the refrigerator is not long enough, a 1/4"x 1/4"(6.35 mm x 6.35 mm) coupling is needed in order to connect the water tubing to an existing household water line. Thread the provided nut onto the coupling on the
end of the copper tubing. NOTE: Tighten the nut by hand. Then tighten it with a wrench
two more turns. Do not overtighten.
A B C D E F G
A. Refrigerator water tubing E.Ferrule (purchased)
B. Nut (provided) F Nut (purchased) C. Bulb G. Household water line
D. Coupling (purchased)
4. Turn shutoff valve ON.
5. Check for leaks. Tighten any nuts or connections (including connections at the valve) that leak.
REFRIGERATORUSE
Style 3
1. Unplug refrigerator or disconnect power.
2. Remove and discard the black nylon plug from the gray water tube on the rear of the refrigerator.
3. Thread the provided nut onto the water valve as shown. NOTE: Tighten the nut by hand. Then tighten it with a wrench
two more turns. Do not overtighten.
A.Bulb B.Nut (provided)
4. Turn shutoff valve ON.
5. Check for leaks. Tighten any nuts or connections (including connections at the valve) that leak.
Complete the Installation
Electrical Shock Hazard
Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.
Do not use an extension cord, Failure to follow these instructions can result in death,
fire, or electrical shock.
f. Plug into a grounded 3 prong outlet.
2. Flush the water system. See "Prepare the Water System" or "Water and Ice Dispensers."
NOTE: Allow 24 hours to produce the first batch of ice. Allow 3 days to completely fill ice container.
Jsi ............
Temperature Control Adjustment and Cooling On/Off
The refrigerator and freezer control buttons are located on the dispenser panel.
Cube _ FastCool
ICE LIGHT TEMPERATURE FILTER STATUS UNLOCKED FEATURES
Toturn cooling off, press and hold the LOCK and FAST ICE/COOL buttons at the same time for 3 seconds. Press and hold LOCK
and FAST ICE/COOL again to turn cooling on. Your refrigerator and freezer will not cool when cooling is off.
IMPORTANT: To avoid unintentionally locking the dispenser or changing other settings, be sure to press both buttons at exactly the same time.
For your convenience, your refrigerator and freezer controls are preset at the factory. When you first install your refrigerator, make
sure that the controls are still set to the "mid-settings." Toview set points, press the TEMPERATURE button on your
dispenser panel. The factory recommended set points are 0°F (-18°C) for the freezer and 37°F (3°C) for the refrigerator.
IMPORTANT:
Wait 24 hours before you put food into the refrigerator. If you
add food before the refrigerator has cooled completely, your food may spoil.
NOTE: Adjusting the set points to a higher (colder) than recommended setting will not cool the compartments any
faster.
If the temperature is too warm or too cold in the refrigerator or freezer, first check the air vents to be sure they are not blocked before adjusting the controls.
The preset settings should be correct for normal household usage. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm.
Wait at least 24 hours between adjustments. Recheck the temperatures before other adjustments are made.
The display screen on the dispenser control panel has a backlight, which will turn off automatically when the control
buttons have not been used for 30 seconds or more. When the backlight is off, the first press of a control button will only
reactivate the backlight, without changing any settings. Within 30 seconds after the backlight has been reactivated,
additional presses of control buttons will change the applicable settings.
_ 8 Fast Ice
Adjusting the Controls
To adjust the set points, press and hold the TEMPERATURE button for 3 seconds. When adjust mode is activated, set points and adjusting information will appear on the display screen.
FREEZER REFRIGERATOR
X
(" "1 SET/EXIT °F /% (*
NOTE: To view Celsius temperatures, press the FILTER button
when adjust mode is activated. To return the display setting to Fahrenheit, press FILTER again.
Refrigerator Controls
When adjust mode is activated, the LOCK and FAST ICE/COOL buttons adjust the refrigerator compartment temperature. The set point range for the refrigerator is 33°F to 45°F (0°C to 7°C).
Press LOCK to lower the set point.
Press FAST ICE/COOL to raise the set point.
Freezer Controls
When adjust mode is activated, the ICE and LIGHT buttons adjust the freezer compartment temperature. The set point range for the
freezer is -5°F to 5°F (-21 °C to -15°C).
Press ICE to lower the set point.
Press LIGHT to raise the set point.
CONDITION: TEMPERATURE
ADJUSTMENT:
REFRIGERATOR too cold REFRIGERATOR Setting
1° higher
REFRIGERATOR too warm REFRIGERATOR Setting
1° lower
Fast Cool & Fast Ice The Fast Cool feature assists with periods of heavy ice usage, full
grocery loads, or temporarily warm room temperatures. The Fast Ice feature assists with temporary periods of heavy ice
use by increasing ice production over a 24-hour period.
Press the FAST ICE/COOL button to turn on the Fast Cool feature. When the feature turns on, the "Fast Cool" animation
will appear on the dispenser display.
The Fast Cool setting will remain on for 24 hours unless manually turned off.
Press FAST ICE/COOL again to turn off Fast Cool and turn on the Fast Ice feature. When the feature turns on, the "Fast Ice"
animation will appear on the dispenser display.
dd
Ibtlp
=P,dP
The Fast Ice setting will remain on for 24 hours unless manually turned off.
Press FAST ICE/COOL a third time to activate Fast Cool and Fast Ice at the same time. When the features are activated, both the "Fast Cool" and "Fast Ice" animations will appear on
the dispenser display.
Press FAST ICE/COOL a fourth time to turn both Fast Cool and Fast Ice off.
When Fast Cool and/or Fast Ice are active, the temperature display will not change. After 24 hours, the refrigerator returns to the previous temperature set points.
NOTE: If increased ice production is desired at all times, change the freezer control to a lower setting. Setting the freezer to a
colder temperature may make some foods, such as ice cream, harder.
6th Sense TM Temperature Management
The 6th Sense TM feature assists with regulating the temperature inside the refrigerator. Ifa large quantity of warm food is placed in
the refrigerator or warm air enters the refrigerator while the door is held open, 6th Sense TM activates to quickly restore the
temperature to the set point.
FREEZER too cold FREEZER Setting
1° higher
FREEZER too warm/too little ice FREEZER Setting
1° lower
Press TEMPERATURE to exit adjust mode, or allow about 15 seconds of inactivity and adjust mode will turn off automatically.
Additional Features
NOTE: The display screen on the dispenser control panel has a
backlight, which will turn off automatically when the control buttons have not been used for 30 seconds or more. When the
backlight is off, the first press of a control button will only reactivate the backlight, without changing any settings. Within
30 seconds after the backlight has been reactivated, additional presses of control buttons will change the applicable settings.
NOTE: 6th Sense TM is always on when your refrigerator is operating. You do not need to press any buttons to activate it. The 6th Sense TM icon on the dispenser display screen indicates that the feature has automatically activated.
Temperature Display Always On
This feature keeps the temperature display on at all times.
Press and hold TEMPERATURE and LOCK at the same time for 3 seconds to turn the feature on.
IMPORTANT: To avoid unintentionally locking the dispenser or changing other settings, be sure to press both buttons at
exactly the same time.
Press and hold TEMPERATURE and LOCK at the same time for 3 seconds again to turn the feature off.
Door Ajar Alarm
The Door Ajar Alarm feature sounds an alarm when the refrigerator or freezer door is open for 5 minutes and the product cooling is turned on. The alarm will repeat every 2 minutes. Close both
doors to turn it off. The feature then resets and will reactivate when either door is left open again for 5 minutes.
Disabling Sounds
To turn off all dispenser and control sounds, including the Door Ajar Alarm, press and hold ICE and FAST ICE/COOL at
the same time for 3 seconds.
To turn all sounds back on, press and hold ICE and FAST ICE/ COOL at the same time for 3 seconds again.
The control can be adjusted to properly chill meats or vegetables. The air inside the pan is cooled to avoid "spot" freezing and can
be set to keep meats at the National Livestock and Meat Board recommended storage temperatures of 28° to 32°F (-2° to 0°C). The convertible vegetable/meat drawer control comes preset at the lowest meat setting.
To store meat:
Set the control to one of the three MEAT settings to store meat at its optimal storage temperature.
To store vegetables:
Set the control to VEG to store vegetables at their optimal storage temperatures.
NOTE: If food starts to freeze, move the control to the left (less cold). Remember to wait 24 hours between adjustments.
You can control the amount of humidity in the moisture-sealed crisper. Adjust the control to any setting between LOW and HIGH.
LOW (open) for best storage of fruits and vegetables with skins. HIGH (closed) for best storage of fresh, leafy vegetables.
Depending on your model, you may have one or more of the following options: the ability to select either crushed or cubed ice, a special light that turns on when you use the dispenser, or a lock
option to avoid unintentional dispensing.
NOTES:
The dispensing system will not operate when the freezer door is open.
After connecting the refrigerator to a water source, flush the water system. Use a sturdy container to depress and hold the water dispenser lever for 5 seconds, then release it for 5 seconds. Repeat until water begins to flow. Once water
begins to flow, continue depressing and releasing the dispenser lever (5 seconds on, 5 seconds off) for an additional
2 minutes. This will flush air from the filter and water dispensing system. Additional flushing may be required in some households. As air is cleared from the system, water
may spurt out of the dispenser.
Allow 24 hours for the refrigerator to cool down and chill water.
Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced.
The display screen on the dispenser control panel has a backlight, which will turn off automatically when the control
buttons have not been used for 30 seconds or more. When the backlight is off, the first press of a control button will only
reactivate the backlight, without changing any settings. Within 30 seconds after the backlight has been reactivated,
additional presses of control buttons will change the applicable settings.
Cool air from the freezer is directed to the refrigerator door bin directly beneath the vents.
NOTE: The dairy compartment and can rack are not associated with the Chilled Door Bin feature.
Chilled Door Bin Control
The chilled door bin control is located on the left-hand side of the refrigerator compartment.
Slide the door chill control to the left to reduce the flow of cold air to the bin and make it less cold.
Slide the door chill control to the right to increase the flow of cold air to the bin and make it colder.
The Water Dispenser
IMPORTANT: Dispense enough water every week to maintain a
fresh supply.
To Dispense Water:
1. Press a sturdy glass against the water dispenser lever.
2. Remove the glass to stop dispensing.
The Ice Dispenser
Ice dispenses from the ice maker storage bin in the freezer when the dispenser lever is pressed. The dispensing system will not
operate when the freezer door is open. To turn off the ice maker, see "Ice Maker and Storage Bin."
Your ice maker can produce both crushed and cubed ice. Before dispensing ice, select which type of ice you prefer by pressing the
ICE button. The display screen indicates which type of ice is selected.
"""
CRUSHED CUBED
For crushed ice, cubes are crushed before being dispensed. This may cause a slight delay when dispensing crushed ice. Noise
from the ice crusher is normal, and pieces of ice may vary in size. When changing from crushed to cubed, a few ounces of crushed ice will be dispensed along with the first cubes.
To Dispense Ice:
1. Press the button to select the desired type of ice.
Cut Hazard
Use a sturdy glass when dispensing ice. Failure to do so can result in cuts.
2. Press a sturdy glass against the ice dispenser lever. Hold the glass close to the dispenser opening so ice does not fall outside of the glass.
IMPORTANT: You do not need to apply a lot of pressure to the lever in order to activate the ice dispenser. Pressing hard will
not make the ice dispense faster or in greater quantities.
3. Remove the glass to stop dispensing. NOTE: Ice may continue to dispense for up to 10 seconds
after removing the glass from the lever. The dispenser may continue to make noise for a few seconds after dispensing.
The Dispenser Light (on some models)
Turning the Ice Maker On/Off
The On/Off switch is located on the top right-hand side of the freezer compartment.
Toturn on the ice maker, slide the control to the ON (left) position. To manually turn off the ice maker, slide the control to the OFF
(right) position. NOTE: Your ice maker has an automatic shutoff. The ice maker
sensors will automatically stop ice production, but the control will remain in the ON (left) position.
REMEMBER:
Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced.
The quality of your ice will be only as good as the quality of the water supplied to your ice maker. Avoid connecting the ice maker to a softened water supply. Water softener chemicals (such as salt) can damage parts of the ice maker and lead to
poor quality ice. If asoftened water supply cannot be avoided, make sure the water softener is operating properly and is well
maintained.
Do not use anything sharp to break up the ice in the storage bin. This can cause damage to the ice container and the
dispenser mechanism.
Do not store anything on top of or in the ice maker or storage bin.
When you use the dispenser, the light will automatically turn on. If you want the light to be on continuously, you may choose either
ON or DIM. The display screen indicates which mode is selected.
ON DIM OFF
ON: Press LIGHT to turn the dispenser light on. DIM: Press LIGHT a second time to select DIM mode. The dispenser light will remain on, but at a lower intensity.
OFF: Press LIGHT a third time to turn the dispenser light off. The dispenser lights are LEDs that can not be changed. If it
appears that your dispenser lights are not working, see "Troubleshooting" for more information.
The Dispenser Lock (on some models)
The dispenser can be turned off for easy cleaning or to avoid unintentional dispensing by small children and pets.
NOTE: The lock feature does not shut off power to the refrigerator, to the ice maker, or to the dispenser light. It simply deactivates the dispenser controls and levers. To turn off the ice maker, see "Ice Maker and Storage Bin."
Press and hold LOCK for 3 seconds to lock the dispenser.
Press and hold LOCK a second time to unlock the dispenser. The display screen indicates when the dispenser is locked.
Removing and Replacing Ice Storage Bin
1. Hold the base of the storage bin with both hands and press the release button to lift the storage bin up and out.
NOTE: It is not necessary to turn the ice maker control to the OFF (right) position when removing the storage bin. The
sensor cover ("flipper door") on the left wall of the freezer stops the ice maker from producing ice if the door is open or the storage bin is removed.
2. Replace the storage bin on the door and push down to make sure it is securely in place.
LOCKED UNLOCKED
_i_ _ _,,_ 4,_,_ ,,_,_,,,_ _
Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or
I
after the system.
Water Filter Status Light (on some models)
The water filter status light will help you know when to change your water filter. When the water filter status display changes from "GOOD" to "ORDER," this tells you that it is almost time to change the water filter cartridge. Replace the water filter cartridge when the water filter status display changes to "REPLACE." If
water flow to your water dispenser or ice maker decreases noticeably, change the filter sooner. The filter should be replaced at least every 6 months depending on your water quality and
usage. After changing the water filter, reset the status light by pressing
and holding the FILTER button for 3 seconds. The status light will change from "REPLACE" to "GOOD" when the system is reset.
REFRIGERATORCARE
Explosion Hazard
Use nonflammable cleaner. Failure to do so can result in death, explosion, or fire.
Changing the Water Filter
1. Press the eject button to release the filter from the base grille.
2. Pull the filter straight out.
3. Turn the cap counterclockwise to remove it from the filter. IMPORTANT: Do not discard the cap. It is part of your
refrigerator. Keep the cap to use with the replacement filter.
4. Align the ridge on the cap with the arrow on the new filter and turn the cap until it snaps into place.
NOTE: You can run the dispenser without a filter. Your water will not be filtered. Simply insert the cap all of the way into the base grille and rotate the cap until it is firmly in place.
5. Remove the protective covers from the O-rings. Be sure the O-rings are still in place after the covers are removed.
6. Push the filter into the base grille. The eject button will pop back out when the filter is fully engaged.
7. Flush the water system. See "Water and Ice Dispensers."
3=
Wash stainless steel and painted metal exteriors with a clean sponge or soft cloth and a mild detergent in warm water.
4.
There is no need for routine condenser cleaning in normal home operating environments. If the environment is
particularly greasy or dusty, or there is significant pet traffic in the home, the condenser should be cleaned every 2 to 3 months to ensure maximum efficiency.
If you need to clean the condenser:
Removethe base grille.
Use a vacuum cleaner with a soft brush to clean the grille,
the open areas behind the grille and the front surface area of the condenser.
Replace the base grille when finished.
5=
Plug in refrigerator or reconnect power.
Both the refrigerator and freezer sections defrost automatically. However, clean both sections about once a month to avoid
buildup of odors. Wipe up spills immediately. IMPORTANT: Because air circulates between both sections, any
odors formed in one section will transfer to the other. You must thoroughly clean both sections to eliminate odors. To avoid odor
transfer and drying out of food, wrap or cover foods tightly. To Clean Your Refrigerator:
NOTE: Do not use abrasive or harsh cleaners such as window sprays, scouring cleansers, flammable fluids, cleaning waxes, concentrated detergents, bleaches or cleansers containing
petroleum products on plastic parts, interior and door liners or gaskets. Do not use paper towels, scouring pads, or other harsh cleaning tools.
1. Unplug refrigerator or disconnect power.
2. Hand wash, rinse, and dry removable parts and interior surfaces thoroughly. Use a clean sponge or soft cloth and a mild detergent in warm water.
:°.4, :_, ....
NOTE: Not all bulbs will fit your refrigerator. Be sure to replace the bulb with one of the same size, shape and wattage. Replacement bulbs are available from your dealer.
The dispenser lights are LEDs that can not be changed.
All other lights require a 40-watt bulb.
1. Unplug refrigerator or disconnect power.
2. Remove light shield when applicable. NOTE: To clean the light shield, wash it with warm water and
liquid detergent. Rinse and dry the shield well.
3. Remove light bulb and replace with one of the same size, shape and wattage.
4. Replace light shield when applicable.
5. Plug in refrigerator or reconnect power.
TROUBLESHOOTING
First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)
to possibly avoid the cost of a service call.
In the U.S.A., www.whirlpool.com In Canada, www.whirlpool.ca
The refrigerator will not operate
Electrical Shock Hazard
Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.
Do not use an extension cord. Failure to follow these instructions can result in death,
fire, or electrical shock.
Power cord unplugged? Plug into a grounded 3 prong outlet,
Is outlet working? Plug in a lamp to see if the outlet is working,
Household fuse blown or circuit breaker tripped? Replace the fuse or reset the circuit breaker. Ifthe problem continues,
call an electrician. Are controls on? Make sure the refrigerator controls are on,
See "Using the Controls." New installation? Allow 24 hours following installation for the
refrigerator to cool completely. NOTE: Adjusting the temperature controls to coldest setting
will not cool either compartment more quickly.
Rattling - flow of refrigerant, water line, or from items placed on top of the refrigerator
Sizzling/Gurgling - water dripping on the heater during defrost cycle
Popping - contraction/expansion of inside walls, especially during initial cool-down
Water running - may be heard when water melts during the defrost cycle and runs into the drain pan
Creaking/Cracking - occurs as ice is being ejected from the ice maker mold,
The doors will not close completely
Door blocked open? Move food packages away from door.
Bin or shelf in the way? Push bin or shelf back in the correct position.
The doors are difficult to open
Explosion Hazard
Use nonflammable cleaner. Failure to do so can result in death, explosion, or fire.
Are the gaskets dirty or sticky? Clean gaskets with mild soap and warm water.
The motor seems to run too much
Your new refrigerator may run longer than your old one due to its high-efficiency compressor and fans. The unit may run even longer if the room is warm, a large food load is added, doors are
opened often, or if the doors have been left open.
The refrigerator is noisy
Refrigerator noise has been reduced over the years. Due to this reduction, you may hear intermittent noises from your new
refrigerator that you did not notice from your old model. Below are listed some normal sounds with an explanation.
Buzzing - heard when the water valve opens to fill the ice maker
Pulsating - fans/compressor adjusting to optimize performance
10
The lights do not work
Is a light bulb loose in the socket or burned out? See "Changing the Light Bulbs."
Is the dispenser light set to OFF? The dispenser light will operate only when the levers are pressed. If you want the
dispenser light to stay on continuously, set the dispenser light to ON, or NIGHT LIGHT or AUTO or HALF or DIM. See "Water
and Ice Dispensers."
Is the dispenser light set to NIGHT LIGHT or AUTO? If the dispenser is set to the NIGHT LIGHT or AUTO mode, be sure the dispenser light sensor is not blocked, See "Water and Ice
Dispensers."
Loading...
+ 22 hidden pages