Whirlpool GD5RHAXSQ00, ES5PHAXSQ00, ES2FHAXSB00, ED5PHAXST00, ED5PHAXSB00 Owner’s Manual

...
REFRIGERATORUSE&CAREGUIDE
MANUALDEUSOYCUIDADODELREFRIGERADOR
p p
GUIDED'UTILISATIONETD ENTRETIENDUREFRIGERATEUR
Table of Contents /Indice / Table des matibres
REFRIGERATOR SAFETY ............................... 2
INSTALLATION INSTRUCTIONS ................... 3
REFRIGERATOR USE ..................................... 5
REFRIGERATOR CARE ................................... 8
TROUBLESHOOTING ...................................... 8
WATER FILTER CERTIFICATIONS .............. 10
PRODUCT DATA SHEETS ............................ 11
WARRANTY .................................................... 12
If you need assistance or service, first see the "Troubleshooting" section. Additional help is available. Call us at 1-800-253-1301
from anywhere in the U.S.A., or write:
Whirlpool Corporation
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022-2692
In Canada, for installation and service call, 1-800-807-6777. For assistance call 1-800-461-5681 Monday to Friday 8:00 a.m. - 6:00 p.m. (EST), Saturday 8:30 - 4:30 p.m. (EST), or write:
Whirlpool Canada LP
Customer Interaction Centre
1901 Minnesota Court
Mississauga, Ontario L5N 3A7
Information may also be obtained by visiting our website at
www.whirlpool.com.
In Canada, visit www.whirlpoolappliances.ca.
Please include a daytime phone number in your correspondence. Keep this book and your sales slip together for future
reference. You must provide proof of purchase or installation date for in-warranty service.
AYUDA O SERVICIO TF:CNICO .................... 13
SEGURIDAD DEL REFRIGERADOR ............ 13
INSTRUCCIONES DE INSTALACION .......... 14
USO DE SU REFRIGERADOR ...................... 17
CUIDADO DE SU REFRIGERADOR ............. 20
SOLUCION DE PROBLEMAS ....................... 21
HOJA DE DATOS DEL PRODUCTO ............ 23
GARANTiA ...................................................... 24
Write down the following information about your appliance to help you obtain assistance or service if you ever need it. You will need
to know your complete model number and serial number. You can find this information on the model and serial number label, located on the inside wall of the refrigerator compartment.
Dealer name Serial number
Address Phone number Model number
Purchase date
Toorder replacement filters, call 1-800-442-9991 and ask for the appropriate part number listed below or contact your authorized Whirlpool dealer. In Canada, call 1-800-807-6777.
Stainless Steel Cleaner and Polish: Order Part #4396095 Standard Filter: Order Part #4396710 (T1RFWB2)
ASSISTANCE OU SERVICE .......................... 25
SleCURITle DU RleFRIGleRATEUR ................ 25
INSTRUCTIONS D'INSTALLATION .............. 26
UTILISATION DU RleFRIGleRATEUR ........... 29
ENTRETIEN DU RleFRIGleRATEUR ............. 32
DlePANNAGE .................................................. 33
FEUILLES DE DONNleES
SUR LE PRODUlT .......................................... 35
GARANTIE ...................................................... 36
2315220
TOD0 L0 eUE IMAGINAS"
REFRIGERATORSAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electric shock, or injury when using your refrigerator, follow these basic precautions:
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Disconnect power before servicing.
Replace all parts and panels before operating.
Remove doors from your old refrigerator.
SAVE THESE INSTRUCTIONS
Use nonflammable cleaner.
Keep flammable materials and vapors, such as gasoline, away from refrigerator.
Use two or more people to move and install refrigerator.
Disconnect power before installing ice maker (on ice maker
kit ready models only).
Use a sturdy glass when dispensing ice or water (on some
models).
ProperDisposal ofYourOldRefrigerator
Suffocation Hazard
Remove doors from your old refrigerator. Failure to do so can result in death or brain damage.
IMPORTANT: Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigerators are still dangerous
- even if they will sit for "just a few days." Ifyou are getting rid of your old refrigerator, please follow these instructions to help
prevent accidents.
Before you throw away your old refrigerator or freezer:
Take off the doors.
Leave the shelves in place so that children may not easily climb inside.
INSTALLATIONINSTRUCTIONS
NOTE: It is recommended that you do not install the refrigerator near an oven, radiator, or other heat source. Do not install in a location where the temperature will fall below 55°F (13°C).
Excessive Weight Hazard
Use two or more people to move and install refrigerator.
Failure to do so can result in back or other injury.
Remove packaging materials. Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove
tape or glue. These products can damage the surface of your
refrigerator. For more information, see the "Refrigerator Safety" section.
When Moving Your Refrigerator: Your refrigerator is heavy. When moving the refrigerator
for cleaning or service, be sure to protect the floor. Always pull the refrigerator straight out when moving it.
Do not wiggle or "walk" the refrigerator when trying to move it, as floor damage could occur.
important information to know about glass shelves
and covers:
Do not clean glass shelves or covers with warm water when
they are cold. Shelves and covers may break if exposed to
sudden temperature changes or impact, such as bumping. For your protection, tempered glass is designed to shatter
into many small, pebble-size pieces. This is normal. Glass shelves and covers are heavy. Use special care when removing them to avoid impact from dropping.
_Jl,
/
,Z
/
!
J
/
2" (5.08 cm)
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong. Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
Explosion Hazard
Keep flammable materials and vapors, such as gasoline, away from refrigerator.
Failure to do so can result in death, explosion, or fire.
To ensure proper ventilation for your refrigerator, allow for 1/2"
(1.25 cm) space on each side and at the top. When installing your refrigerator next to a fixed wall, leave 2" (5.08 cm) minimum on
each side (depending on your model) to allow for the door to swing open. If your refrigerator has an ice maker, allow extra space at the back for the water line connections.
Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical connection.
Recommended Grounding Method
A 115 Volt, 60 Hz., AC only 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet
that cannot be turned off by a switch. Do not use an extension cord.
NOTE: Before performing any type of installation, cleaning, or removing a light bulb, turn the control (Thermostat, Refrigerator or Freezer Control depending on the model) to OFF and then
disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and reset the control (Thermostat, Refrigerator or Freezer Control
depending on the model) to the desired setting.
Readalldirectionsbeforeyoubegin. IMPORTANT:
Ifyouturntherefrigeratoronbeforethewaterlineis connected,turntheicemakerOFE
Allinstallationsmustmeetlocalplumbingcoderequirements.
Usecoppertubingandcheckforleaks.Installcoppertubing onlyinareaswherethehouseholdtemperatureswillremain
abovefreezing.
TOOLSNEEDED:Flat-bladescrewdriver,7_6"and1/2"open-end
wrenchesortwoadjustablewrenches,1/4"nutdriveranddrillbit, handdrillorelectricdrill(properlygrounded).
NOTE:Yourrefrigeratordealerhasakitavailablewitha1/4" (6.35mm)saddle-typeshutoffvalve,aunion,andcoppertubing. Beforepurchasing,makesureasaddle-typevalvecomplieswith
yourlocalplumbingcodes.Donotuseapiercing-typeor3/16"
(4.76mm)saddlevalvewhichreduceswaterflowandclogsmore easily.
WaterPressure
Acoldwatersupplywithwaterpressureofbetween30and
120psi(207-827kPa)isrequiredtooperatethewaterdispenser andicemaker.Ifyouhavequestionsaboutyourwaterpressure, callalicensed,qualifiedplumber.
ReverseOsmosisWaterSupply IMPORTANT:Thepressureofthewatersupplycomingoutofa
reverseosmosissystemgoingtothewaterinletvalveofthe refrigeratorneedstobebetween30and120psi(207-827kPa).
Ifareverseosmosiswaterfiltrationsystemisconnectedtoyour coldwatersupply,thewaterpressuretothereverseosmosis systemneedstobeaminimumof40to60psi(276-414kPa).
Ifthewaterpressuretothereverseosmosissystemislessthan 40to60psi(276-414kPa):
Checktoseewhetherthesedimentfilterinthereverse osmosissystemisblocked.Replacethefilterifnecessary.
Allowthestoragetankonthereverseosmosissystemtorefill afterheavyusage.
Ifyourrefrigeratorhasawaterfiltercartridge,itmayfurther reducethewaterpressurewhenusedinconjunctionwitha
reverseosmosissystem.Removethewaterfiltercartridge. See"WaterFiltrationSystem."
Ifyouhavequestionsaboutyourwaterpressure,callalicensed, qualifiedplumber.
Determinethelengthofcoppertubingyouneed.Measure fromtheconnectiononthelowerrearcorneroftherefrigerator
tothewaterpipe.Add7ft(2.1m)toallowforcleaning.Use 1/4"(6.35mm)O.D.(outsidediameter)coppertubing.Besure bothendsofcoppertubingarecutsquare.
Usingagroundeddrill,drilla1/4"(6.35mm)holeinthecold waterpipeyouhaveselected.
......................A
F E D v
A. Cold water pipe E.Compression sleeve B.Pipe clamp F Shutoff valve C. Copper tubing G.Packing nut D.Compression nut
6. Fasten shutoff valve to cold water pipe with pipe clamp. Be sure outlet end is solidly in the 1/4"(6.35 mm) drilled hole in the water pipe and that washer is under the pipe clamp. Tighten packing nut. Tighten the pipe clamp screws slowly and evenly
so the washer makes a watertight seal. Do not overtighten or you may crush the copper tubing.
7. Slip the compression sleeve and compression nut on the copper tubing as shown. Insert the end of the tubing into the
outlet end squarely as far as it will go. Screw the compression nut onto the outlet end with an adjustable wrench. Do not overtighten.
8. Place the free end of the tubing into a container or sink, and turn ON main water supply and flush out the tubing until water
is clear. Turn OFF the shutoff valve on the water pipe. Coil the copper tubing.
Connect to Refrigerator
Style 1
1. Unplug refrigerator or disconnect power.
2. Remove the shipping tape from the gray, coiled water tubing on the rear of the refrigerator.
3. A 1/4"x 1/4"coupling is needed to order to connect the water tubing to an existing household water supply line. Thread the
provided nut onto the coupling on the end of the copper tubing.
NOTE: Tighten the nut by hand. Then tighten it with a wrench two more turns. Do not overtighten.
Read all directions before you begin. IMPORTANT: If you turn the refrigerator on before the water line is
connected, turn the ice maker OFE
Connect to Water Line
1. Unplug refrigerator or disconnect power.
2. Turn OFF main water supply. Turn ON nearest faucet long enough to clear line of water.
3. Locate a 1/2"(12.70 mm) to 11/4"(3.18 cm) vertical cold water pipe near the refrigerator.
IMPORTANT:
Make sure it is a cold water pipe.
Horizontal pipe will work, but drill on the top side of the
pipe, not the bottom. This will help keep water away from the drill and normal sediment from collecting in the valve.
A B C D E F G
A. Refrigerator water tubing E.Ferrule (purchased)
B.Nut (provided) F Nut (purchased)
C.Bulb G.Household water line D.Coupling (provided)
4.
Turn shutoff valve ON.
5.
Check for leaks. Tighten any nuts or connections (including connections at the valve) that leak.
Style 2
1. Unplug refrigerator or disconnect power.
2. Remove the shipping tape from the gray, coiled water tubing on the rear of the refrigerator.
3. Threadtheprovidednutontothewatervalveasshown, NOTE:Tightenthenutbyhand.Thentightenitwithawrench
twomoreturns,Donotovertighten.
A
B
A.Bulb B.Nut (provided)
4. Turn shutoff valve ON.
5. Check for leaks. Tighten any nuts or connections (including connections at the valve) that leak.
Complete the Installation
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong. Do not use an adapter.
Do not use an extension cord. Failure to follow these instructions can result in death,
fire, or electrical shock.
1. Plug in refrigerator or reconnect power.
2. Flush the water system. See "Water and Ice Dispensers."
NOTE: It may take up to 24 hours for your ice maker to begin producing ice.
Style 2
IMPORTANT:
Your product will not cool when the REFRIGERATOR Control is set to OFE
The Refrigerator Control adjusts the refrigerator compartment temperature. The Freezer Control adjusts the freezer
compartment temperature. Settings to the left of the mid- setting make the temperature less cold. Settings to the right of the mid-setting make the temperature colder.
Wait 24 hours before you put food into the refrigerator. If you add food before the refrigerator has cooled completely, your food may spoil.
Style 1
Turn the control to the right (clockwise) to make the compartment colder or to the left (counterclockwise) to make it less cold.
Style 2
1. Push control button on the side of the control box and release it.
2. The control will pop out. Turn the control to the desired setting.
3. Push the control in to lock it into place.
NOTE: Adjusting the Refrigerator and Freezer Controls to a higher (colder) than recommended setting will not cool the
compartments any faster.
Adjusting Controls
Give the refrigerator time to cool down completely before adding food. It is best to wait 24 hours before you put food into the
refrigerator. The settings indicated in the previous section should be correct for normal household refrigerator usage. The controls are set correctly when milk or juice is as cold as you like and when
ice cream is firm. If you need to adjust temperatures in the refrigerator or freezer,
use the settings listed in the chart below as a guide. Wait at least 24 hours between adjustments.
CONDITION/REASON: ADJUSTMENT:
REFRIGERATORUSE
For your convenience, your refrigerator controls are preset at the
factory. When you first install your refrigerator, make sure that the
controls are still preset. The Refrigerator Control and the Freezer Control should both be set to the "mid-settings."
Style I
COLD
FREEZER
n
COLDER COLD
REFRIGERATOR
I
1"!_0 L COI"DER
REFRIGERATOR too warm REFRIGERATOR
Control one setting higher
FREEZER too warm/too little ice FREEZER Control
one setting higher
REFRIGERATOR too cold REFRIGERATOR
Control one setting lower
FREEZER too cold FREEZER Control
one setting lower
Thecontrolcanbeadjustedtoproperlychillmeatsorvegetables. Theairinsidethepaniscooledtoprevent"spot"freezingandcan
besettokeepmeatsattheNationalLivestockandMeatBoard
recommendedstoragetemperaturesof28°to32°F(-2°to0°C). Theconvertiblevegetable/meatdrawercontrolcomespresetat thelowestmeatsetting.
To store meat:
Set the control to one of the three MEAT settings to store meat at
its optimal storage temperature. To store vegetables:
Set the control to VEG to store vegetables at their optimal storage temperatures.
NOTE: If food starts to freeze, move the control to the left (less
cold). Remember to wait 24 hours between adjustments.
Cut Hazard
Use a sturdy glass when dispensing ice or water. Failure to do so can result in cuts.
The Water Dispenser
You can control the amount of humidity in the moisture-sealed
crisper. Adjust the control to any setting between LOW and HIGH.
LOW (open) for best storage of fruits and vegetables with skins.
HIGH (closed) for best storage of fresh, leafy vegetables.
Cool air from the freezer is directed to the refrigerator door bin
directly beneath the vents.
NOTE: The dairy compartment and can rack are not associated
with the Chilled Door Bin feature.
Chilled Door Bin Control
The chilled door bin control is located on the left-hand side of the
refrigerator compartment.
A. Door chill control
Turn the control clockwise (right) to reduce the flow of cold air to the bin and make it less cold.
Turn the control counterclockwise (left) to increase the flow of cold air to the bin and make it colder.
IMPORTANT:
The dispensing system will not operate when the freezer door is open.
After connecting the refrigerator to a water source, flush the water system by dispensing water into a sturdy container until you draw and discard 2 to 3 gal. (8 to 12 L) of water, or for approximately 5 minutes after the water begins dispensing.
The flushing process cleans the water system and clears air from the lines. As the air is cleared from the lines, water may spurt out of the dispenser.
Allow several hours for the refrigerator to cool down and chill water.
Dispense enough water every week to maintain afresh supply.
To Dispense Water:
1. Press a sturdy glass against the water dispenser lever.
2. Remove the glass to stop dispensing.
The Ice Dispenser
The dispensing system will not operate when the freezer door is open. Ice dispenses from the ice maker storage bin in the freezer when the dispenser lever is pressed.
Depending on your model, you may have one or more of the following options: the ability to select either crushed or cubed ice,
a special light that turns on when you use the dispenser, or a lock option to avoid unintentional dispensing.
NOTE: Some models dispense both cubed and crushed ice. Before dispensing ice, select which type of ice you prefer.
For crushed ice, cubes are crushed before being dispensed. This may cause a slight delay when dispensing crushed ice. Noise
from the ice crusher is normal, and pieces of ice may vary in size. When changing from crush to cube, a few ounces of crushed ice will be dispensed along with the first cubes.
To Dispense Ice:
1. Press the button to select the desired type of ice.
2. Press a sturdy glass against the ice dispenser lever. Hold the glass close to the dispenser opening so ice does not fall outside of the glass.
IMPORTANT: You do not need to apply a lot of pressure to the lever in order to activate the ice dispenser. Pressing hard will
not make the ice dispense faster or in greater quantities.
3. Remove the glass to stop dispensing.
The Dispenser Light
Removing and Replacing Ice Storage Bin
Style 1: The dispenser light can be turned on by pressing the ON
button. Style 2: When you use the dispenser, the lever will automatically
turn the light on. If you want the light to be on continuously, you
may choose either ON or NIGHT LIGHT. ON: Press the LIGHT button to turn the dispenser light on.
NIGHT LIGHT: Press the LIGHT button a second time to select
the Night Light. The dispenser light will automatically adjust to
become brighter as the room brightens, dimmer as the room darkens.
OFF: Press the LIGHT button a third time to turn the dispenser light off.
The dispenser lights are LEDs which should not need to be
changed. If it appears that your dispenser lights are not working, check to be sure that the light sensor is not blocked (in Night Light mode). See "Troubleshooting" for more information.
The Dispenser Lock (on some models)
Your dispenser can be turned off for easy cleaning or to prevent unintentional dispensing by small children and pets.
NOTE: The lock feature does not shut off power to the product, to
the ice maker, or to the dispenser light. It simply deactivates the
dispenser levers. The ice and water dispensers will not work. Style 1: Press the LOCK button to lock the dispenser. Press the
UNLOCK button to unlock the dispenser. Style 2: Press and hold the LOCK OUT button to lock the
dispenser. Press and hold the LOCK OUT button a second time to unlock the dispenser.
1. Hold the base of the storage bin with both hands and press the release button to lift the storage bin up and out.
NOTE: It is not necessary to turn the ice maker control to the OFF (right) position when removing the storage bin. The sensor cover ("flipper door") on the left wall of the freezer
stops the ice maker from producing ice if the door is open or the storage bin is removed.
2. Replace the storage bin on the door and push down to make sure it is securely in place.
NOTE: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or
after the system. Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts.
Water Filter Status Light (on some models)
The filter status light will help you know when to change your water filter. The light will change from green to yellow. This tells you that it is almost time to change the filter. It is recommended that you replace the filter when the status light changes to red OR
water flow to your water dispenser or ice maker decreases noticeably.
After changing the filter, reset the filter status light by pressing the button. The status light will change from red to green when the
system is reset.
Turning the Ice Maker On/Off
The ON/OFF switch is located on the top right-hand side of the freezer compartment.
To turn on the ice maker, slide the control to the ON (left) position. To manually turn off the ice maker, slide the control to the OFF
(right) position. NOTE: Your ice maker has an automatic shutoff. The ice maker
sensors will automatically stop ice production, but the control will remain in the ON (left) position.
REMEMBER:
Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced.
The quality of your ice will be only as good as the quality of the water supplied to your ice maker. Avoid connecting the ice
maker to a softened water supply. Water softener chemicals (such as salt) can damage parts of the ice maker and lead to poor quality ice. If a softened water supply cannot be avoided, make sure the water softener is operating properly and is well maintained.
Do not use anything sharp to break up the ice in the bin or bucket. This can cause damage to the ice container and the
dispenser mechanism.
Do not store anything on top of or in the ice maker or storage bin.
Non-indicator Water Filter (on some models)
If your refrigerator does not have the status light, you should change the water filter every 6 months depending upon your
usage. If the water flow to the water dispenser or ice maker decreases noticeably before 6 months have passed, replace the
water filter more often.
Changing the Water Filter
1. Press the eject button to release the filter from the base grille.
2. Pull the filter straight out.
3. Turn the cap counterclockwise to remove it from the filter. IMPORTANT: Do not discard the cap. It is part of your
refrigerator. Keep the cap to use with the replacement filter.
4. Align the ridge on the cap with the arrow on the new filter and turn the cap until it snaps into place.
NOTE: You can run the dispenser without a filter. Your water will not be filtered. Simply insert the cap all of the way into the
base grille and rotate the cap until it is firmly in place.
5. Remove the protective covers from the O-rings.
6. Push the filter into the base grille. The eject button will pop back out when the filter is fully engaged.
7. Flush the water system. See "Water and Ice Dispensers."
REFRIGERATORCARE
Explosion Hazard
Use nonflammable cleaner. Failure to do so can result in death, explosion, or fire.
Both the refrigerator and freezer sections defrost automatically. However, clean both sections about once a month to prevent odors from building up. Wipe up spills immediately.
IMPORTANT: Because air circulates between both sections, any odors formed in one section will transfer to the other. You must
thoroughly clean both sections to eliminate odors. To prevent
odor transfer and drying out of food, wrap or cover foods tightly.
To Clean Your Refrigerator: NOTE: Do not use abrasive or harsh cleaners such as window
sprays, scouring cleansers, flammable fluids, cleaning waxes, concentrated detergents, bleaches or cleansers containing petroleum products on plastic parts, interior and door liners or gaskets. Do not use paper towels, scouring pads, or other harsh
cleaning tools.
1. Unplug refrigerator or disconnect power.
2. Hand wash, rinse, and dry removable parts and interior surfaces thoroughly. Use a clean sponge or soft cloth and a
mild detergent in warm water.
3.
Wash stainless steel and painted metal exteriors with a clean sponge or soft cloth and a mild detergent in warm water.
4.
There is no need for routine condenser cleaning in normal home operating environments. If the environment is
particularly greasy or dusty, or there is significant pet traffic in the home, the condenser should be cleaned every 2 to
3 months to ensure maximum efficiency. If you need to clean the condenser:
Removethe base grille.
Use a vacuum cleaner with a soft brush to clean the grille, the open areas behind the grille and the front surface area
of the condenser.
Replace the base grille when finished.
Plug in refrigerator or reconnect power.
NOTE: Not all bulbs will fit your refrigerator. Be sure to replace the bulb with one of the same size, shape and wattage. The dispenser light requires a heavy duty 10-watt bulb. All other lights require a
40-watt bulb. Replacement bulbs are available from your dealer.
1. Unplug refrigerator or disconnect power.
2. Remove light shield when applicable. NOTE: To clean the light shield, wash it with warm water and
liquid detergent. Rinse and dry the shield well.
3. Remove light bulb and replace with one of the same size, shape and wattage.
4. Replace light shield when applicable.
5. Plug in refrigerator or reconnect power.
TROUBLESHOOTING
Trythe solutions suggested here first in order to avoid the cost of an unnecessary service call.
The refrigerator isn't cooling
Are the temperature controls set at the mid-settings? The controls are preset at the factory to the correct mid-setting.
After connecting power, wait 1 hour before checking temperature.
NOTE: Adjusting the controls to coldest setting will not cool either compartment more quickly.
The lights do not work
Is the power supply cord unplugged? Plug into a grounded 3 prong outlet.
Is a light bulb loose in the socket or burned out? See "Changing the Light Bulbs."
Is the dispenser light set to ON? The dispenser light will operate only when the levers are pressed. If you want the dispenser light to stay on continuously, set the dispenser light
to ON, or NIGHT LIGHT. See "Water and Ice Dispensers."
Is the dispenser light set to NIGHT LIGHT? If the dispenser is set to the NIGHT LIGHT mode, be sure the dispenser light sensor is not blocked. See "Water and Ice Dispensers."
Temperature is too warm
Check the following:
Are the air vents blocked in either compartment?
Are the door(s) opened often?
Has a large amount of food just been added to the refrigerator or freezer?
Are the controls set correctly for the surrounding conditions?
The motor seems to run too much
Check the following:
Is the room temperature hotter than normal?
Has a large amount of food just been added to the refrigerator?
Are the doors opened often?
Are the doors not closed completely?
Are the condenser coils dirty?
NOTE: Your new refrigerator will run longer than your old one due to its high-efficiency motor.
There is interior moisture buildup
The ice dispenser will not operate properly
Check the following:
Are the air vents blocked in the refrigerator?
Are the door(s) opened often?
Is the room humid?
Are the controls set correctly for the surrounding conditions?
Was a self-defrost cycle completed?
The doors will net close completely
Check the following:
Are food packages blocking the door open?
Is the ice storage bin out of position?
Were the doors removed during product installation and not properly replaced?
The doors are difficult to open
Are the gaskets dirty or sticky? Clean gaskets with mild soap and warm water.
The ice maker is not producing ice or not enough ice
Check the following:
Is the ice maker wire shutoff arm or switch (depending on models) in the OFF position?
Is the water line shutoff valve to the refrigerator turned on?
Is the freezer temperature cold enough to produce ice? Wait 24 hours after ice maker hookup for ice production.
Has the ice maker just been installed? Wait 72 hours for full ice production to begin.
Does the ice maker mold have water in it or has no ice been produced? Make sure your refrigerator has been
connected to a water supply and the supply shutoff valve is turned on.
Has a large amount of ice just been removed? Allow 24 hours for ice maker to produce more ice.
Is there a water filter installed on the refrigerator? The filter may be clogged or installed incorrectly.
Is an ice cube jammed in the ice maker ejector arm? For models with an interior ice bin, remove the ice from the ejector arm with a plastic utensil. For models with an ice
storage bin located on the freezer door, access the ice maker by depressing the ice sensor door on the upper left side of the freezer interior. While depressing the sensor door, lift the ice
maker service door and remove the ice from the ejector with a plastic utensil.
Off-taste, odor or gray color in the ice
Check the following:
Are the plumbing connections new, causing discolored or off- flavored ice?
Have the ice cubes been stored too long?
Does the freezer and ice bin or bucket need to be cleaned?
Has food in the freezer or refrigerator been wrapped properly?
Does the water contain minerals (such as sulfur}? A filter may need to be installed to remove the minerals.
Is there a water filter installed on the refrigerator? Gray or dark discoloration in ice indicates that the water filtration
system needs additional flushing.
Check the following:
Is the freezer door closed completely?
Is the ice storage bin installed correctly?
Is there ice in the storage bin?
Has the ice frozen in the storage bin?
Is ice stuck in the delivery chute?
Has the wrong ice been added to the storage bin? Use only cubes produced by the current ice maker.
Has the ice melted around the auger (metal spiral} in the ice bucket? Dump the ice cubes and clean the ice storage
bin.
Is the ice dispenser stalling while dispensing "crushed" ice? Change the ice button from "crushed" to "cubed." If
cubed ice dispenses correctly, depress the button for "crushed" ice and begin dispensing again.
Has the dispenser arm been held in too long? Ice will stop dispensing when the arm is held in too long. Wait 3 minutes
for dispenser motor to reset before using again.
The water dispenser will not operate properly
Check the following:
Isthe water shutoff valve not turned on, incorrectly installed or clogged?
Is the water line connected at the source?
Is there a kink in the home water source line?
Has the water system not filled? The water system needs to be filled the first time it is used.
Is the refrigerator connected to a cold water line with water pressure of at least 30 psi? The water pressure to the home determines the flow from the dispenser.
Is there a water filter installed on the refrigerator? The filter may be clogged or incorrectly installed.
Water or ice is leaking from the dispenser
Check the following:
Is the glass not being held under the dispenser long enough?
Is an ice cube stuck in the chute and holding the trap door open?
The dispenser water is not cool enough
NOTE: Water from the dispenser is chilled to only 50°F (10°C).
Has the refrigerator been newly installed or a large amount of water recently dispensed? Allow 24 hours for the refrigerator to cool completely.
Has water not been recently dispensed? The first glass of water may not be cool. Discard the first glass of water.
WATERFILTERCERTIFICATIONS
State of California
Depart ment of llealth Ser_ ice,
Water Trealment Device
Certificate Number
04- 1635
Dale, Igg_lod A _HI _ 20{_
Trademark/Model Designation Roolaeemont Elemoltts
Atrazm_
Benz_n_ ;
o-Dic hchl,ofgbenzeii_ ; _ ndrin
Ethylbenze_14
Lindane
Monochtordfx:na'ne '1et rachloroetByle rte
Toxaphene
!
F1RFWB2
rtR_WB2
) C_!i ¸¸
Rated Serviee Capacity: 200 {aals RatedServict, Flow: 05{,pro
I>:1ilot _ where _a_l ¸is microbiolog_cal]y/resale _ with water of _nknown quality, except that systems certified _r
cys_ re_dac_ion may be used on disinfecled walers _at may _n_min hIlerable cysts
Conditions of Certification:
10
PRODUCTDATASHEETS
Base Grille Water Filtration System
Model TlWB2LfTIRFWB2 Capacity 200 Gallons (758 Liters)
Model TlWB2/TIRFWB2 Capacity 200 Gallons (758 Liters)
Tested and certified by NSF International against NSF/ANSI Standard 42 for the reduction of Chlorine Taste and Odor, Particulate Class I*;
and against NSF/ANSl Standard 53 for the reduction of Lead, Mercury, Atrazine, Benzene, Toxaphene, O-Dichlorobenzene,
Cysts, Turbidity, Asbestos, Lindane, Tetrachloroethylene, Endrin, Alachlor, Chlorobenzene and Fthylbenzene.
This system has been tested according to NSF/ANSl 42/53 for the reduction of the substances listed below. The concentration of the
indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSl 42/53.
Substance Reduction NSF Reduction Average Influent Challenge Maximum Average Minimum % Average %
Aesthetic Effects Requirements Influent Concentration Effluent Effluent Reduction Reduction
Chlorine Taste/Odor 50% reduction 2.0 mg/L 2.0 mg/L _+10% 0.08 mg/L ** 2.0 mg/L 95.93 97.36 Particulate Class I* 85% reduction 3533333#/mL At east 10,000 part c es/mL 22000 #/mL 11567 #/mL 99.38 99.67
Contaminant NSF Reduction Average Influent Challenge Maximum Average Minimum % Average % Reduction Requirements Influent Concentration Effluent Effluent Reduction Reduction
Lead: @ pH 6.5 0.010 mg/L 150 ug/L* 0.15 mg/L _+10% 1.0 ug/L 1 ug/L 99.33 99.33 Lead: @ pH 8.5 0.010 mg/L 157 ug/L * 0.15 mg/L _+10% 2.0 ug/L 1.08 ug/L 98.72 99.31
Mercury: @ pH 6.5 0.002 mg/L 0.0058 mg/L 0.006 mg/L _+10% 0.0002 mg/L 0.0002 mg/L 96.53 96.53 Mercury: @ pH 8.5 0.002 mg/L 0.0057 mg/L 0.006 mg/L _+10% 0.0002 mg/L 0.0002 mg/L 96.5 96.5
Benzene 0.005 mg/L 15 ug/L 0.015 mg/L _+10% 0.5 ug/L 0.5 ug/L 96.67 96.67
O-Dichlorobenzene 0.6 mg/L 1750 ug/L 1.8 _+10% 1.0 ug/L 1.0 ug/L 99.94 99.94 Toxaphene 0.003 mg/L 15 ug/L 0.015 _+10% 1.0 ug/L 1.0 ug/L 93.33 93.33 Atrazine 0.003 mg/L 10 ug/L 0.009 mg/L _+10% 2 ug/L 2 ug/L 80.8 80.8 Asbestos 99% 101 MFL 107to 108fibers/L tt 0.17 MFL 0.17 MFL 99.83 99.83
Live Cysts* >99.95% 120,000/L 50,000/L min. 8/L_ 1/L_ 99.99 >99.99 Turbidity 0.5 NTU 11.4 NTU 11 _+1 NTU 0.41 NTU 0.24 NTU 96.4 97.89
Alachlor 0.002 mg/L 41.3 ug/L 0.04 _+10% 0.2 ug/L 0.2 ug/L 99.52 99.52
Endrin 0.002 mg/L 5.9 ug/L 0.006 _+10% 0.5 ug/L 0.3 ug/L 91.5 95.47
Ethylbenzene 0.7 mg/L 1867 ug/L 2.1 _+10% 0.70 ug/L 0.0588 ug/L 99.96 100
Lindane 0.002 mg/L 1.9 ug/L 0.002 _+10% 0.02 ug/L 0.02 ug/L 98.93 98.93
Monochlorobenzene 0.6 mg/L 2.0 ug/L 2.0 _+10% 0.0005 ug/L 0.0005 ug/L 99.98 99.98 Tetrachloroethylene 0.005 mg/L 14.2 ug/L 0.015 _+10% 0.5 ug/L 0.5 ug/L 96.47 96.47
Test Parameters: pH = 7.5 _+0.5 unless otherwise noted. Flow = 0.5 gpm (1.9 Lpm). Pressure = 60 psig (413.7 kPa). Temp. = 68°F to
71.6°F (20°C to 22°C).
It is essential that operational, maintenance, and filter replacement requirements be carried out for the product to
perform as advertised.
Use replacement cartridge T1RFWB2, part #4396710. 2005 suggested retail price of $39.99 U.S.A./S49.99 Canada.
Prices are subject to change without notice. Model T1WB2L: Style 1 - When the filter indicator reads 10%,
order a new filter. When the filter indicator reads 0%, it is recommended that you replace the filter.
Style 2 - When the filter indicator light changes from green to yellow, order a new filter. When the filter indicator light changes
from yellow to red, it is recommended that you replace the filter. Model TIWB2: Change the water filter cartridge every 6 months
depending upon your usage. If the water flow to the water dispenser or ice maker decreases noticeably before 6 months
have passed, replace the water filter cartridge more often.
The product is for cold water use only.
Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the
system. Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts.
*Class I particle size: >0.5 to <1 um
**Test requirement is at least 100,000 particles/mL of AC Fine Test Dust.
tThese contaminants are not necessarily in your water supply. Performance may vary based on local water conditions.
ttFibers greater than 10 um in length
*Based on the use of Cryptosporidium parvum oocysts
(R)NSF is a registered trademark of NSF International.
Refer to the back cover or "Accessories" section for the Manufacturer's name, address and telephone number.
Refer to the "Warranty" section for the Manufacturer's limited warranty.
Application Guidelines/Water Supply Parameters
Water Supply City or Well Water Pressure 30 - 120 psi (207 - 827 kPa) Water Temperature 33 ° - 100°F (0.6 ° -37.8 ° C) Service Flow Rate 0.5 gpm (1.9 L/min.) @ 60 psi.
11
Loading...
+ 25 hidden pages