Whirlpool GRAND PRIX 2 1600 INSTALLATION

GB GRAND PRIX II 1600

A.Temperature Selection Buttons

B.Programme Sequence Indicator

C.“Start/Pause” Button

D.“Door Open” Indication

E.“Start Delay” Button

F.“Spin Speed Reduction” Button

B C D

A

E

F

: optional / Yes : dosing required

1)For improved garment care spin speed is restricted to 1000 rpm in this programme.

2)For improved garment care spin speed is null in this programme.

									Detergents and additives					Special options			Max	Temperature
								Max Load	Prewash	Main	Softener	Start		Intensive	Rinse	Spin Speed	Spin
Programme			Care				Type of wash/Notes						Prewash				Speed
										Wash		Delay		Rinse	Hold	Reduction
		Labels
								Kg				Start	Voorwas	Intensief	Spoel-	Centrifu-	rpm	°C
												selectie		spoelen	stop	geren
White Cotton							Normally soiled bed linen, table linen and underwear, towels, shirts etc. made of	5.0		Yes								20 to 95
							cotton and linen.										1600
Kookwas
							With heavily soiled laundry the additional “Prewash” option can be selected as well.
Synthetics							Slightly to normally soiled blouses, shirts, overalls etc. made of polyester (Diolen,	2.5		Yes						1)	1000 1)	20 to 60
Synthetisch							Trevira), polyamide (Perlon, Nylon) or blends with cotton.
Daily							Slightly to normally soiled textiles made of cotton and/or synthetics.	3.0	—	Yes	—		—				1400	20 to 60
Gemengde was
Rapid Plus							Slightly soiled overalls and sports wear made of cotton, polyester, polyamide and	3.0	—	Yes			—	—			1600	20 to 60
							blends with cotton.
Snel
							In this programme, selection of “Prewash” and “Intensive Rinse” is not possible.
Delicates							Curtains and delicate clothing, dresses skirts, shirts and blouses.	1.5		Yes				—		1)	1000 1)	20 to 40
Fijne was							“Intensive Rinse” is not possible in this programme.
Wool							Only woollens with a felt-free finish, labelled with the woolmark and identified as	1.0	—	Yes						1)	1000 1)	20 to 40
							machine washable.						—	—
Wol
							If you select “Rinse Hold” do not leave items to soak for too long.
Silk							Textiles made of linen, silk, wool and viscose marked as “handwashable”.	1.0	—	Yes			—	—		2)	0 2)	20 to 30
Zijde							If you select “Rinse Hold” do not leave items to soak for too long. No spinning.
Rinse + spin				—			Same as the last rinse and the final spin in the “Coloured Cotton” programme.	5.0	—	—			—				1600	20
Spoelen & centrifugeren
Spin				—			In this programme spinning is intensive. Same as the spin cycle in the “Coloured	5.0	—	—	—		—	—	—		1600	—
Centrifugeren							Cotton” programme.
Gentle spin				—			In this programme spinning is gentle. Same as the spin cycle in the “Wool”	1.5	—	—	—		—	—	—	1)	1000 1)	—
Kort centrifugeren							programme.
Drain				—			Drain only - no spinning. Alternative method of terminating programme after “Rinse	—	—	—	—		—	—	—	—	—	—
Afpompen							Hold”.

Whirlpool is a registered trademark of Whirlpool USA

5019 301 15075/A

CONSUMPTION DATA

	Temperature Selector	Load	Water	Energy	Approx. Programme
Programme					Duration
	(°C)	(kg)	(l)	(kWh)	(hours : minutes*)
Cotton	95	5.0	44**	1.60	1:55
Cotton	60	5.0	39	0.95	2:00
Cotton	40	5.0	39	0.55	2:00
Synthetics	60	2.5	55	0.70	1:30
Synthetics	40	2.5	50	0.50	1:15
Daily	40	3.0	45	0.50	1:00
Rapid Plus	30	3.0	35	0.40	0:30
Delicates	30	1.5	50	0.50	0:45
Wool	40	1.0	50	0.50	0:40
Silk	30	1.0	35	0.40	0:35

Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized conditions in compliance with Standard IEC 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

* The remaining time indicator can similarly deviate from the values in the table, because it takes into account the household conditions applicable at that time.

**To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add the detergent as described in the chapter “Detergents and Additives” in the booklet.

1.Turn the programme selector knob to the desired programme.

2.The remaining time display shows the duration of the chosen programme (in hours and minutes) and the pilot lamp of the “Start/Pause” button is flashing.

3.The programme sequence and the predefined spin speed indication corresponding to the selected programme lights up.

The recommended temperature (see the indicator) can be altered by pressing “+” or “-” button.

SELECT ANY DESIDERED OPTION

Selecting any option the pilot lamp lights up. Unsuitable combinations of options are deselected automatically.

“Prewash” button

•Only for heavily soiled loads (for example sand, granular dirt) sensible. The cycle time increases approximately 15 min.

“Intensive Rinse” button

•A further rinse cycle is added.

•This option is particularly suitable for areas with very soft water, washing baby linen and helps people with allergies.

“Rinse Hold” button

•The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.

•This option is particularly recommended for the programme “Synthetics” or “Delicates”.

•This function is particularly useful if you want to postpone spinning to a later time.

Note: The programme stops to “Rinse Hold” at the time the “Rinse Hold” button light flashes.

Terminate the “Rinse Hold” option:

•Press the “Rinse Hold” button again; the programme will terminate automatically with the final spin cycle for the present wash programme.

•If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” programme and press the “Start/Pause” button again.

“Spin Speed Reduction” button

•Every programme has an automatic predefined maximum spin speed.

•Press the button to set another spin speed.

•If the spin speed “0” is selected, the final spinning is cancelled. The water is drained out only.

START DELAY

The “Start Delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper.

•Press the “Start Delay” button to select the delay time by 1 to 19 hours;

•Press the “Start/Pause” button. The “Start Delay” light flashes until the programme starts.

•The time delay indication disappears when the programme starts and it’s replaced by the remaining time.

•The number of hours preselected can later be reduced pressing again the “Start Delay” button.

To cancel the “Start Delay”.

•Turn the programme selector to the “” position.

•Reselect the desired programme and options and press the “Start/Pause” button.

PROGRAMME START

Open the tap and press the “Start/Pause” button. The pilot lamp of the “Start/Pause” button lights up.

The indicator lamps show the sequence reached in the programme. After starting the programme, the sequence indication runs from left to right through Wash, Rinse, Spin.

When the sequence of the programme is finished the corresponding lamp goes out.

DOOR LOCK

During the first 15 minutes of the cotton and synthetics programmes the door can be opened for adding further laundry.

The door can be opened when the “Door Open” indication is shining.

PROGRAMME END

•The remaining time is on “0:00” and all the lights of the programme sequence indication are off.

1.Turn the programme selector to the “” position.

2.Turn the water supply tap off.

3.Open the door and unload the machine.

CHANGE THE PROGRAMME, TEMPERATURE, OPTIONS AFTER PROGRAMME START

1.Press the “Start/Pause” button to pause the programme. The light flashes.

2.Select the new programme (with temperature), any options and another spin speed if you want it.

3.Press the “Start/Pause” button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

CANCEL A PROGRAMME BEFORE THE END

1.Press the “Start/Pause” button to pause the programme. The light flashes.

2.Set the programme selector to “Drain”. The spin indicators show “0” and the remaining time shows “0:02”.

3.Press the “Start/Pause” button to start the drain programme.

Whirlpool is a registered trademark of Whirlpool USA

5019 301 15075/A