Whirlpool GR556LRKS, GR556LRKT, GR556LRKB, GR556LRKC, GR556LRKP Dimension Guide

...
0 (0)
Whirlpool GR556LRKS, GR556LRKT, GR556LRKB, GR556LRKC, GR556LRKP Dimension Guide

®

Freestanding Electric Range

PRODUCT MODEL NUMBERS

GR556LRK

Electrical: When a four-wire or three-wire, singlephase, 120/240-volt, 60-Hz, AC-only, electrical supply is available, a 50-amp maximum circuit protection is required, (or, if specified on the model/serial rating plate, when a four-wire or three-wire, single-phase 120/208-volt, 60 Hz, AConly electrical supply is available, a 40-amp maximum circuit protection is required), fused on both sides of the line. A time-delay fuse or circuit breaker is recommended. The model/serial rating plate is located on the oven frame behind the drawer.

OVERALL DIMENSIONS

43" (109.2 cm) overall height

36" (91.4 cm) cooktop height with feet loosened

1-1/2 turns

30"

(76.2 cm)

27-3/4" width

(70.5 cm) depth

When installed in a 24" (61 cm) base cabinet with 25" (63.5 cm) countertop — front of oven door protrudes 1-7/8" (4.8 cm) beyond 24" (61 cm) base cabinet.

CABINET OPENING DIMENSIONS

25" (63.5 cm) countertop depth and 24" (61 cm) base cabinet depth, 36" (91.4 cm) countertop height

18" (45.7 cm) upper side cabinet to countertop

4" (10.2 cm)

min. clearance from both sides of range to side wall or other combustible material.

13" (33 cm) max.

 

 

 

 

 

 

 

 

upper cabinet depth

 

 

 

For minimum

 

 

 

 

 

 

 

clearance to the

 

30" (76.2 cm) min.

 

 

 

top of the

 

cabinet opening width

 

 

 

cooktop, see

 

 

 

 

 

 

 

NOTE.*

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

30" (76.2 cm)

 

 

 

 

 

 

 

opening width

 

 

 

 

 

 

 

 

 

 

 

 

 

receptical or junction box – 8" (20.3 cm) to

22" (55.9 cm) from either cabinet,

7" (17.8 cm) max. from floor.

7/8" (2.2 cm) min. required between

cutout and cabinet door or hinge.

*NOTE: 24" (61 cm) min. when bottom of wood or metal cabinet is protected by not less than 1/4"

(0.64 cm) flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.

30" (76.2 cm) min. clearance between the top of the cooking platform and the bottom of an unprotected wood or metal cabinet.

Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation

Ref. 9758643

Instructions packed with product. Specifications subject to change without notice.

03-30-04

Loading...