Whirlpool GKI 9051/4, CBI 658 W, GKIC 9056/3, AFB 820, GKI 9051/3 INSTRUCTION FOR USE

AKZ 275

SE NO

FI

DK

PRODUCT DESCRIPTION SHEET

Last

First

CHILDREN SAFETY FUNCTION

First-Last... shelf positions

1.Control panel

2.Cooling fan* (not visible)

3.Top heating element (can be lowered)

4.Oven light

5.Round heating element (not visible)

6.Fan

7.Bottom heating element (not visible)

8.Lateral oven light

9.Door hinge

10.Oven cool door

*N.B.: The cooling fan switches on only when the oven or cooktop has reached a certain temperature.

The fan can run at two speeds:

1)Full speed

2)Reduced speed

The fan speed depends on the temperature of the appliances.

After the oven and/or the cooktop switch off, the cooling fan may, however, continue to run for a certain time to ensure proper cooling.

The oven door is provided with a lock device which operates when closing the door.

•To open the door lift and push simultaneously the clip positioned inside the handle and pull the door.

•If the door lock function is not required, unscrew the screw visible on the clip and remove the device.

1.Selector knob: to choose the oven functions.

2.Knob to set: time of day, cooking time, the time at which cooking should terminate, the temperatures, the power levels and the cooking times (Function P).

3.Button to select and confirm the different operations (operate by single presses only).

4.Button to select special function: “Browning” and “Heat Maintenance” .

5.	Control knob for front, left cooking zone*	0				1 ...	10
6.	Control knob for rear, left cooking zone*	0					10
						1 ...
7.	Control knob for rear, right cooking zone*	0					10 __
						1 ...
8.	Control knob for front, right cooking zone*	0					10 __
						1 ...
*)	The cooktop control knobs are not interchangeable. After cleaning or servicing, they must be returned to
	their original positions.

ACCESSORIES			•	Grid		•	Drip tray
(Depending on the model)			•	Baking tray		•	Sliding shelves
OVEN FUNCTIONS TABLE
Function					Preset		Function description
		Function			temperature/
Symbol	Nr.						(see details in the user’s manual)
					level
–	–	OVEN OFF			-	-
–	–	OVEN LIGHT			-	To switch on the oven light.
	2	MLTF			35C	To keep a constant temperature, either 35°C
		(Heat Maintenance)				or 60°C.
	3	STATIC			200C	To cook food at one shelf level. Preheating.
	4	PASTRY			175C	To cook on two shelf levels, at the same
		(Static + Fan)				temperature.
	5	FAN			160C	To cook on more than one shelf level, at the
						same temperature.
	6	TURBOFAN			160C	To cook: large fruitcakes, stuffed vegetables,
						timbales, poultry.
	7	GRILL			3	To grill small pieces of meat, toast, etc.
	8	TURBOGRILL			3	To grill large pieces of meat.
		(Grill + Fan)
	9	PROGRAMME			P1	To bake pizza, bread, focaccia.

Push-Push knobs

•To use this type of knob, press it in the middle.

•Turn the knob to the desired position.

•Once cooking is over, turn the knob back to the off position and press it again to restore it to its initial setting.

COOKTOP FUNCTIONS TABLE

	Function	Function	Function description
	symbol		(see details in the user’s manual)
		HEAT MAINTENANCE	Constant temperature, 60°C.
		DUAL ZONE	To extend the heated area of the second part of oval or
			rectangular cooking zones.
		ICP	To accelerate the heating of the selected cooking zone.
		FAST BOILING	To bring the water to the boil fast.
		GENTLE HEAT	Constant temperature, 35°C.
	1-10	POWER LEVELS	-

STARTING THE OVEN

When the oven is connected to the power supply for the first time, or re-connected after a power failure, the display shows “ ”.

To start the oven:

•Turn knob 1 with index at the top as in Fig.1 of programmer sheet.

•press button 3. The display shows “--:--”.

FOR A DESCRIPTION ON HOW TO USE THE OVEN, PLEASE REFER TO THE PROGRAMMER DESCRIPTION SHEET.

5019 100 54242