GGW9868KT5
GoLd ®
ELECTRONIC
ELECTRICANDGAS
DRYERS
For questions about features, operation/performance,
parts accessories or service call:
1-800-253-1301
In Canada, for assistance, call 1-800-461-5681
for installation and service, call 1-800-807-6777
or visit our website at._www.whirlpool.com
or www.whirlpooLcom/canada
#
SECHEUSES
ELECTRIQUESETA
GAZELECTRONIQUES
Pour assistance, composez le 1-800-461-5681,
pour installation ou service le 1-800-807-6777
ou visitez notre site web &
www.whirlpool.com/canada
Table of Contents/Table des matieres ...................... 2
8579657
TABLEOFCONTENTS TABLEDESMATIERES
DRYER SAFETY .............................................................................. 2
PARTS AND FEATURES ................................................................ 4
CHECKING YOUR VENT ............................................................... 5
DRYER USE .................................................................................... 5
Starting Your Dryer ....................................................................... 5
Stopping, Pausing and Restarting ............................................... 6
Loading ......................................................................................... 6
Drying, Cycle and Temperature Tips ........................................... 6
CYCLES .......................................................................................... 7
Automatic Cycles ......................................................................... 7
Timed Cycles ................................................................................ 7
Air Only Setting ............................................................................ 8
Dryer Features .............................................................................. 8
Additional Features ...................................................................... 8
DRYER CARE ................................................................................. 9
Cleaning the Dryer Location ........................................................ 9
Cleaning the Lint Screen .............................................................. 9
Cleaning the Dryer Interior ........................................................... 9
Removing Accumulated Lint ...................................................... 10
Changing the Drum Light ........................................................... 10
TROUBLESHOOTING .................................................................. 10
ASSISTANCE OR SERVICE ......................................................... 11
WAR RAN TY .................................................................................. 12
SI_CURITI_ DE LA SI_CHEUSE .................................................... 14
PII_CES ET CARACTI_RISTIQUES .............................................. 16
VITRIFICATION DU CONDUIT D'I_VACUATION ......................... 17
UTILISATION DE LA S¢:CHEUSE ................................................ 18
Mise en marche de la secheuse ................................................ 18
Arr_t, pause et remise en marche .............................................. 18
Chargement ................................................................................ 19
Conseils pour sechage, programme et temperature ................. 19
PROGRAMMES ............................................................................ 19
Programmes automatiques ........................................................ 19
Programmes minutes ................................................................. 20
Reglage Air seulement ............................................................... 21
Caracteristiques de la secheuse ................................................ 21
Caracteristiques supplementaires ............................................. 21
ENTRETIEN DE LA SI!:CHEUSE .................................................. 22
Nettoyage de I'emplacement de la secheuse ........................... 22
Nettoyage du filtre h charpie ...................................................... 22
Nettoyage de I'interieur de la s6cheuse ..................................... 23
Enlever la charpie accumulee .................................................... 23
Changement de I'ampoule d'eclairage du tambour .................. 23
DI_PANNAGE ................................................................................. 24
ASSISTANCE OU SERVICE ......................................................... 26
GARANTI E ..................................................................................... 27
DRYERSAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all
safety messages.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or
This is the safety alert symbol.
"WARNING." These words mean:
You can be killed or seriously injured if you don't
immediately follow instructions.
You can be killed or seriously injured if you don't
follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you
what can happen if the instructions are not followed.
i WARNING: For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, or to prevent property damage, personal injury, or death.
- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this
or any other appliance.
- WHAT TO DO IF YOU SMELL GAS:
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any phone in your building.
• Clear the room, building, or area of all occupants.
• Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's
instructions.
• If you cannot reach your gas supplier, call the fire department.
- Installation and service must be performed by a qualified installer, service agency, or
the gas supplier.
IMPORTANT SAFETY INSTRUCTIONS
WARNING-" To reduce the risk of fire, electric shock, or injury to persons when using the dryer, follow basic
precautions, including the following:
[]
Read all instructions before using the dryer.
[]
Do not place items exposed to cooking oils in
your dryer. Items contaminated with cooking oils
may contribute to a chemical reaction that could
cause a load to catch fire.
[] Do not dry articles that have been previously
cleaned in, washed in, soaked in, or spotted with
gasoline, dry-cleaning solvents, other flammable,
or explosive substances as they give off vapors
that could ignite or explode.
[] Do not allow children to play on or in the dryer.
Close supervision of children is necessary when
the dryer is used near children.
[] Before the dryer is removed from service or dis-
carded, remove the door to the drying compart-
ment.
[] Do not reach intothe dryer if the drum ismoving.
[] Do not install or store the dryer where itwill be
exposed to the weather.
[] Do not tamper with controls.
[] Do not repair or replace any part of the dryer or
attempt any servicing unless specifically recom-
mended inthis Use and Care Guide or in published
user-repair instructionsthat you understand and have
the skills to carry out.
[] Do not use fabric softeners or products to eliminate
static unless recommended by the manufacturer of
the fabric softener or product.
[] Do not use heat to dry articles containing foam rubber
or similarly textured rubber-like materials.
[] Clean lint screen before or after each load.
[] Keep area around the exhaust opening and adjacent
surrounding areas free from the accumulation of lint,
dust, and dirt.
[] The interior of the dryer and exhaust vent should be
cleaned periodically by qualified service personnel.
[] See installation instructions for grounding require-
ments.
SAVE THESE INSTRUCTIONS
PARTSANDFEATURES
1. Control panel
2. Model and serial number label
3. Dryer drum
4. Lint screen
5. Wide-opening door
Automatic Cycles
o_ Casual
Additional features your dryer has:
Cycle Signal selector
WRINKLE SHIELD TMselector
SENSEON TMelectronic sensor
Drying rack
Drum light
CHECKING
YOURVENT
Your dryer must be properly installed and vented to achieve
maximum drying efficiency and shorten drying times. Use the
minimum recommended installation clearances found in your
Installation Instructions. Refer to your Installation Instructions for
more information.
Fire Hazard
Use a heavy metal vent.
Do not use a plastic vent.
Do not use a metal foil vent.
Failure to follow these instructions can result in
death or fire.
DRYERUSE
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from dryer.
Do not dry anything that has ever had anything
flammable on it (even after washing).
Failure to follow these instructions can result in
death, explosion, or fire.
If the dryer is not properly installed and vented, it will not be
covered under the warranty.
NOTE: Service calls caused by improper venting will be paid for
by the customer, whether it was a paid installation or self-
installed.
1. Do not use plastic vent or metal foil vent. Use 4 in. (10.2 cm)
metal or flexible metal vent. Do not kink or crush flexible
metal vent. It must be completely extended to allow adequate
exhaust air to flow. Check vent after installation. Refer to your
Installation Instructions for proper length requirements of
vent.
2. Use a 4 in. (10.2 cm) exhaust hood.
3. Use the straightest path possible when routing the vent.
4.
Use clamps to seal all joints. Do not use duct tape, screws or
other fastening devices that extend into the interior of the
vent to secure vent.
5.
Clean exhaust vent periodically, depending on use, but at
least every 2 years, or when installing your dryer in a new
location. When cleaning is complete, be sure to follow the
Installation Instructions supplied with your dryer for final
product check.
Fire Hazard
No washer can completely remove oil.
Do not dry anything that has ever had any type of
oil on it (including cooking oils).
Items containing foam, rubber, or plastic must be
dried on a clothesline or by using an Air Cycle.
Failure to follow these instructions can result in
death or fire.
Before using your dryer, wipe the dryer drum with a damp cloth to
remove dust from storing and shipping. The following steps
provide an overview for operating your dryer. Specific directions
for each step are contained in the following sections.
1. Load clothes loosely into the dryer and close the door. Do not
pack the dryer. Allow space for clothes to tumble freely.
2=
Select one of the Automatic or Timed Cycles. Use the Heavy
Duty, Towels/Cotton or Normal cycles to dry most
heavyweight and medium weight loads. See "Cycles."
3. For Automatic Cycles, select one of the 5 levels of dryness
by pressing the up or down arrows. See "Cycles."
4. For Timed Cycles only, select one of 6 temperature settings.
See "Cycles."
5. Select the WRINKLE SHIELD TM setting, if desired. See
"Additional Features."
6. Select the Cycle Signal, if desired. The signal is helpful when
drying permanent press or synthetics. Promptly remove these
items from the dryer at the end of the cycle to prevent
wrinkles. See "Additional Features."
7. Push the START pad.
You can stop your dryer anytime during a cycle.
To stop your dryer
Press STOP/CANCEL twice.
To restart your dryer
1. Close the door.
2. Push START.
To pause your dryer
Open the door or press STOP/CANCEL once. Close door and
press START to resume the cycle.
NOTE: Drying will continue from where the cycle was interrupted
if you close the door and press START within 5 minutes. If the
cycle is interrupted for more than 5 minutes, the dryer will shut
off. You will need to select new cycle settings before restarting
the dryer.
Load clothes loosely into the dryer. Do not pack the dryer. Allow
space for clothes to tumble freely. The following chart shows
examples of balanced loads that would allow for proper tumbling.
Heavy work 3 pair of pants, 4 pair of jeans,
clothes 2 pair of overalls, 3 shirts
Delicates 3 camisoles, 1 robe, 4 slips,
6 undergarments, 2 sets of sleepwear,
1 child's outfit
Towels 10 bath towels, 10 hand towels,
14 washcloths, 1 bath mat
Select the correct cycle and temperature for your load.
Dryer tips
• Press firmly in the center of the pad.
• The indicator light next to the pad will light up when a
selection is valid.
• A short tone will sound when a selection is valid.
• Three short tones will sound when a selection is not valid.
• After your first use, your dryer "remembers" the Dryness
level, WRINKLE SHIELD TM setting and Cycle Signal setting
you selected.
• If you press and hold the Temp selector, the Cycle Signal
selector or the More Dry or Less Dry arrows, you will advance
the settings.
• If you press and hold the Less Time or More Time arrows in
the Timed Cycles, the time will advance in 5-minute intervals.
Drying tips
• Follow care label directions when they are available.
• If desired, add a fabric softener sheet. Follow package
instructions.
• Remove the load from the dryer as soon as tumbling stops to
reduce wrinkling. This is especially important for permanent
press, knits, and synthetic fabrics.
• Cool Down tumbles the load without heat during the last few
minutes of all cycles. Cool Down makes the loads easier to
handle.
Cycle tips
• Use the Timed Dry cycle with the Air Only (no heat)
Temperature setting for rubber, plastic or heat-sensitive
fabrics.
Temperature tips
If your dryer has multiple heat settings:
• Use a high heat setting for drying heavyweight items such as
towels and work clothes.
• Use a low to medium high heat setting for drying medium-
weight items such as sheets, blouses, dresses, underwear,
permanent press fabrics, and some knits.
• Use an extra low heat setting for drying lightweight items
such as lingerie.
• Use a no heat (air) setting for rubber, plastic or heat-sensitive
fabrics.
• Line dry bonded or laminated fabrics.
If you are unsure of the temperature to select for a load, select
the lower setting rather than the higher setting.
NOTE: If you have questions about drying temperatures for
various loads, refer to the care label directions.
Mixed Load 3 double sheets, 4 pillowcases,
8 T-shirts, 6 pair of shorts, 2 blouses,
8 handkerchiefs
CYCLES
Casual
Select this cycle to dry medium to lightweight synthetic or no-iron
items such as sheets, shirts or dresses. The temperature
automatically defaults to low. Press the Up arrow once to select a
setting closer to More Dry.
Automatic Cycles o_ _ _--'x
Use your Automatic Cycles to dry most loads. Your dryer uses
the SENSEOW M Drying System. Electronic sensors measure the
temperature of the exhaust to increase or decrease drying
temperatures for faster reaction time and tighter temperature
control.
After drying a load in any of the Automatic Cycles, check the
dryness.
• If the load is drier than you like, press the down arrow to
select a setting closer to Less Dry the next time you dry a
similar load.
• If a load is not as dry as you like, complete drying using a
Timed cycle. Press the Up arrow to select a setting closer to
More Dry the next time you dry a similar load.
NOTE: The Up and Down arrows are located next to the
Automatic Cycles pads.
To use the Automatic Cycles
1. Press the desired Automatic Cycles pad.
2. Press the Up or Down arrows to select from 5 levels of More
Dry or Less Dry, if desired.
8. Select the WRINKLE SHIELD TM setting, if desired.
4. Press the Cycle Signal pad to select the cycle signal volume.
5. Press START.
NOTE: The Estimated drying time varies from the actual drying
time with an Automatic cycle. The type of fabric, size of the load,
and the dryness selected affect drying time. See "Drying, Cycle
and Temperature Tips."
Heavy Duty
Select this cycle to thoroughly dry heavyweight items such as
jeans, corduroys or work clothes. The temperature is
automatically set at High.
Towels/Cotton
Select this cycle to dry heavyweight items such as towels, jeans,
and work clothes. The temperature is automatically set at High.
Normal
Select this cycle to evenly dry sturdy casual clothes such as
khakis and cotton jerseys. The temperature is automatically set at
Medium High.
Bulky Items
Select this cycle to dry large bulky items that require very long
drying times, such as quilts and sleeping bags. The temperature
is automatically set at Medium.
O Casual ® Delicate
Delicate
Select this cycle to gently dry items such as exercise wear, sheer
curtains or lace. The temperature is automatically set at Extra
Low.
Your dryer has 3 Timed Cycles: Timed Dry, Rack Dry and Touch
Up. Each cycle has a preset time and temperature setting. You
can customize your Timed Cycles by adding options.
NOTE: If the load is not wet, several of the Status lights will not
be activated when using the Timed Cycles.
To add options to the Timed Cycles
1. Press the desired TIMED CYCLES pad.
2. Press the MORE TIME arrow to select more time, or press the
LESS TIME arrow to select less time.
3. Press the TEMP pad to select a temperature.
More
Timed Cycles
Time
LZLI
Less
Time
4. Select the WRINKLE SHIELD TM setting, if desired.
5. Press the Cycle Signal pad to select the cycle signal, if
desired.
6. Press START.
Timed Dry
Use your Timed Dry cycle to complete drying if items are still
damp after the Automatic cycle.
The Timed Dry cycle has a preset time and temperature. You can
select a different time or temperature, if desired.
Touch Up
Use your Touch Up cycle to remove wrinkles from clean clothes
packed tightly in a suitcase or closet. You can also use Touch Up
to complete drying if items are still damp after the Automatic
cycle.
The Touch Up cycle is preset to 20 minutes at Medium High heat.
You can select a different time or temperature, if desired.
Rack Dry
Use your Rack Dry cycle with the drying rack to dry items that do
not require tumbling.
The Rack Dry cycle is preset to 60 minutes at Air Only
temperature. See "Drying Rack." Items containing foam, rubber,
or plastic must be dried on a clothesline or by using an air cycle.
NOTE: You can select a different time and temperature, if
desired. The WRINKLE SHIELD TM setting is not a selectable
option with the Rack Dry cycle.
UsetheAirOnlysettingforitemsthatrequiredryingwithoutheat
suchasrubber,plasticandheat-sensitivefabrics.Pressthe
TimedDrycycleandselectAirOnlyonthetemperatureselector.
Thischartshowsexamplesofitemsthatcanbedriedusingthe
AirOnlysetting.
Type of Load Air Only setting*
Foam rubber - pillows, padded bras,
stuffed toys 20 - 30
Plastic - Shower curtains, tablecloths 20 - 30
Rubber-backed rugs 40 - 50
Olefin, polypropylene, sheer nylon 10 - 20
*(Minutes) Reset cycle to complete drying, if needed.
When using Air Only
• Check to see that coverings are securely stitched.
• Shake and fluff pillows by hand periodically during cycle.
• Dry item completely. Foam rubber pillows are slow to dry.
Time Display
When you select an Automatic cycle, the estimated time is
displayed and the Estimated Time Remaining light is lit. The
amount of estimated time remaining will be updated
approximately 5 minutes into an automatic cycle. The Estimated
Time Remaining light will turn off, and the display will show the
actual time left in the cycle.
When you select a Timed cycle, the actual time is displayed, and
the Estimated Time Remaining light is off.
Drying Status Lights
You can monitor the progress of your load with the Drying Status
lights.
Status
Q 0 O O 0 O
Sensing Wet Damp Drying & Cycle
Cool Down Complete Wrinkle
Sensing
Turns on until moisture is detected in the clothes. Turns off
after 10 minutes if moisture is not detected. If the Rack Dry
cycle is selected, the light goes directly to Drying & Cool
Down.
Wet
Turns on until moisture is no longer detected in the clothes.
Damp
Turns on for 2 minutes after moisture is no longer detected in
the clothes. At this point, the clothes are approximately 80%
dry. You may want to remove lightweight items in a mixed
load to prevent over drying or remove partially dry items that
may need ironing.
Drying & Cool Down
Turns on until the drying cycle and cool down are complete.
Also turns on when a Timed Dry cycle is selected and
moisture is not detected in the clothes.
WRINKLE SHIELD Setting
Turns on during the WRINKLE SHIELD setting portion of
the cycle. The light flashes when the door is opened.
lrM
TM
Shield
You can customize your cycles by selecting different features. If
you change your mind, select a different feature.
WRINKLE SHIELD TM Setting
When you are unable to remove a load of clothes from the dryer
as soon as it stops, wrinkles can form. The WRINKLE SHIELD TM
setting periodically tumbles, rearranges and fluffs the load to
avoid wrinkles.
Status
0 0 0 0 0
Sensing Wet Damp Drying & O
Cool Down Complete Wrinkle
Select the WRINKLE SHIELD TM setting by pressing the WRINKLE
SHIELD TM setting pad. The WRINKLE SHIELD TM setting
periodically tumbles the load without heat for up to 120 minutes.
During the WRINKLE SHIELD TM setting, you can open the door to
remove clothes, and press the START pad to resume the
WRINKLE SHIELD TM cycle.
Cycle Signal
If the Cycle Signal is selected, the signal sounds when a cycle is
complete. If the WRINKLE SHIELD TM setting is selected, the
signal sounds every few minutes. The signal stops when you
open the door.
® Louder
® Softer
® off
Press the Cycle Signal pad to select a Softer or Louder signal or
to turn the Cycle Signal off.
Drying Rack
Select this feature to dry items such as sweaters and pillows
without tumbling. The drum turns, but the rack does not move.
If your model does not have a drying rack, you may purchase
one. For ordering information, please refer to the "Assistance or
Service" page of this manual. You may also contact the dealer
from whom you purchased your dryer.
To use the drying rack
Do not remove the lint screen.
1. Open the dryer door.
2. Slide drying rack over the bottom of the dryer door opening.
Push down to secure rack on frame.
Place wet items on top of the rack. Leave space between the
items so air can reach all the surfaces. Close the door.
NOTE: Do not allow items to hang over the edge of the rack.
4. Select the RACK DRY cycle. Press the MORE TIME or LESS
TIME arrows, if desired. Press the TEMP pad to select a
temperature. Items containing foam, rubber, or plastic must
be dried on a clothesline or by using an air cycle.
5. Press the START pad.
NOTE: You must remove rack for normal tumbling. Do not
use automatic cycles with the drying rack.
Cycle
Shield
Thischartshowsexamplesofitemsthatcanberackdried.After
selectingtheRackDrycycle,selectthetemperaturesettingand
dryingtimeacrossfromeachitem.
Rack Dry Temp Time*
Wool Sweaters
Block to shape and lay flat on the rack Low 60
Stuffed toys or pillows
Cotton or polyester fiber filled Low 60
Stuffed toys or pillows
Foam rubber filled Air Only 90
Sneakers or canvas shoes Air Only 90
*(Minutes) Reset time to complete drying, if needed. (Drying time
will depend on amount of moisture items hold.)
DRYERCARE
Keep dryer area clear and free from items that would obstruct the
flow of combustion and ventilation air.
2. Push the lint screen firmly back into place.
IMPORTANT:
• Do not run the dryer with the lint screen loose, damaged,
blocked, or missing. Doing so can cause overheating and
damage to both the dryer and fabrics.
Some towels made of synthetic fibers and natural fibers
(polyester and cotton blends) may shed more lint than other
towels, causing your dryer's lint screen to fill up faster. Be
sure to remove lint from the lint screen before and after drying
new towels.
• If lint falls off the screen into the dryer during removal, check
the exhaust hood and remove the lint. See "Checking Your
Vent."
As needed cleaning
Laundry detergent and fabric softener residue can build up on the
lint screen. This buildup can cause longer drying times for your
clothes, or cause the dryer to stop before your load is completely
dry. The screen is probably clogged if lint falls off the screen.
Clean the lint screen with a nylon brush every 6 months or more
frequently if it becomes clogged due to a residue buildup.
To wash
1. Roll lint off the screen with your fingers.
2. Wet both sides of lint screen with hot water.
3. Wet a nylon brush with hot water and liquid detergent. Scrub
lint screen with the brush to remove residue buildup.
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from dryer.
Place dryer at least 18 inches (4G cm) above the
floor for a garage installation.
Failure to do so can result in death, explosion,
or fire.
/1_ _ _ __ I;¸ _
Every load cleaning
The lint screen is located in the door of the dryer. Clean it before
each load. A screen blocked by lint can increase drying time.
To clean
1. Pull the lint screen straight up. Roll lint off the screen with
your fingers. Do not rinse or wash screen to remove lint. Wet
lint is hard to remove.
4. Rinse screen with hot water.
5. Thoroughly dry lint screen with a clean towel. Replace screen
in dryer.
To clean dryer drum
1. Make a paste with powdered laundry detergent and very
warm water.
2. Apply paste to a soft cloth.
OR
Apply a liquid, nonflammable household cleaner to the
stained area and rub with a soft cloth until all excess dye is
removed.
3. Wipe drum thoroughly with a damp cloth.
4. Tumble a load of clean cloths or towels to dry drum.
NOTE: Garments which contain unstable dyes, such as denim
blue jeans or brightly colored cotton items, may discolor the
dryer interior. These stains are not harmful to your dryer and will
not stain future loads of clothes. Dry unstable dye items inside
out to prevent dye transfer.
Loading...