Whirlpool GARF19XXPK00 User Manual

GLADIATOR™ GARAGE REFRIGERATOR

Use & Care Guide

REFRIGERADOR PARA GARAGE GLADIATOR™

Manual de uso y cuidado

RÉFRIGÉRATEUR DE GARAGE GLADIATOR™

Guide d’utilisation et d’entretien

Table of Contents/Índice/Table des matières ............2

2254106

THE BEST GARAGE ON THE BLOCK.™ EL MEJOR GARAGE DE LA CUADRA.™

LE MEILLEUR GARAGE DU QUARTIER.™

TABLE OF CONTENTS

REFRIGERATOR SAFETY.................................................................... 3

Proper Disposal of Your Old Refrigerator..........................................3

INSTALLATION INSTRUCTIONS ........................................................4

Unpack the Refrigerator.....................................................................4

Location Requirements......................................................................4

Electrical Requirements .....................................................................5

Refrigerator Doors..............................................................................5

Adjust the Doors ................................................................................7

Caster Installation...............................................................................7

REFRIGERATOR USE ..........................................................................9

Using the Controls .............................................................................9

ÍNDICE

SEGURIDAD DEL REFRIGERADOR.................................................12

Cómo deshacerse adecuadamente de su refrigerador viejo..........12

INSTRUCCIONES DE INSTALACIÓN...............................................13

Desempaque el Refrigerador ...........................................................13

Requisitos de localización ...............................................................13

Requisitos eléctricos........................................................................14

Puertas del refrigerador ...................................................................14

Ajuste las puertas.............................................................................16

Instalación de las ruedecillas ...........................................................16

USO DE SU REFRIGERADOR ...........................................................18

Uso de los controles ........................................................................18

REFRIGERATOR CARE ....................................................................... 9

Cleaning............................................................................................. 9

Changing the Light Bulbs .................................................................. 9

TROUBLESHOOTING ........................................................................ 10

Refrigerator Operation..................................................................... 10

Temperature and Moisture .............................................................. 10

ASSISTANCE OR SERVICE .............................................................. 10

In the U.S.A...................................................................................... 10

In Canada......................................................................................... 11

WARRANTY ........................................................................................ 11

CUIDADO DE SU REFRIGERADOR................................................. 18

Limpieza........................................................................................... 18

Cómo cambiar los focos ................................................................. 19

SOLUCIÓN DE PROBLEMAS........................................................... 19

Funcionamiento del refrigerador ..................................................... 19

Temperatura y humedad ................................................................. 19

AYUDA O SERVICIO TÉCNICO ........................................................ 20

En los EE.UU. .................................................................................. 20

En Canadá ....................................................................................... 20

GARANTÍA .......................................................................................... 21

TABLE DES MATIÈRES

SÉCURITÉ DU RÉFRIGÉRATEUR ....................................................22

Mise au rebut de votre vieux réfrigérateur.......................................22

INSTRUCTIONS D'INSTALLATION ..................................................23

Déballage du réfrigérateur ...............................................................23

Emplacement d’installation..............................................................23

Spécifications électriques ................................................................24

Portes du réfrigérateur .....................................................................24

Ajustement des portes .....................................................................26

Installation des roulettes ..................................................................26

UTILISATION DU RÉFRIGÉRATEUR................................................28

Utilisation des commandes .............................................................28

ENTRETIEN DU RÉFRIGÉRATEUR.................................................. 29

Nettoyage ........................................................................................ 29

Remplacement des ampoules d’éclairage...................................... 29

DÉPANNAGE ...................................................................................... 29

Fonctionnement du réfrigérateur..................................................... 29

Température et humidité ................................................................. 30

ASSISTANCE OU SERVICE .............................................................. 30

GARANTIE .......................................................................................... 31

REFRIGERATOR SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

You can be killed or seriously injured if you don't immediately

DANGER

WARNING

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING:

■

Plug into a grounded 3 prong outlet.

■

Do not remove ground prong.

■

Do not use an adapter.

■

Do not use an extension cord.

■

Disconnect power before servicing.

■

Replace all panels before operating.

To reduce the risk of fire, electric shock, or injury when using your refrigerator, follow these basic precautions:

SAVE THESE INSTRUCTIONS

follow instructions.

can be killed or seriously injured if you don't

You instructions.

■

Remove doors from your old refrigerator.

■

Use nonflammable cleaner.

■

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

■

Use two or more people to move and install refrigerator.

Proper Disposal of Your Old Refrigerator

WARNING

Suffocation Hazard Remove doors from your old refrigerator. Failure to do so can result in death or brain damage.

IMPORTANT: Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigerators are still dangerous – even if they will sit for “just a few days.” If you are getting rid of your old refrigerator, please follow these instructions to help prevent accidents.

Before You Throw Away Your Old Refrigerator or Freezer:

■ Take off the doors.

■ Leave the shelves in place so that children may not easily climb

inside.

INSTALLATION INSTRUCTIONS

Unpack the Refrigerator

WARNING

Excessive Weight Hazard

Use two or more people to move and install refrigerator.

Failure to do so can result in back or other injury.

Remove the Packaging

■ Remove tape and glue residue from surfaces before turning on

the refrigerator. Rub a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry.

■ Do not use sharp instruments, rubbing alcohol, flammable fluids,

or abrasive cleaners to remove tape or glue. These products can damage the surface of your refrigerator. For more information, see “Refrigerator Safety.”

IMPORTANT: Do not remove the white foam air return insert from behind the control panel on the ceiling of the refrigerator. If the insert is removed, ice may migrate down from the freezer and cause icicles to form.

When Moving Your refrigerator:

Your refrigerator is heavy. When moving the refrigerator for cleaning or service, be sure to protect the floor. Always pull the refrigerator straight out when moving it. Do not wiggle or “walk” the refrigerator when trying to move it, as floor damage could occur.

NOTE: If casters are installed, unlock the casters before trying to move your refrigerator.

Clean Before Using

After you remove all of the package materials, clean the inside of your refrigerator before using it. See the cleaning instructions in “Refrigerator Care.”

Important information to know about glass shelves and covers:

Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. For your protection, tempered glass is designed to shatter into many small, pebble-size pieces. This is normal. Glass shelves and covers are heavy. Use special care when removing them to avoid impact from dropping.

Location Requirements

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

To ensure proper ventilation for your refrigerator, allow for ¹⁄₂" (1.25 cm) space on each side and at the top. When installing your refrigerator next to a fixed wall, leave 2" (5.08 cm) minimum on each side (depending on your model) to allow the door to swing open.

NOTE: Do not install the refrigerator near an oven, radiator, or other heat source where the temperature will rise above 115°F (43°C), nor in a location where the temperature will fall below 0°F (-17°C).

2" (1.25 cm)

2" (5.08 cm)

Electrical Requirements

WARNING

Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death,

fire, or electrical shock.

Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical connection.

Recommended Grounding Method

A 115 Volt, 60 Hz., AC only 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.

NOTE: Before performing any type of installation, cleaning, or removing a light bulb, turn the control (Thermostat, Refrigerator or Freezer Control depending on the model) to OFF and then disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and reset the control (Thermostat, Refrigerator or Freezer Control depending on the model) to the desired setting.

Refrigerator Doors

TOOLS NEEDED: ⁵⁄₁₆" hex-head socket wrench, #2 Phillips screwdriver, flat-blade screwdriver, ⁵⁄₁₆" open-end wrench, flat 2" putty knife.

IMPORTANT:

■ Before you begin, turn the lower compartment control OFF.

Unplug refrigerator or disconnect power.

■ Remove food and adjustable door or utility bins from doors.

■ If you only want to remove and replace the doors, see the

“Remove Doors and Hinges” and “Replace Doors and Hinges.”

■ All graphics referenced in the following instructions are included

later in this section after “Final Steps.”

Remove Doors and Hinges

⁵⁄₁₆

" Hex-Head Hinge Screw

1. Unplug refrigerator or disconnect power.

2. Open lower compartment door and remove base grille from the

bottom front of the refrigerator. See Base Grille graphic.

3. Close the lower compartment door and keep both doors closed

until you are ready to lift them free from the cabinet. NOTE: Provide additional support for the doors while the hinges

are being moved. Do not depend on the door magnets to hold the doors in place while you are working.

4. Remove the parts for the top hinge as shown in Top Hinge

graphic. Lift the upper compartment door free from the cabinet.

5. Remove the parts for the center hinge as shown in the Center

Hinge graphic. Lift the lower compartment door free from the cabinet.

6. Remove the parts for the bottom hinge as shown in the Bottom

Hinge graphic.

Reverse Doors (optional)

IMPORTANT: If you want to reverse your doors so that they open in

the opposite direction, continue with “Reverse Doors (optional)” instructions. If you are not reversing the doors, see “Replace Doors and Hinges.”

Round-Head

Handle Screw

Door Handle

Screw Hole Plug

Door Hinge

Hole Plug

Cabinet

1. Remove ⁵⁄₁₆" hex-head hinge screws from handle side and move

them to opposite side. See Graphic 1-1.

2. Remove cabinet hinge hole plugs from the cabinet top and move

them to opposite side hinge holes as shown. See Graphic 1-2.

Doors

1. Remove door hinge hole plug from top of upper compartment

door. Move to opposite side as shown. See Graphic 2.

2. Remove door stop from both the upper and lower compartment

doors and move to the other side. See Graphic 3.

Replace Doors and Hinges

NOTE: Graphic may be reversed if door swing is reversed.

1. Replace the parts for the bottom hinge as shown. Tighten

screws. Replace the lower compartment door. NOTE: Provide additional support for the doors while the hinges

are being moved. Do not depend on the door magnets to hold the doors in place while you are working.

2. Assemble the parts for the center hinge as shown and tighten all

screws. See Center Hinge graphic. Replace the upper compartment door.

3. Assemble the parts for the top hinge as shown. See Top Hinge

graphic. Do not tighten screws completely.

4. Line up the doors so that the bottom of the upper compartment

door aligns evenly with the top of the lower compartment door. Tighten all screws.

Final Steps

1. Check all holes to make sure that hole plugs and screws are in

place. Reinstall top hinge cover. See Top Hinge graphic. NOTE: On the left-hand side of the base grille there is a

removable tab which is a bottom hinge hole plug. Break off the tab from the base grille and insert the bottom hinge hole plug into the bottom hinge holes. See Base Grille graphic.

2. Replace the base grille. See Base Grille graphic.

3. Plug in refrigerator or reconnect power.

4. Reset the controls. See “Using the Controls.”

5. Return all removable door parts to doors and food to refrigerator.

Door Removal &

Replacement

Door Swing Reversal (optional)

Base Grille

A. Bottom Hinge Hole Plug

Top Hinge

A. Top Hinge Cover

/16" Hex-Head Hinge Screws

B. C. Top Hinge

Center Hinge

1-1

5/16"

Hex-Head Hinge Screws

1-2

A. Cabinet Hinge Hole Plugs

A. Door Hinge Hole Plug

Removal of Door Stops

A. Center Hinge

/16" Hex-Head Hinge Screws

Bottom Hinge

A. Bottom Hinge

/16" Hex-Head Hinge Screws

A. Door Stop

B. Door Stop Screw

Reinstallation of Door Stops

A. Door Stop B. Door Stop Screw

Adjust the Doors

NOTE: If you have the casters installed on your refrigerator, the leveling screws will not work. Shims can be placed under the casters to level a refrigerator that has casters installed.

Caster Installation

WARNING

Door Closing

Your refrigerator has two front adjustable rollers – one on the right and one on the left. If your refrigerator seems unsteady or you want the doors to close easier, adjust the refrigerator's tilt using the instructions below:

1. Plug into a grounded 3 prong outlet.

2. Move the refrigerator into its final location.

3. Remove the base grille. See Base Grille graphic. The two leveling

screws are part of the front roller assemblies which are at the base of the refrigerator on either side.

4. Use a screwdriver to adjust the leveling screws. Turn the leveling

screw to the right to raise that side of the refrigerator or turn the leveling screw to the left to lower that side. It may take several turns of the leveling screws to adjust the tilt of the refrigerator.

NOTE: Having someone push against the top of the refrigerator takes some weight off the leveling screws and rollers. This makes it easier to adjust the screws.

5. Open both doors again and check to make sure that they close

as easily as you like. If not, tilt the refrigerator slightly more to the rear by turning both leveling screws to the right. It may take several more turns, and you should turn both leveling screws the same amount.

6. Replace the base grille.

Door Alignment

If the space between your doors looks uneven, you can adjust it using the instructions below:

1. Pry off the top hinge cover.

2. Loosen the top hinge screws using a ⁵⁄₁₆" socket or wrench.

3. Have someone hold the door in place or put a spacer between

the doors while you tighten the top hinge screws.

4. Replace the top hinge cover.

Excessive Weight Hazard

Use two or more people to move and install refrigerator.

Failure to do so can result in back or other injury.

Gather the required tools and parts before starting installation.

Tools Needed:

■ ¹⁄₂" Socket wrench or nut

driver

■ ¹⁄₂" Wrench

■ ³⁄₈" Socket wrench or nut

driver

Parts Supplied:

■ Rigid Casters (2)

■ Swivel Casters (2)

■ ⁵⁄₁₆–18 Self-locking

hex-nuts (16)

■ ⁵⁄₁₆–18 x ⁷⁄₈" Hex-head

bolts (16)

1. Before you begin, turn the refrigerator control to off.

2. Unplug refrigerator or disconnect power.

3. Remove food and any adjustable shelves and bins from

refrigerator.

4. Open the lower compartment door and remove the base grille.

Remove the grille by grasping the grille with both hands, lifting up and pulling bottom of the grille toward you.

5. Place the plastic skids (shipped with the refrigerator) on the floor

at least 3 ft (91.44 cm) apart. Lay a piece of cardboard or other protective material over the skids. This will elevate the refrigerator to allow for easier caster installation and also protect it from scratches.

NOTE: If the skids have been discarded or are not available, 2" x 4" boards may be used.

6. Place the refrigerator on its side on top of the cardboard or

protective material. Make sure the door hinge is facing upward. IMPORTANT: It is important that the door hinge face upward

during the entire caster installation.

■ ¹⁄₄–20 X 1¹⁄₄" Hex-head

bolts (4)

■ ¹⁄₄–20 x 1¹⁄₄" lock washers (4)

■ Caster brackets (located in

FeaturePak) (2)

■ Plastic skids (shipped with

the refrigerator)

A. Top hinge B. Center hinge

7. Remove the casters and fasteners from the box.

8. Locate and remove the caster brackets from the FeaturePak.

9. Using ⁵⁄₁₆–18 x ⁷⁄₈” hex-head bolts, attach one rigid caster and

one swivel caster to each caster bracket. The rigid caster fits the front of the bracket and the swivel caster fits on the rear.

10. Insert the hex-head bolts from the bottom and start the self-

locking nuts for each caster.

A B

A. Self-locking nut B. Caster bracket

11. Hold the head of the hex-head bolts with a wrench while

tightening the self-locking nuts with a socket wrench.

12. Using a ¹⁄₂" socket wrench, remove the four unit bolts (two on

each side) from the lower front and rear of the refrigerator. NOTE: Do not remove leveling bolt.

⁵⁄₁₆

–18 x

D. Caster

⁷⁄₈

" Hex-head bolt

Lower Rear Corner

A. Rear unit hole B. Caster bracket

14. Hold the bracket in place and insert the unit bolts into the front

and rear unit holes and tighten.

NOTE: Do not overtighten the bolts.

15. Insert two of the ¹⁄₄–20 x 1¹⁄₄" hex-head bolts and lock washers

into the two holes in the side of the caster bracket. Push the caster bracket against the bottom of the refrigerator and tighten the bolts using a ³⁄₈" socket wrench.

Lower Front Corner

Leveling bolt (do not remove)

B. Unit bolt

13. Place the slot in the rear of the caster bracket over the unit hole

in the rear of the refrigerator. Align the hole in the front of the caster bracket with the unit hole in the front of the refrigerator.

A. Caster bracket holes

16. Repeat steps 12–14 for the other caster bracket.

Complete the Installation

1. Lock the front casters. NOTE: Locking the casters will help prevent the refrigerator from

moving while it is being lifted.

2. Insert a small piece of cardboard between the caster brake and the floor. This will help prevent the brake from rubbing on the floor.

3. Stand the refrigerator upright.

4. Replace the base grille by placing the metal clips in the openings

in the metal panel and rolling the grille downward until it snaps into place.

5. Unlock the casters and move the refrigerator into its final location.

6. Lock the casters.

7. Plug in refrigerator or reconnect power.

REFRIGERATOR USE

WARMER

COOLER

RECOMMENDED SETTING

REFRIGERATOR

WARMER

COOLER

RECOMMENDED SETTING

FREEZER

ALLOW 24 HOURS BETWEEN ADJUSTMENTS

REFRIGERATOR CARE

Using the Controls

For your convenience, your refrigerator controls are preset at the factory. When you first install your refrigerator, make sure that the controls are still preset to the mid-settings as shown.

NOTE: To turn your refrigerator off, turn the refrigerator control to the word OFF or until the word OFF appears. Your product will not cool when the refrigerator control is set to OFF.

Mid-setting “3”

Mid-setting “4”

REFRIGERATOR

IMPORTANT:

■ Give your refrigerator time to cool down completely before

adding food. It is best to wait 24 hours before you put food into the refrigerator.

■ If you add food before the refrigerator has cooled completely,

your food may spoil. Adjusting the Refrigerator and Freezer Controls to a higher (colder) than recommended setting will not cool the compartments any faster.

Adjusting Controls

The mid-settings indicated in the previous section should be correct for normal household usage. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm.

If the temperature is too warm or too cold in the refrigerator or freezer, first check the air vents to be sure they are not blocked.

If you need to adjust temperatures, use the settings listed in the chart below as a guide. On models with two controls, adjust the refrigerator temperature first. Wait at least 24 hours between adjustments and then recheck the temperatures.

CONDITION/REASON: ADJUSTMENT:

REFRIGERATOR too warm REFRIGERATOR or

FREEZER too warm FREEZER or TEMPERATURE

REFRIGERATOR too cold REFRIGERATOR or

FREEZER too cold FREEZER or TEMPERATURE

TEMPERATURE Control one setting higher

Control one setting higher

TEMPERATURE Control one setting lower

Control one setting lower

FREEZER

Cleaning

WARNING

Explosion Hazard Use nonflammable cleaner. Failure to do so can result in death, explosion, or fire.

Both the refrigerator and freezer sections defrost automatically. However, clean both sections about once a month to prevent odors from building up. Wipe up spills immediately.

IMPORTANT: Because air circulates between both sections, any odors formed in one section will transfer to the other. You must thoroughly clean both sections to eliminate odors. To prevent odor transfer and drying out of food, wrap or cover foods tightly.

To Clean Your Refrigerator:

NOTE: Do not use abrasive or harsh cleaners such as window

sprays, scouring cleansers, flammable fluids, cleaning waxes, concentrated detergents, bleaches or cleansers containing petroleum products on plastic parts, interior and door liners or gaskets. Do not use paper towels, scouring pads, or other harsh cleaning tools.

1. Unplug refrigerator or disconnect power.

2. Hand wash, rinse, and dry removable parts and interior surfaces

thoroughly. Use a clean sponge or soft cloth and a mild detergent in warm water.

3. Wash stainless steel and painted metal exteriors with a clean

sponge or soft cloth and a mild detergent in warm water.

4. There is no need for routine condenser cleaning in normal home

operating environments. If the environment is particularly greasy or dusty, or there is significant pet traffic in the home, the condenser should be cleaned every 2 to 3 months to ensure maximum efficiency.

If you need to clean the condenser:

■ Remove the base grille.

■ Use a vacuum cleaner with a soft brush to clean the grille,

the open areas behind the grille and the front surface area of the condenser.

■ Replace the base grille when finished.

5. Plug in refrigerator or reconnect power.

Changing the Light Bulbs

NOTE: Not all bulbs will fit your refrigerator. Be sure to replace the bulb with one of the same size, shape, and wattage.

1. Unplug refrigerator or disconnect power.

2. Remove the bulb from behind the control panel in the refrigerator

or from behind the light shield in the freezer (on some models). Replace it with a bulb of the same wattage.

3. Plug in refrigerator or reconnect power.

WARMER

1 2

F E R

RECO

COOLER

FREEZER

RECOMMENDED SETTING

T A R

E G I

ING

ETT

D S DE N

E M M

COOLER

S T

N E M

S U J

D A

N E E

W T E

B S R

U O

H 4 2

O L L A

TROUBLESHOOTING

Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.

Refrigerator Operation

The refrigerator will not operate

■ Power cord unplugged? Plug into a grounded 3 prong outlet.

■ Is outlet working? Plug in a lamp to see if the outlet is working.

■ Household fuse blown or circuit breaker tripped? Replace the

fuse or reset the circuit breaker.

■ Is control on? Make sure the refrigerator control is on. See

“Using the Control.”

■ New installation? Allow 24 hours following installation for the

refrigerator to cool completely. NOTE: Adjusting the temperature control to coldest setting will

not cool the refrigerator more quickly.

The motor seems to run too much

Your new refrigerator may run longer than your old one due to its high-efficiency compressor and fans. The unit may run even longer if the room is warm, a large food load is added, the door is opened often, or if the door has been left open.

The refrigerator seems noisy

Refrigerator noise has been reduced over the years. Due to this reduction, you may hear intermittent noises from your new refrigerator that you did not notice from your old model. Below are listed some normal sounds with explanations.

■ Pulsating - fans/compressor adjusting to optimize performance.

■ Hissing/Rattling - flow of refrigerant, movement of water lines,

or from items placed on top of the refrigerator.

■ Popping - contraction/expansion of inside walls, especially

during initial cool-down.

■ Water running/dripping - may be heard when water melts

during defrosting and runs into the drain pan.

The door will not close completely

■ Door blocked open? Move food packages away from door.

■ Bin or shelf in the way? Push bin or shelf back in the correct

position.

The door is difficult to open

■ Gaskets dirty or sticky? Clean gaskets and contact surfaces

with mild soap and warm water. Rinse and dry with soft cloth.

Temperature and Moisture

Temperature is too warm

■ New installation? Allow 24 hours following installation for the

refrigerator to cool completely.

■ Door opened often or left open? Allows warm air to enter

refrigerator. Minimize door openings and keep door fully closed.

■ Large load of food added? Allow several hours for refrigerator

to return to normal temperature.

■ Control set correctly for the surrounding conditions? Adjust

the control a setting colder. Check temperature in 24 hours. See “Using the Control.”

There is interior moisture buildup

NOTE: Some moisture build-up is normal.

■ Humid room? Contributes to moisture build-up.

■ Door opened often or left open? Allows humid air to enter

refrigerator. Minimize door openings and keep door fully closed.

ASSISTANCE OR SERVICE

Before calling for assistance or service, please check “Troubleshooting.” It may save you the cost of a service call. If you still need help, follow the instructions below.

When calling, please know the purchase date and the complete model and serial number of your appliance. This information will help us to better respond to your request.

If you need replacement parts

If you need to order replacement parts, we recommend that you only use factory specified replacement parts. Factory specified replacement parts will fit right and work right because they are made with the same precision used to build every new Gladiator GarageWorks appliance.

To locate factory specified replacement parts in your area, call us or your nearest designated service center.

In the U.S.A.

Call the Gladiator™ GarageWorks Customer eXperience Center toll free: 1-866-342-4089.

Our consultants provide assistance with:

■ Features and specifications on our full line of products.

■ Installation information.

™

■ Use and maintenance procedures.

■ Accessory and repair parts sales.

■ Specialized customer assistance (Spanish speaking, hearing

impaired, limited vision, etc.).

■ Referrals to local dealers, repair parts distributors, and service

companies. Gladiator technicians are trained to fulfill the product warranty and provide after-warranty service, anywhere in the United States.

To locate the Gladiator company in your area, you can also look in your telephone directory Yellow Pages.

™

GarageWorks designated service

™

GarageWorks designated service

For further assistance

If you need further assistance, you can write to Gladiator™ GarageWorks with any questions or concerns at:

Gladiator Customer eXperience Center 553 Benson Road Benton Harbor, MI 49022-2692

Please include a daytime phone number in your correspondence.

™

GarageWorks

+ 22 hidden pages