Whirlpool EXCELLENCE WAT 1200/1 INSTRUCTION FOR USE

GB EXCELLENCE WAT 1200/1 PROGRAMME CHART
BFCAGD E
Programme
Cotton
Koch-Buntwäsche
Synthetics
Pflegeleicht
Daily Mixed
Mischwäsche
Delicates
Feinwäsche
Rapid
Schnelle Wäsche
Wool
Wolle
Handwash
Handwäsche
Rinse + Spin
Spülen + Schleudern
Spin
Schleudern
Gentle spin
Schon Schleudern
Drain
LÖSCHEN-Abpumpen
N.B. This machine is controlled by sensors. Please avoid excessive detergent dosing.
Care
Labels
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.
For heavily soiled laundry the additional “Prewash” option can be selected as well.
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.
Slightly to normally soiled textiles made of cotton and/or synthetics Curtains and delicate clothing, dresses, skirts, shirts and blouses.
This is the perfect programme for even most delicate lingerie. Shortly worn outer clothing made of cotton, polyester, polyamide or blends with
cotton. Only woollens with a felt-free finish, labelled with the woolmark and identified as
machine washable.
If you select “Rinse Hold” do not leave items to soak for too long.
Textiles made of silk, linen, wool and viscose marked as “handwashable”.
If you select “Rinse Hold” do not leave items to soak for too long. If you select “Rinse Hold” do not leave items to soak for too long. A very gentle spin is used in this programme.
Programme for treating the laundry with starch and softener or to moisten the laundry .
For delicate laundry reduce the spin speed.
Programme to spin cotton or linen laundry intensively with maximum spin speed.
Programme to spin delicate laundry gently with a restricted spin speed.
Drain only - no spinning. Alternative method of terminating programme after “Rinse
Hold”.
Type of wash/ Notes
A. “Water Stop” Indication
- Can be released by excess foaming or a leak in the washing machine.-
B. “Water Tap” Indication
- Check your washing machine’s water supply.-
When you select an option, the corresponding indicator lights up, except if the combination of programme, additional options and temperature is not possible.
C. Temperature Selection Buttons D. “Programme Sequence” Indicator E. “Spin Speed Reduction” Button F. “Start Delay” Button G. “Start/Pause” Button
Max.
kg
5.0
2.0
3.0
1.5
3.0
1.0
1.0
5.0
5.0
1.5
Detergents and additives Special Options Temp era -
Pre-
Main
wash
1)
1)
1)
Softener Bleach Easy
Wash
Yes
Yes
Yes Yes Yes
Yes
Yes
Yes
❉❉❉❉ ❉❉ ❉ ❉
❉ ❉ ❉
—— — — — — — — —— — — — — — —
Ironing
Leicht
Bügeln
— ——
Pre-
wash
Vor-
wäsche
❉❉ ❉ ❉ ❉ ❉
——— —
——— —
——— —
———
: option / Yes: dosing required
1
Do not use liquid detergents.
2
For improved garment care spin speed is restricted to 1000 rpm in this programme.
3
For improved garment care spin speed is restricted to 400 rpm in this programme.
Intensive
Rinse
Intensiv Spülen
Rinse Hold
Spül-
stopp
Spin Speed
Reduction
Drehzahl-
reduzierung
❉❉ ❉ ❉
❉❉❉ ❉❉❉
❉❉❉
❉❉❉
❉❉ ❉ ❉
❉❉ ❉❉
——— — — — — — — —
°C
Max.
Spin
Speed
rpm
Start
Delay
Start-
vorwahl
ture
20 to 95 1200
20 to 60
1000
30 to 60 1200 20 to 40
1000
20 to 30 1200
20 to 40
20 to 30
1000
3)
400
1200
1200
— —
1000
——
5019 412 10057
2)
2)
2)
2)
CONSUMPTION DATA
Programme
Temperature
Selector
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approx. Programme
Duration
(hours : minutes)* Cotton 95 5.0 49** 1.60 2:05 Cotton 60 5.0 48 0.85 2:15 Cotton 40 5.0 48 0.70 2:00
Synthetics 60 2.0 55** 0.80 1:30 Synthetics 40 2.0 50 0.50 1:15
Daily Mixed 40 3.0 45 0.45 1:00
Delicates 40 1.5 50 0.50 0:45
Rapid 30 3.0 35 0.40 0:30 Wool 40 1.0 55 0.60 0:45
Handwash 30 1.0 40 0.40 0:35
Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. The data on the “Energy Label” refer to the programme “Cotton 60°C”. * The remaining time indicator can similarly deviate from the values in the table, because it takes into account the
household conditions applicable at that time.
**To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump
drains the water out.
PREPARATION OF WASH CYCLE
1. Close the drum doors and check that they are properly locked.
2. Add detergents and additives into the dispenser to no more then the
“MAX”
level mark, as
follows:
• Programme with pre and main wash
• Main wash programme without prewash
• Fabric softeners and conditioners
• Chlorine bleach
• Stain remover agents
• Anti-scale agents (if necessary)
3. Turn the
programme selector knob
to the desired programme. The remaining time display shows the duration of the chosen programme (in hours and minutes) and the indicator light of the
button flashes.
Pause”
“Start/
The programme sequence and the predefined spin speed indication corresponding to the selected programme lights up.
The preselected temperature can be altered by pressing the “+” or “-” button.
SELECT THE DESIRED OPTION
When you select an option authorized by the programme, the corresponding indicator lights up, except if the combination of programme, additional options and temperature is not possible.
“Easy Ironing” button
• Can be used together with “Cotton”, “Synthetics” and “Daily Mixed” programmes to make ironing easier.
• Increases the water quantity in rinsing and the clothes are spun in a softer manner.
“Prewash” button
• Only for heavily soiled loads (for example sand, granular dirt).
“Intensive Rinse” button
• The amount of water is increased to ensure a more intensive rinse.
• This option is particularly suitable for areas with very soft water or washing linen laundry for people with skin allergies.
“Rinse Hold” button
• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from fading.
• This option is particularly recommended for the “Synthetics”, “Delicates” and “Daily Mixed” programmes.
• This function is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.
The programme with “Rinse Hold” stops
Note:
when the “Rinse Hold” indicator light flashes on the “Programme Sequence Indicator”.
Appliance in “Rinse Hold”:
• Press the “Rinse Hold” button again: the programme will terminate automatically with the selected spin cycle.
• If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” programme and press the
“Start/Pause”
button again.
“Spin Speed Reduction” button
• Every programme has an automatically allocated maximum spin speed.
• Press the button to set another spin speed. If the spin speed “0” is selected, the final spin is
cancelled, but not the intermediate spins. The programme ends with a drain cycle.
START DELAY
The “Start Delay” button allows the user to run the machine at his convenience, for example at night when electricity is cheaper.
• Select programme, temperature and options.
• Press the “Start Delay” button several times to select the delay time by 1 to 19 hours;
•Press the light of the
“Start/Pause”
“Start/Pause”
button. The indicator
button lights up and
the lamp of the “Start Delay” button flashes.
• The time delay indication disappears when the programme starts and is replaced by the remaining time.
• The number of hours preselected can be reduced later by pressing the “Start Delay” button again.
To cancel the “Start Delay” option
• Turn the programme selector to the “ ” position.
• Reselect the desired programme and options and press the
“Start/Pause”
button.
PROGRAMME START
Turn on the tap and press the
“Start/Pause”
button. The indicator light of the
“Start/Pause”
button lights up. The indicator lamp shows the sequence reached by the programme. After starting the programme, the programme sequence indicator signals the Wash, Rinse and Spin phases.
: If there is a power interruption or if the
Note
appliance is disconnected during the cycle, the programme will run again from the point where it was interrupted.
LID LOCK
For safety reasons, the lid is locked during certain phases of the cycle. At the end of the cycle or during an interruption, the lid unlocks automatically after about 1 minute.
RED INDICATIONS
“Water Stop”
Lighting up of the Aquastop indication can be caused by a leak in the appliance or hose. Please refer to the “Troubleshooting Guide” in the Instructions for Use.
“Water Tap”
The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.
END OF WASH CYCLE
• The remaining time is on “0: 00” and the “End” lamp lights up.
1. Turn the programme selector to the “
position.
2. Turn the tap off.
Open the lid and the drum doors and unload the
3.
machine.
allow the inside of the appliance to dry
Leave the lid open for some time to
.
CHANGE THE PROGRAMME OR OPTIONS DURING THE CYCLE
1. Select the new programme using the
programme selector. If necessary, select the additional options and the spin speed. The luminous indicator of the
“Start/Pause”
button flashes. Note: the “Start Delay” and “Prewash” options cannot be selected after a programme change.
2.
Press the
“Start/Pause”
button. The new programme selected continues at the same position where the previous programme was interrupted.
Do not add detergent for this programme.
Note:
PAUSE/INTERRUPT A PROGRAMME
If, for any reason, you wish to interrupt the programme for a certain time and continue it later:
1. Press the
“Start/Pause”
button. The light flashes.
2. After the desired pause, press again on the
“Start/Pause”
button.
CANCEL PROGRAMME
1. Set the programme selector to “Drain”.
2. Press the
“Start/Pause”
button to start the “Drain” programme.
5019 412 10057
Loading...