Whirlpool EXCELLENCE WAT 1200 INSTRUCTION FOR USE

GB WAT 1200 SILENCE

BFCAGD E

Programme

Cotton

Koch-Buntwäsche

Synthetics

Pflegeleicht

Daily Mixed

Mischwäsche

Delicates

Feinwäsche

Rapid

Schnelle Wäsche

Wool

Wolle

Handwash

Handwäsche

Rinse + Spin

Spülen +

Schleudern

Spin

Schleudern

Gentle spin

Schon-

schleudern

Drain

LÖSCHEN-

Abpumpen

N.B. This machine is controlled by sensors. Please avoid excessive detergent dosing.

Care

Labels



—

Type of wash / Notes

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen. For heavily soiled laundry the additional “Prewash” option can be selected as well.

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Slightly to normally soiled textiles made of cotton and/or synthetics. 3.0

Curtains and delicate clothing, dresses, skirts, shirts and blouses. 1.5 Shortly worn outer clothing made of cotton, polyester, polyamide and

blends with cotton. Only woollens with a felt-free finish, labelled with the woolmark and

identified as machine washable. If you select “Rinse Hold” do not leave items to soak for too long.

Textiles made of silk, linen, wool and viscose marked as “handwashable”. If you select “Rinse Hold” do not leave items to soak for too long. A very gentle spin is used in this programme.

Programme for treating the laundry with starch and softener or to moisten the laundry. For delicate laundry reduce the spin speed to 400 800 rpm.

Programme to spin cotton or linen laundry intensively with maximum spin speed.

Programme to spin delicate laundry gently with a restricted spin speed. 1.5

Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”.

When you select an option, the corresponding indicator lights up, except if the combination of programme, additional options and temperature is not possible.

: Option

❉

Yes: dosing required

Do not use liquid detergents.

For improved garment care spin speed is restricted to 1000 rpm in this programme.

For improved garment care spin speed is restricted to 400 rpm in this programme.

Rinse

Spin Speed

Hold

Reduction

Spülstopp

Schleudern

❉

❉❉❉

❉

❉❉

Max.

load

5.0

2.0

3.0

1.0

5.0

A. “Water Stop” Indication B. “Water Tap” Indication C. Temperature Selection Buttons D. “Programme Sequence” Indicator E. “Spin Speed Reduction” Button F. “Start Delay” Button G. “Start/Pause” Button

Detergents and additives Special Options

Pre-

Main

wash

❉

—

❉

—

Softener Bleach Easy

Wash

Yes

❉❉❉❉❉❉❉❉

❉

❉ ❉

❉

Ironing

Leicht

Bügeln

— — —— ——— —

——— —

———

Pre-

Intensive

wash

Vor-

wäsche

Rinse

Intensiv

Spülen

❉❉ ❉❉❉

❉

—

❉

❉❉ ❉ ❉

—

❉❉ ❉ ❉

—— — — — — — —

—— — — — — — —❉

———— ————— —

Start

Delay

Start--

vorwahl

❉

Tempera-

ture

°C

20 to 95 1200

20 to 60 1000

30 to 60 1200

20 to 40 1000

20 to 30 1200

20 to 40 1000

20 to 30 400

—

——

Max.

Spin

Speed

rpm

1200

1000

5019 412 10017

CONSUMPTION DATA

Programme

Cotton Cotton

Synthetics

Daily Mixed

Delicates

Rapid

Wool

Handwash

Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized conditions in compliance with standard IEC 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

The data on the “Energy Label” refer to the programme “Cotton 60° C”.

* The remaining time indicator can similarly deviate from the values in the table, because it takes into account the

household conditions applicable at that time.

**To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump

drains the water out.

Temperature Selector

(°C)

95/40 5.0 49**/48 1.60/0.60 2:00/2:05

60 5.0 48 0.95 2:05

60/40 2.0 54/50 0.70/0.50 1:30/1:15

40 3.0 45 0.45 1:00 40 1.5 50 0.50 0:45 30 3.0 35 0.40 0:30 40 1.0 50 0.50 0:45 30 1.0 35 0.40 0:35

PREPARATION OF WASH CYCLE

1. Close the drum doors and check that they are properly locked.

2. Add detergents and additives into the dispenser to no more than the

“MAX“

mark, as follows:

• Programme with pre and main

wash

• Main wash programme without prewash

• Fabric softeners and conditioners

• Chlorine bleach

(4 chamber models only)

• Stain remover agents

Anti-scale agents (if necessary)

•

3. Turn the

programme selector knob

desired programme. The remaining time display shows the duration of the chosen programme (in hours and minutes) and the indicator light of the

“Start/Pause”

button flashes. The programme sequence and the predefined spin speed indication corresponding to the selected programme lights up.

The preselected temperature can be altered by pressing the “+” or “-” button.

SELECT THE DESIRED OPTION

When you select an option authorized by

level

to the

Load

(kg)

Water

(l)

Energy

(kWh)

Approx. Programme

Duration

(hours : minutes)*

“Easy Ironing” button

• Can be used together with “Cotton”, “Synthetics” and “Daily Mixed”

programmes to make ironing easier.

• Increases the water quantity in rinsing and the clothes are spun in a softer manner.

“Prewash” button

• Only for heavily soiled loads (for example sand, granular dirt).

“Intensive Rinse” button

• The amount of water is increased to ensure a more intensive rinse.

• This option is particularly suitable for areas with very soft water, washing baby linen and people with skin allergies.

“Rinse Hold” button

• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from fading.

• This option is particularly recommended for the “Synthetics”, “Delicates” and “Daily Mixed” programmes.

• This function is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.

The programme with “Rinse Hold” stops

Note:

when the “Rinse Hold” indicator light flashes on the “Programme Sequence Indicator”.

the programme, the corresponding indicator lights up, except if the combination of programme, additional options and temperature is not possible.

Appliance in “Rinse Hold”:

• Press the “Rinse Hold” button again: the programme will terminate automatically with the selected spin cycle.

• If you do not wish to spin the clothes, turn the programme selector knob to the

“Drain” programme and press the “

” button again.

Pause

Start/

“Spin Speed Reduction” button

• Every programme has an automatically allocated maximum spin speed.

• Press the button to set another spin speed.

• If you want to cancel the final spin, select

the rinse hold option and drain the water after the cycle has finished (see

in “Rinse Hold”

Appliance

START DELAY

The “Start Delay” button allows the user to run the machine at his convenience, for example at night when electricity is cheaper.

• Select programme, temperature and options.

• Press the “Start Delay” button several times to select the delay time by 1 to 19 hours;

• Press the “

Start/Pause

indicator light of the

” button. The

“Start/Pause”

button lights up and the lamp of the “Start Delay” button flashes.

• The time delay indication disappears when the programme starts and is replaced by the remaining time.

• The number of hours preselected can be reduced later by pressing the “Start Delay” button again.

To cancel the “Start Delay” option

• Turn the programme selector to the “” position.

• Reselect the desired programme and options and press the “

Start/Pause

”

button.

PROGRAMME START

Turn on the tap and press the “

Start/Pause

button. The indicator light of the “

” button lights up. The indicator lamp

Pause

Start/

”

shows the sequence reached by the programme. After starting the programme, the programme sequence indicator signals the Wash, Rinse and Spin phases.

: If there is a power interruption or if the

Note

appliance is disconnected during the cycle, the programme will run again from the point where it was interrupted.

LID LOCK

For safety reasons, the lid is locked during certain phases of the cycle. At the end of the cycle or during an interruption, the lid unlocks automatically after about 1 minute.

END OF WASH CYCLE

• The remaining time is on “0:00” and all the lights of the programme sequence indication are off.

1. Turn the programme selector to the “” position.

2. Turn the tap off.

3. Open the lid and the drum doors and unload the machine.

CHANGE THE PROGRAMME OR OPTIONS DURING THE CYCLE

1. Select the new programme using the programme selector. If necessary, select the additional options and the spin speed. The luminous indicator of the

“Start/Pause”

button flashes.

the “Start Delay” and “Prewash”

Note:

options cannot be selected after a programme change.

2. Press the

“Start/Pause

” button. The new programme selected continues at the same position where the previous programme was interrupted.

Do not add detergent for this

Note:

programme.

PAUSE/INTERRUPT A PROGRAMME

If, for any reason, you wish to interrupt the programme for a certain time and continue it later:

1. Press the

“Start/Pause”

button. The light

flashes.

2. After the desired pause, press again on the

“Start/Pause”

button.

CANCEL PROGRAMME

1. Set the programme selector to “Drain”.

2. Press the

“Start/Pause”

button to start the

“Drain” programme.

5019 412 10017